• Journal of Navigation and Port Research
• /
• v.31 no.5 s.121
• /
• pp.333-338
• /
• 2007

In this paper, we have studied the ship collision avoidance support on the basis of 'Ship Collision Avoidance Model considered a Speed' for the purpose of the decrease of the human error, caused ship collisions, at sea and the effective support of avoiding ship collisions. The program has been reflected the speed of a target ship, had not been considered in a preceding study. Besides, the program will effectively support a maneuver for a collision avoidance, through the display of a feasible area and the method of a collision avoidance using the own ship's turning characteristic about the action of target ship's course and velocity.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.6
• /
• pp.104-109
• /
• 2004

On this paper study is concentrated on the breakup and atomization characteristics of spray formed by impinging jet injectors(like-doublet) used in liquid rocket engine(LRE). On the process of breakup and atomization, injection velocity and ambient gas pressure are the main parameters, so that these are used as variables that specify the experimental condition. Injection velocity varied from 3m/s to 30m/s and ambient gas pressure changed from 0.1MPa to 4.0MPa with nitrogen gas. As results, measured physical quantities decreased with increasing injection velocity and ambient gas pressure. But the decreasing ratios are different from those of the theory.

• Composites Research
• /
• v.25 no.6
• /
• pp.191-197
• /
• 2012

In this paper, the penetration behavior of carbon/epoxy composite laminates subjected to high velocity projectile impact was studied by numerical simulation. The composite laminates made of carbon/epoxy with $[45/0/-45/90]_{ns}$ stacking sequence and the spherical steel impactor were three-dimensionally modeled. The ply numbers of 16 and 24 and the impact velocities in the range of 140-250 m/s were considered. The analysis was performed using an explicit finite element code LS-DYNA. The residual velocity and the amount of damage were predicted and compared to the experimental results.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.225-232
• /
• 2003

With an aim placed on its exploitation on practical injector design, liquid phase mixing due to unlike split triplet impinging element is experimentally investigated by a series of cold tests. Non-reacting kerosene/water spray simulates the kerosene/LOX propellant combination. Measurements of local mixture ratio distribution were made for different injection configurations and different momentum ratios. Mixing and mixing controlled characteristic velocity efficiencies are measured in terms of oxidizer/fuel jet momentum ratio from 0.5 to 8. Extent of mixing and its influence on hot performance are estimated in terms of mixing efficiency and mixing controlled characteristic velocity. Envelope of design locus for optimum mixing quality and corresponding maximum hot performance are proposed. Effects of momentum ratio, orifice diameter ratio and jet velocity ratios are also presented and discussed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.487-488
• /
• 2011

As the increase in maritime traffic and leisure, the marine accident risk has increased in the domestic coast. In this paper, we propose how to analysis for risk of collision between a small vessel and to close multiple vessels or obstacles using fuzzy logic in maritime. the speed of aboard vessel, the number of obstacle within radius 1km and the number of obstacle within 15 degrees left and right are considered as fuzzy sets.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.393-395
• /
• 2015

IEEE 802.11 무선 랜은 단말들 간의 채널을 공유하기 위해 CSMA/CA(Carrier Sense Multiple Access with Collision Avoidance) 기반의 DCF(Distributed Coordination Function) 프로토콜을 제공한다. DCF는 네트워크상의 단말수가 증가할수록 충돌 확률이 증가하여 전체적인 성능 감소를 야기한다. 이는 네트워크에 있는 모든 단말이 동시에 채널 경쟁을 하기 때문이다. 충돌 확률을 줄이고 성능을 향상시키기 위해 단말을 여러 그룹으로 나누고 각 그룹에 속하는 단말들간 채널 경쟁을 수행하는 가상 그룹 방법이 제안되었다. 그러나 가상 그룹 방법은 각 단말이 독립적으로 그룹 수를 결정하고 자신이 어느 그룹에 속해 동작할지 결정한다. 따라서 단말마다 서로 그룹 수가 다를 수 있고 단말이 하나도 포함되지 않은 그룹이 존재할 수 있다. 즉, 가상 그룹 방법은 단말간 공평성 문제가 있고 오동작 가능성이 있다. 이 문제를 해결하기 위해 본 논문에서는 비지톤과 타이머를 이용하여 단말간 동기화를 맞춰 그룹 수 및 자신의 그룹 번호를 독립적으로 결정하는 방법을 제안한다. 그룹 수는 현재 채널 경쟁 수준을 고려하여 결정한다. 단말들의 그룹화를 통해 충돌확률을 줄이고 네트워크 성능을 향상시킨다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.75-75
• /
• 2010

배변 후 toilet flushing 시 다량의 세균을 포함한 물방울들이 화장실 곳곳으로 퍼지는 현상이 있다. 이러한 현상을 방지하기 위해 변기 뚜껑에 자기 세정 효과를 갖는 초발수 표면을 위해 플라즈마를 이용한 표면 처리가 시도되고 있으며, 이 연구의 일환으로 flushing시의 변기내의 유동 분석을 초고속 카메라를 이용하여 수행하였다. Toilet flushing 시 물 튀김 현상은 육안으로는 잘 관찰하기 어렵지만 최고 1000 frame/sec의 속도를 갖는 CCD camera를 이용하여 정량적으로 물 튀김에 의한 오염 가능성을 촬영 분석하였다, 두 번째로 소변 시의 변기 표면에서의 튀김현상을 분석하기 위하여 소변의 발사각도 및 속도를 가장 실제와 유사한 조건으로 설정하고 이를 상용 전산 유체 역학 소프트웨어인 CFD- ACE+의 자유 표면 계산 기능과 두 가지 유체(액체 및 기체)의 혼합 계산 모델을 사용한 계산 결과와 비교 하였다. 그 결과 변기 표면의 표면장력을 아주 작게 설정한 경우(작은 접촉각, 친수성)에는 중력의 영향을 고려하였음에도 불구하고 소변이 변기에 충돌 후 상부로 상당부분 튀어 올라가는 결과를 얻었다. 여러 가지 각도와 발사 속도, 실제의 인체와 유사한 발사 부위의 형상 변화로 인한 유체 표면의 난류 발생과 이에 따른 변기 표면 충돌 현상 변화 등을 수치적으로 고찰하였다. 한 예로 5.6 mm 직경의 노즐에서 소변이 나오는 경우를 발사 속도 3 m/s, 각도 $10^{\circ}$로 주고 중력을 고려하여 10초 동안을 계산하면, 방뇨 시 toilet bowl 내부에서의 물의 유동과 toilet 표면을 맞고 튀기는 현상을 그림 1과 같이 볼 수 있었다.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.175-186
• /
• 2010

When a rigid post is exposed to traffic, it is hazardous not only to head-on impacts but also to side impacts. Clip-type slip base is an effective measure to reduce the severity of head-on impacts and side impacts as well because of its multi-directional release mechanism. Side impact tests were conducted and the results were analysed to demonstrate the hazardousness of a rigid post to a side impact and the crash worthiness of a post having clip-type slip base. For that, side impact test standard was made adapting the NCHRP Report 350, and 820kg-50km/h side impact tests were made for posts of D101.6mm(t=4.2mm) with and without slip base. Additionally, 35km/h side impact to the same post with slip base was conducted to check whether the clip-type slip base release mechanism works properly to the low impact speed. The tests revealed that the rigidly connected post was very hazardous to side impact while the post with the clip-type slip base reduced the impact severity tremendously.

• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.282-288
• /
• 2022

Facial masks have become indispensable in daily life to prevent infection and spread through respiratory droplets in the era of the corona pandemic. To understand how effective two different types of masks (i.e., KF-94 mask and dental mask) are in blocking respiratory droplets, i) we preferentially analyze wettability characteristics (e.g., contact angle and contact angle hysteresis) of filters consisting of each mask, and ii) subsequently observe the dynamic behaviors of microdroplets impacting at high velocities on the filter surfaces. Different wetting properties (i.e., hydrophobicity and hydrophilicity) are found to exhibit depending on the constituent materials and pore sizes of each filter. In addition, the pneumatic conditions for stably and uniformly dispensing microdroplets with a certain volume and impacting behaviors associated with the impacting velocity and filter type change are systematically explored. Three distinctive dynamics (i.e., no penetration, capture, and penetration) after droplet impacting are observed depending on the type of filter constituting the masks and droplet impact velocity. The present experimental results not only provide very useful information in designing of face masks for prevention of transmission of infectious respiratory diseases, but also are helpful for academic researches on droplet impacts on various porous surfaces.

• Journal of Korean Society of Transportation
• /
• v.20 no.2
• /
• pp.81-92
• /
• 2002

An automobile crash with a pedestrian generates a trajectory which is crucial to identify the cause of the crash. Previous researches have been carried out for pedestrian movement using simple explicit formulae. The formulae are derived from elementary physics. Therefore, they could not sufficiently include variables of a vehicle and a pedestrian. To overcome such a limitation, a simulation is utilized for the pedestrian behavior in crash environment. A dynamic software called MADYMO is utilized for the simulation. A simulation model is established. The automobile body and a dummy are modeled with rigid bodies, joints and springs. The simulation results are compared with those from explicit formulae. It is found that the explicit formulae did not fit to pedestrian conditions. Simulations are performed for various velocities of automobiles. Results are discussed for the usage of the simulation.