• Title/Summary/Keyword: 충인

Search Result 5,920, Processing Time 0.032 seconds

Short-range Monitoring of Marine AtoN Charge and Discharge Controller (해상용 항로표지 충·방전조절기의 근거리 모니터링)

  • Ye, Seong-Hyeon;Han, Soonhee
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.19 no.4
    • /
    • pp.933-939
    • /
    • 2015
  • If the Visual Aids(light wave signs) is not supplied the general power it is using solar power system. These power supply systems, the role of the charge/discharge control is very important. Introduction of IT(AIS etc.) for the effective management of the AtoN(Aids to Navigation) is a Visual Aids has been added to the device using the power to charge/discharge control, the need increases. The current charge/discharge controller is attached to the inside of the AtoN and checks on and verification of the maritime environment, depending on the difficulty. In order to resolve these issues in this paper, the Bluetooth module is mounted on the inside of the charge/discharge controller and proposed a possible system monitoring at close range. Advantage of the system implemented is a simple configuration and low installation cost. In addition, it can be applied to a variety of AtoN. Also, it has been able to check the real-time status information of the charge/discharge controller at a short distance in to reduce inspection costs, and reduce risk factors that might occur during check.

Searching the Damaged Pine Trees from Wilt Disease Based on Deep Learning (딥러닝 기반 소나무 재선충 피해목 탐색)

  • ZHANGRUIRUI, ZHANGRUIRUI;YOUJIE, YOUJIE;Kim, Byoungjun;Sun, Joonam;Lee, Joonwhoan
    • Smart Media Journal
    • /
    • v.9 no.3
    • /
    • pp.46-51
    • /
    • 2020
  • Pine wilt disease is one of the reasons that results in huge damage on pine trees in east Asia including Korea, Japan, and China, and early finding and removing the diseased trees is an efficient way to prevent the forest from wide spreading. This paper proposes a searching method of the damaged pine trees from wilt disease in ortho-images corrected from RGB images, which are captured by unmanned aviation vehicles. The proposed method constructs patch-based classifier using ResNet18 backbone network, classifies the RGB ortho-image patches, and make the results as a heat map. The heat map can be used to find the distribution of diseased pine trees, to show the trend of spreading disease, and to extract the RGB distribution of the diseased areas in the image. The classifier in the work shows 94.7% of accuracy.

State Space Averaging Based Analysis of the Lithium Battery Charge/Discharge System (상태공간평균에 의한 리튬전지 충방전 시스템의 해석)

  • Won, Hwa-Young;Chae, Soo-Yong;Hong, Soon-Chan
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.14 no.5
    • /
    • pp.387-396
    • /
    • 2009
  • The life and performance of lithium battery are greatly influenced by the formation process which is essential in the process of manufacture. Charge/discharge system for the lithium battery are required for the formation process. To simulate such a system in a conventional method takes very long time and requires huge memory space to save data files. So the simulation may be impossible with a general-purpose PC. In this paper, the lithium battery is modelled to a resistor-capacitor serial circuit and the lithium battery charge/discharge system is analyzed and simulated by using state space averaging method. As a result, the simulation time is reduced dramatically and the simulation of the lithium battery charge/discharge system becomes possible on a general-purpose PC within 3 hours. Also, both the charge/discharge characteristics and the time required to charge/discharge of the lithium battery charge/discharge system can be observed. To verify the propriety of resistor-capacitor serial circuit modeling method for lithium battery and the validity of the analysis and simulation based on state space averaging, the lithium battery charge/discharge system is composed and experimentations are carried out.

A Greenhouse, Diseases and Insects Monitoring System based on PDA for Mobile Users (모바일 사용자를 위한 PDA 기반의 온실 및 병해충 모니터링 시스템)

  • Sim, Chun-Bo;Lim, Eun-Cheon
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.12 no.12
    • /
    • pp.2315-2322
    • /
    • 2008
  • The requesting a consultation of the farm manager is about the diagnosis and prevention of the breeding and extermination for diseases and insects in greenhouse, the managing problem for diseases and insects turn up a main issue. To solve these problems, this paper proposes a PDA based greenhouse, diseases and insects management system for mobile(GDIMS) uses as keeping up with ubiquitous time, which makes prediction and management for diseases and insects more efficiently checked at any time and anywhere you want to, and go well with the motto of ubiquitous. This system is using the environmental data from the greenhouse attached sensors provide the accurate diagnosis and recipes, which supports to product clean crops. There are no need to visit the greenhouse because our system is based on mobile devices that obtain the information in the greenhouse, which makes management in efficient with little number of people. This wort builds simply virtual greenhouse model that assembles system component of environmental sensor for performance analysis and offers a PDA view of the greenhouse status.

Monitoring System of AtoN Charge and Discharge Controller (항로표지 충·방전조절기의 모니터링 시스템)

  • Ye, Seong-hyeon;Han, Soonhee
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2014.10a
    • /
    • pp.639-642
    • /
    • 2014
  • If the power of the general is not supplied, Visual aids utilize solar power system. The power supply system of these, the role of the power regulator to manage the charging and discharging is very important. In recent years, by introducing the IT technology for the effective management of visual aids, it was supposed to add a device that uses the power consumption. Thus, the importance of power regulator has increased. Currently, the power regulator is installed inside the AtoN, if the accessibility is not ensured, there is a difficulty that can not be checked. In order to solve these problems, in this paper, you have installed the Blue-tooth module to the power regulator. Also, by using the Blue-tooth communication function of a smart phone, a radio check has implemented a possible monitoring system. Advantage of the system implemented is a simple configuration and low installation cost. Also, it is possible to check the state information of the real-time power supply regulator. In addition, it has the effect of preventing accidents and reducing costs of inspection.

  • PDF