• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.433-437
• /
• 1998

Equalize SOC of the cell which effect on the charge.discharge ability and the efficiency of the battery, through the charge.discharge characteristic test of the battery source, and develope the high efficiency charge.discharge system in the series HEV have a constant engine-generator output. For this, in this paper, establish the electrical model and the condition of high efficiency charge.discharge, and proposed the improvement method of charge.discharge characteristic in the battery source that consist of twenty Ni-MH cells connected serial/parallel

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.113-114
• /
• 2015

본 논문은, 태양광 및 차세대 이동수단에 적용되는 리튬-이온 전지의 전기적 모델링를 수행하였다. 전지의 전기적 모델링을 통하여 충 방전 특성, 용량, 개방 전압, 내부 저항과 같은 전지의 특성을 모의함으로써, 다양한 환경에서 어플리케이션에 적용할 전지를 테스트해 볼 수 있다. 리튬-이온 전지는 LGD 18650 B4(2,600mAh) 모델을 사용하였으며, 실험과 시뮬레이션을 통하여 설계된 모델의 타당성을 검증한다.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.5
• /
• pp.69-75
• /
• 2013

To increase the efficiency of the photovoltaic, almost photovoltaic appliances are controlled by Maximum Power Point Tracking(MPPT). Existing most of the PV MPPT techniques have used power which multiplies sensed output current and voltage of the solar cell. However, these algorithms are unnecessarily complicated and too expensive for small and compact system. The other hand, the proposed MPPT technique is only one sensing of the MPPT converter's output current, so there is no need to insert another sensors of battery side. Therefore, this algorithm is simpler compared to the traditional approach and is suitable for low power solar system. Further, the novel proper charge/discharge algorithm for the battery with PV MPPT is developed. In this algorithm, there is CC battery charge mode and load discharge mode of the PV cell & battery dual. Also we design current control to regulate allowable current during the battery charging. The proposed algorithm will be applicable to battery included solar cell applications like solar lantern and solar remote control car. Finally, the proposed method has been verified with computer simulation.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.475-476
• /
• 2010

본 논문은 에너지 저장장치로 각광받는 Li 배터리를 이용한 양방향 DC-DC컨버터의 구성 및 빠른 통특성을 갖는 이중 루프 PI제어기 설계를 제시하였다. 제어기는 초기 충전을 위한 정전류 제어기와 초기 충전 이후에 동작을 개시하는 전력제어기를 구성하였다. 배터리 모델링 및 양방향 DC-DC 컨버터용 제어기는 PSIM을 이용한 시뮬레이션을 통하여 검증하였으며, 그 타당성을 실험을 통하여 확인하였다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.148-149
• /
• 2012

본 논문은 HEV용 고출력 리튬 폴리머 배터리(LI-PB)의 수학적 모델링 기법을 제안한다. 비선형 시스템인 리튬 폴리머 배터리의 전기화학적 특성을 수학적인 상태 방정식으로 표현하고, 배터리 셀의 직접적인 충/방전, 온도 실험을 통하여 셀 모델의 파라미터를 추출하고 표현된 상태 방정식으로 최소의 오차를 가지는 파라미터를 구한다. 대용량 충방전기를 사용한 실험으로 본 연구의 적합성을 입증하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.216-219
• /
• 2021

In the Eco-Friendly Ship Act, the shaft generator is an equipment for eco-friendly ships. However, in order to apply the new technology in ships, high reliability is required, and the HILS (hardware in loop system) test is used as a verification method for this. Therefore, in this paper, a shaft generator is modeled and simulated for HILS test of a tugboat to which a shaft generator is applied. Through simulation, it was verified that the charging/discharging of the shaft generator operates according to the scenario.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.6
• /
• pp.2979-2984
• /
• 2013

This paper proposes a modeling and controller design method of Flywheel Energy Storage System(FESS) for solving the unstable operation problem in hybrid generation system with wind turbine and diesel generator applied in island area. FESS is considered as a permanent magnetic synchronous machine connected to flywheel because of its efficiency. The controller of FESS is composed of AC/DC/AC back-to-back converter. The AC/DC converter is designed to charge/discharge according to the frequency variation and the DC/AC converter to operate to keep the DC bus voltage constant. The proposed modeling and controller design method of FESS was applied to hybrid generation system with wind turbine and diesel generator. The unstable operation problem owing to wind variations was solved through simulation results.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.2
• /
• pp.150-157
• /
• 2014

Li-Ion battery is used in the most satellites now due to advantages such as weight, thermal dissipation and self discharge compared to the previous generations of electrochemical batteries. The performance analysis model of the Li-Ion battery is needed to aid the design of new satellite electrical power subsystem. This paper develops the performance analysis model of the Li-Ion battery to apply to the electrical power subsystem design and energy balance analysis on geostationary orbit. The analysis model receives the satellite bus power, solar array power and battery temperature and gives the battery voltage, charge and discharge currents, taper index, state of charge and power dissipation. The results from the performance analysis are compared and analyzed with the flight data to verify the model. The compared results show satisfactory without significant difference with the flight data.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.3
• /
• pp.227-233
• /
• 2011

This paper proposes a design and experiment of three phase interleaved dc-dc converter for 5kW battery charger. The charger consists of a three-phase interleaved dc-dc converter, which interfaces batteries and DC link, and a grid connected inverter. Lead-acid battery is modeled in a simple R-C model by matlab. Parameters of the battery are estimated based on step current discharging test. The battery is connected to three-phase interleaved DC-DC converter in order to reduce the ripple current to the battery and so, increase the lifetime of battery. Controller for charging and discharging mode is designed and tested in a 5kW charger prototype.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.3
• /
• pp.227-234
• /
• 2014

Fuel consumption rates of electric vehicles strongly depend on their battery performance. Because the battery performance is sensitive to the operating temperature, temperature management of the battery ensures its performance and durability. In particular, the temperature distribution among modules in the battery pack affects the cooling characteristics. This study focuses on the thermal modeling of a battery pack to observe the temperature distribution among the modules. The battery model is a prismatic model of 10 NiMH battery modules. The thermal model of the battery consists of heat generation, convective heat transfer through the channel and conduction heat transfer among modules. The heat generation is calculated by the electric resistance heat during the charge/discharge state. The model is used to determine a strategy for proper thermal management in Electric vehicles.