• Economic and Environmental Geology
• /
• v.42 no.1
• /
• pp.9-25
• /
• 2009

The Northwestern Okcheon Metamorphic Belt in the Chungju area consists of the Munjuri Formation, the Daehyangsan Quartzite, the Hyangsanri Dolomite, and the Gyemyeongsan Formation, but the stratigraphy is still controversial. For a stratigraphic study, detailed stratigraphic sections were measured in two locations and mapping was carried out in the study area. The Munjuri Formation and the Daehyangsan Quartzite changed gradually in north and south section, but bedding parallel faults have developed in the boundary between two formations. The Daehyangsan Quartzite and the Hyangsanri Dolomite are conformable. Fault have developed in boundary between the Hyangsanri Dolomite and the Gyemyeongsan Formation. As a result of mapping in the study area, folding was recognized with $41^{\circ}/280^{\circ}$ plunging axis in the north part of the study area. Therefore, the bedding-parallel faults in the boundary might have occurred resulting from a layer parallel slip during the folding as well as the thrust. These results from this study and previous studies indicate that bedding-parallel faults in boundary between the Munjuri Formation and the Daehyangsan Quartzite are caused by a layer parallel slip during the folding. The fault between the Hyangsanri Dolomite and the Gyemyeongsan Formation is considered as a thrust fault, thereby the uppermost Gyemyeongsan Formation is placed under the Munjuri Formation. However the Gyemyeongsan Formation and the Munjuri Formation have similar age and rock composition. Hence, the Gyemyeongsan Formation is considered as an equivalent one with the Munjuri Formation. Therefore, the stratigraphy of Northwestern Okcheon Metamorphic Belt consists of the Gyemyeongsan/ Munjuri formations, the Daehyangsan Quartzite, and the Hyangsanri Dolomite in ascending order.

• Proceedings of the KSEEG Conference
• /
• 2002.04a
• /
• pp.327-328
• /
• 2002

• The Journal of Engineering Geology
• /
• v.13 no.1
• /
• pp.67-82
• /
• 2003

Pumping test data obtained from five natural mineral-water producing companies (Siwon Saemmul, Daejeong Eumryo, Jain Guanguang, Cheongsu Eumryo and Hanju Sikpum) that are located within 1 km radius around Mockcheon area were analyzed. Theis(1935), Papadopulos-Cooper(1967), Hantush(1960, 1962), Hantush-Jacob(1955), Moench(1985), Neuman-Witherspoon(1969), Gringarten-Witherspoon(1969) and Gringarten-Ramey(1974) equations were applied to the pumping test analysis. The result of the pumping test analysis shows that wedge-typed confined aquifer model (Hantush, 1962) and leaky confined aquifer Case-1 model (Moench, 1985) were suitable for the study area. The models match well with geologic structure in the study area which controls aquifer by means of two major thrust faults having Nl8E and NS strikes, respectively.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.4
• /
• pp.349-359
• /
• 2020

The Ulsan Fault Zone (UFZ) of NNW trend is developed in the Gyeongsang Basin, the southeastern part of the Korean Peninsula, and the Quaternary faults have been found around the UFZ. The faults generally thrust the Bulguksa igneous rocks of Late Cretaceous-Early Tertiary upon the Quaternary deposits or are developed within the Quaternary deposits. They mainly show the reverse-slip sense of top-to-the west movement. The lines connecting the their outcrop sites show a zigzag-form which is similar to the orientation of their fault surfaces which show the various trends, like (W)NW, N-S, (E)NE, ENE trends. The E-W trending dextral strike(-slip) fault is found in the Quaternary deposits of the Singye-ri valley. It cuts the N-S trending reverse fault and are cut by the N-S trending thrust fault again. Two types of at least two times of Quaternary tectonic movements related to the formation of neotectonic fault zone in the Singye-ri valley are considered from such the geometric and kinematic characteristics of Quaternary faults. One is the reverse faulting of N-S trend by the E-W directed 1st compression and associated the strike-slip tear faulting of E-W trend, and then the thrust faulting of N-S trend by the E-W directed 2nd compression. The other is the reverse faulting of N-S trend, and then the dextral strike-slip faulting of E-W trend by the NW-SE directed compression, and then the thrust faulting of N-S trend. In this paper is suggested the development history of Singye-ri neotectonic fault zone on the basis of the various orientations of Quaternary fault surfaces around the UFZ, and the zigzag-form connecting line of their outcrop sites, and the compressive arc-shaped lineaments which convex to the west reported recently in the Yangsan Fault Zone.

• The Journal of the Petrological Society of Korea
• /
• v.11 no.3_4
• /
• pp.234-249
• /
• 2002

The Miwon-Boeun area in the central and northern part of Okcheon metamorphic zone, Korea, is composed of Okcheon Supergroup and Mesozoic Cheongju and Boeun granitoids which intruded it. The Okcheon Supergroup consists mainly of quartzite (Midongsan Formation), meta-calcareous rocks (Daehyangsan Formation, Hwajeonri Formation), meta-psammitic rocks (Unkyori Formation), meta-politic rocks (Munjuri Formation), meta-conglomeratic rocks (Hwanggangni Formation) in the study area, showing a zonal distribution of NE trend. Its' general trend is locally changed into NS to EW trend in and around high-angle fault of NS or NW trend. This study focused on deformation history of the Okcheon Supergroup, suggesting that the geological structure was formed at least by four phases of deformation. (1) The first phase of deformation occurred under ductile shear deformation of top-to-the southeast movement, forming sheath fold or A-type fold, asymmetric isoclinal fold, NW-SE trending stretching lineation. (2) The second phase of deformation took place under compression of NW-SE direction, forming subhorizontal, tight upright fold of M trend in the earlier phase, and formed semi-brittle thrust fault (Guryongsan Thrust Fault) of top-to-the southeast movement and associated snake-head fold in the later phase. (3) The third phase of deformation formed subhorizontal, open recumbent fold through gravitational or extensional collapses which might be generated from crustal thickening and gravitational instability. (4) The fourth phase of deformation formed moderately plunging, steeply inclined kink fold related to high-angle faulting, being closely connected with the local change of NE-trending regional foliation into NS to EW direction of strike in the vicinity of the high-angle fault.

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2003.05a
• /
• pp.84-85
• /
• 2003

소백산육괴의 동부에 분포하는 영양-울진지역의 선캠브리아기 변성암류는 평해층, 기성층, 원남층, 평해화강편마암, 하다우백질화강편마암 등으로 구성되어 있다(김옥준 외, 1963). 그러나, 최근 김남훈 외(2001, 2002)은 야외조사연구와 암석학적 및 지구화학적 연구를 통하여 주로 변성화산암류로 기재되었던 기성층은 변성화산암류가 아니라 평해층과 원남층에서 산출되는 화강암질편마암과 각섬암 기원의 변성암류가 연성전단변형을 받아 형성된 압쇄암 내지 초압쇄암으로 되어 있고, 기존의 기성층은 변성화산암류와 같이 성분상으로 구분되는 별개의 층이 아닌 구조적으로 만들어진 연성전단대의 중심부일 가능성을 시사한 바가 있다. 본 연구는 연성전단대의 연장성 및 연성전단대 형성과 관련된 지구조운동의 특성을 파악하고, 중첩된 변형구조들의 선후관계로부터 영양-울진지역 선캠브리아기 변성암류에 대한 변형작용사를 규명하기 위해 기성층의 분포지를 중심으로 이 지역 선캠브리아기 변성암류에 대한 상세한 야외지질조사를 실시하였다. 그 결과, 예천(북후면-평은면)지역을 통과하여 봉화 부근에서 동북동-서남서 방향이 동-서 방향으로 전환하여 장군봉지역까지 연장되는 것으로 알려져 있는 우수 주향 이동성 예천전단대(KIGAM, 1995; 강지훈 외 1997; 강지훈, 2000; 강지훈과 김형식, 2000)는 영양-울진지역까지 연장됨이 확인된다. 또한, 영양-울진지역의 선캠브리아기 변성암류에는 연성전단변형 이전에 적어도 한 번의 습곡작용과 이후에 적어도 두 번의 습곡작용이 인지된다. 각 변형단계별 특징적인 구조요소를 요약하면 다음과 같다. D1 변형: 편마면 내지 편리(S0)가 습곡되어 형성된 F1 습곡은 동-서 방향의 준 수평적인 습곡축을 갖는 뿌리 없는 등사습곡 형태로 인지된다. 양 날개부의 S0 엽리는 F1 습곡축면(S1)으로 완전히 전위된 하나의 엽리(S0-1)로 나타나고, S0-1 엽리는 이 지역의 광역엽리로 인지된다. S0-1 광역엽리는 구성암류의 대상 분포 방향과 유사한 서북서 주향에 북쪽으로 중각 경사하는 집중된 방향성을 보이며 분산되어 나타난다. D2 변형: 변형구조로는 신장선구조, 압쇄구조면, 비대칭습곡 등으로 인지된다. 신장선구조는 S0-1 엽리면상에서 주로 신장된 석영(집합체)과 장석(집합체)들의 정향배열에 의해 정의되고, S0-1 엽리의 주향 방향으로 저각으로 침강하는 집중된 방향성을 보이며 분산되어 나타난다. 신장선구조에 평행하고 S0-1 엽리에 수직한 단면에서는 상부-동쪽-이동의 우수주향 이동성 연성 전단운동감각을 지시하는 구조요소들이 다량 관찰된다. 연성전단변형에 의해 형성된 압쇄구조면은 전단엽리와 압쇄엽리에 각각 해당하는 C면과 S면 등이 인지된다. 전단엽리 C면은 S0-1 광역엽리와 거의 일치하고, 압쇄엽리 S면은 F2 비대칭습곡의 축면엽리와 거의 일치한다. S0-1 엽리를 습곡시키는 F2 비대칭습곡은 S0-1 엽리를 전단면으로 하여 상부-동쪽-이동 전단운동에 의해 형성된 밀착습곡 형태로 인지된다. F2 습곡축은 북동 방향으로 중각 내지 저각 침강하고 F1 습곡축과는 65$^{\circ}$-75$^{\circ}$ 범위의 사이각을 이룬다. F2 습곡축면은 동북동 주향에 북쪽으로 중각으로 경사하고 F1 습곡축면과는 20$^{\circ}$-40$^{\circ}$ 범위의 사이각을 이룬다. D3 변형. S0-1 엽리와 압쇄구조면 등을 습곡시키는 F3 습곡은 준 수평적인 습곡축과 습곡축면을 갖는 개방 횡와습곡의 형태로 인지된다. D4 변형: F4 습곡은 비대칭 공역성 킹크습곡, 공역성 충상단층에 수반되어 나타나는 드래그습곡, 대칭 개방 직림습곡 등의 다양한 습곡 형태로 인지된다. 이들 F4 습곡의 축면엽리는 일반적으로 동-서 주향에 남쪽과 북쪽으로 경사한다. 그 경사각은 비대칭 공역성 킹크습곡(저각), 드래그습곡(중각), 대칭 개방 직립습곡(고각) 순으로 고각을 이룬다. F4 습곡축은 동쪽과 서쪽으로 저각 침강하는 집중된 방향성을 보인다. 공역성 충상단층은 동-서 주향에 남쪽과 북쪽으로 경사하는 단층면과 상부가 북쪽과 남쪽으로 충상하는 운동상을 보인다. 드래그습곡의 축면엽리는 이러한 공역성 충상단층운동의 전단압축방향에 수직으로 발달한다. 이러한 D4 변형구조는 남-북 방향의 압축 지구조 환경하에서 형성된 것으로 고찰된다.

• The Journal of the Petrological Society of Korea
• /
• v.17 no.2
• /
• pp.83-94
• /
• 2008

The Pungcheon-myeon, Andong, consists mainly of Precambrian metamorphic rocks, Jurassic igneous rocks, Cretaceous sedimentary rocks (Hasandong, Jinju and Iljik Formations) and Cretaceous igneous rocks (gabbroic rocks, dykes), in which several major faults are developed; Andong fault of ENE trend, which is the boundary fault of the Cretaceous Gyeongsang Basin and the Precambrian-Jurassic basement (Yeongnam Massif), Namhu fault parallel to it, Maebong fault of NNW direction, bow-shaped Gwangdeok fault of ENE direction which is convex toward SSE direction, and Hahoe fault of NNE direction. This paper is researched the geological structures around these major faults by means of the detailed geometric analysis on beddings, joints, faults and drag folds. As a result, a reverse slip faulting of top-to-the SSE movement accompanied with a regional drag folding is recognized from the arrangement of bedding poles measured around the Gwangdeok and Hahoe faults at its northeastern extension, and a zone of Gwangdeok drag fold of 150-300 m width, which is wider at the central and eastern parts of Gwangdeok fault and narrower at its western part and Hahoe fault, is also defined. It indicates that the Hahoe and Gwangdeok faults are a single fault and their movements are coeval unlike the results of earlier reasearchers. And, In this area are recognized two types of faults [(E)NE${\sim}$EW(fault I), WNW${\sim}$NNW (fault II), trending faults] and four types of joints [EW (I), (N)NW (II), NNE (III), NE (IV) trending joints]. These fractures were formed at least through four different events, named as Dn to Dn+3 phases. (1) Dn phase; the formation of joint (I) (Gwangdeok joint) and the intrusion of acidic dykes of EW trend under the compression of EW direction. (2) Dn+1 phase; the formations of joint (II) (Maebong joint), lens-shaped boudinage of acidic dykes, oblique-slip reverse fault (Fault I-Gwangdeok fault) under the compression of (N)NW direction, and the formation of regional zone of Gwangdeok drag fold accompanying the Gwangdeok faulting. (3) Dn+2 phase; those of joint (III), Fault II (Maebong fault) by dextral strike-slip movement of Maebong joint under the compression of NNE direction, and the extension cutting of Dn+1 structures due to the Maebong faulting. (4) Dn+3 phase; the jointing (IV) and the reactivation of Fault II as oblique-slip type with predominant dextral motion which took place under the compression of NE direction. It also suggests that the Maebong fault is not a tear fault deveolped during thrust tectonics of the Andong and Gwangdeok faults but is a post-fault during different tectonic event.

• Journal of the Korean earth science society
• /
• v.43 no.1
• /
• pp.151-164
• /
• 2022

According to the records of historical and instrumental earthquakes, the southeastern part of the Korean Peninsula is considered the highest seismic activity area. Owing to recent reports of numerous Quaternary faults along the Yangsan and Ulsan fault zones, paleoseismological studies are being actively conducted in these areas. The study area is located in the central part of the Ulsan fault zone, where the largest number of active faults have been reported. Based on lineament and geomorphic analysis using LiDAR images and aerial photographs, fault-related landforms showing topographic relief were observed and a trench survey was conducted. The trench length 20 m, width 5 m, depth 5 m is located approximately 300 m away to the northeast from the previously reported Malbang fault. From the trench section, we interpreted the geometric and kinematic characteristics of the fault based on the deformed features of the Quaternary sedimentary layers. The attitude of the reverse fault, N26°W/33°NE, is similar to those of the reported faults distributed along the Ulsan fault zone. Although a single apparent displacement of approximately 40 cm has been observed, the true displacement could not be calculated due to the absence of the slickenline on the fault plane. Based on the geochronological results of the cryogenic structure proposed in a previous study, the most recent faulting event has been estimated as being earlier than the late Wurm glaciation. We interpreted the thrust fault system of the study area as an imbrication structure based on the previous studies and the fault geometry obtained in this additional trench. Although several previous investigations including many trench surveys have been conducted, they found limited success in obtaining the information on fault parameters, which could be due to complex characteristics of the reverse fault system. Additional paleoseismic studies will contribute to solving the mentioned problems and the comprehensive fault evolution.

• Economic and Environmental Geology
• /
• v.43 no.6
• /
• pp.637-648
• /
• 2010

The Songbong Formation (so-called Bangrim Group), correated to the lower part of Choseon Supergroup, unconformably overlies the Precambrian Gyeonggi massif at northeastem tip of the Ogcheon belt The contact relationship between the Choseon Supergroup and the Yeongnam massif is also known as an unconformity at northeastem part of the Ogcheon belt. lt implies that the Gyeonggi and Yeongnam massifs were probably connected each other before the Early Paleozoic. Three deformational phases are recognized in the study area, The first phase is the north-northeastward ductile thrusting, which places Precambrian granite of the Gyeonggi massif over the Paleozoic rocks of the Ogcheon belt. The second phase is characterized by the southeastward thrusting and deformation partitioning along the Nuruhaji compartment fault. The third phase is the reactivation of the Nuruhaji Fault into dextral strike-slip fault with over a few kilometers displacement.

• Economic and Environmental Geology
• /
• v.49 no.4
• /
• pp.315-323
• /
• 2016

This study reports a gneiss dome in the Hongseong area, southwestern margin of the Gyeonggi massif. This gneiss dome, named here as 'Oseosan dome' because it is located around the Oseosan, the highest peak along the western coastal area, is composed mainly of the Neoproterozoic to Paleozoic ortho- and paragneiss, mafic metavolcanic rock, and metadolerite. Migmatization affected these rock units, in which leucocratic(granitic) materials derived from anatexis frequently occur as patch and vein parallel to or cutting through internal foliation. The Oseosan dome shows overall concentric geometry and outward-dipping internal foliation, but also partly complicatedly changeable or inward-dipping foliation. Taking available petrological and geochronological data into account, the Oseosan dome is interpreted to be exhumed quickly into the upper crustal level during the Late Triassic, accompanied in part with anatexis and granite intrusion. In addition, extensional shear zone intruded by the Late Triassic synkinematic granite and sedimentary basin have been reported around the Oseosan dome. These evidences possibly suggest that the Oseosan dome formed in closely associated with the Late Triassic extensional movement and diapiric flow. Alternatively, 1) thrust- or reverse fault-related doming or 2) interference between independent folds during structural inversion of the Late Traissic to Middle Jurassic sedimentary basin can be also considered as dome-forming process. However, considering the northern limb of the Oseosan dome, cutting by the Late Traissic granite, and the southern limb, cutting by contractional fault reactivated after the Middle Jurassic, it is likely that the domal structure formed during or prior to the Late Triassic.