• Journal of ILASS-Korea
• /
• v.22 no.3
• /
• pp.129-136
• /
• 2017

Effects of collision angle on heat transfer characteristics of a liquid droplet impinging on a heated wall above the Leidenfrost point temperature were experimentally investigated. The heated wall and droplet temperatures were $506^{\circ}C$ and $100^{\circ}C$, respectively, and the impact angle varied from $20^{\circ}$ to $90^{\circ}$ while the normal collision velocity was constant at 0.27 m/s. The droplet collision behaviors and the surface temperature distribution were measured using synchronized high-speed video and infrared cameras. The major physical parameters influencing upon droplet-wall collision heat transfer, such as residence time, wall heat flux, effective heat transfer area, heat transfer amount, were analyzed. It was found at the constant normal collision velocity that the residence time, wall heat flux and effective heat transfer area were hardly not changed, resulting in the almost constant heat transfer amount.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.6
• /
• pp.63-71
• /
• 1998

In a diesel engine the phenomenon of spray impaction on a combustion chamber wall has been taken as an undesirable matter because of the deposition of fuel on the surfaces, and the subsequent slow evaporation and mixing with air resulting in unburned hydrocarbons. Therefore many researches have concentrated on avoiding fuel impaction on surfaces. On the contrary done a number of studies using spray wall impactions in a positive way, which makes the droplets smaller, changes the direction into free spaces far from the wall and also improves mixing with air. In this paper the angle variations of the impaction land sufrace prepared for the injection spray is analysed as a simulative manner. The spray dispersions, vapor distributions and flow fields are compared with impacting angle variation. The results show more angle give more vapor distribution until $15^{\circ}$.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.76-77
• /
• 2022

COLREGS의 규칙 17에는 피항선박만의 충돌회피동작으로 충돌을 피할 수 없을때 유지선박은 충돌을 피하기 위한 협력 행동을 취해야 한다고 명시되어 있다. 이 연구에서는 두 선박 간 충돌 시 각도별 거리(CDC)를 통해서 유지선박이 언제 충돌회피 협력 동작을 취해야 하는 시점을 제시하였다. 두 선박 간 충돌평가는 다양한 시나리오에 기반한 시뮬레이션을 통해 수행되었고, 시뮬레이션은 MMG 모델에 의해 설계되었다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1737_1738
• /
• 2009

미사일의 표적 충돌각을 원하는 각도로 제어하는 것은 표적의 취약점을 공략하기 위해 필수적인 기술이다. 표적 타격 지점 및 충돌각을 고려하지 않으면 타격에 성공하였다고 하더라도 표적의 방어 능력이 좋거나 신관이 충돌각에 민감하면 표적의 효과적인 파괴에 실패할 수도 있다. 이런 경우 유도 미사일의 종말 유도 효율을 증가시키기 위해 미사일이 표적을 타격하는 각도인 표적 충돌각(Impact Angle)을 제어할 수 있으면 적정 비행경로의 설정에 유리하고 우회공격 등이 가능할 뿐 아니라 미사일 탄두의 효과를 극대화할 수 있다. 하지만 이러한 장점을 갖는 표적 충돌각 유도 기법에 대한 연구는 아직 활발하게 행해지고 있지는 못하다. 기존 연구 결과들은 2차원 평면상에서의 충돌각 제어만을 다루고 있어, 요와 피치 채널의 커플링 문제가 있는 BTT 미사일에 적용하기가 어렵다는 문제점을 갖고 있다. 또한 미사일 동역학을 무시하거나 단순화하여 문제를 풀고 있기 때문에 실제 상황에 적용이 어렵다는 단점이 있다. 본 논문에서는 3차원 공간상에서의 롤 명령을 모두 포함하면서 동시에 미사일 자동조종제어기, 핀 구동기 동역학을 모두 고려한 새로운 BTT 미사일의 표적 충돌각 유도 기법을 제안한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.12
• /
• pp.829-838
• /
• 2022

This study conducts Hypervelocity Impact(HVI) simulations considering space objects with various shapes and different impact angles. A commercial nonlinear structural dynamics analysis code, LS-DYNA, is used for the present simulation study. The Smoothed Particle Hydrodynamic(SPH) method is applied to represent the impact phenomena with hypervelocity. Mie-Grüneisen Equation of State and Johnson-Cook material model are used to consider nonlinear structural behaviors of metallic materials. The space objects with various shapes are modeled as a sphere, cube, cylinder, and cone, respectively. The space structure is modeled as a thin plate(200 mm×200 mm×2 mm). HVI simulations are conducted when space objects with various shapes with 4.119 km/s collide with the space structures, and the impact phenomena such as a debris cloud are analyzed considering the space objects with various shapes having the same mass at the different impact angles of 0°, 30° and 45° between the space object and space structure. Although space objects have the same kinetic energy, different debris clouds are generated due to different shapes. In addition, it is investigated that the size of the debris cloud is decreased by impact angles.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.3
• /
• pp.179-186
• /
• 2016

A study is to research crash barriers for vehicles that prevent road breakaway of vehicles and protect car passengers and pedestrians as absorbing impulse. Protection performance tests on vehicle passengers were simulated by using a LS-DYNA program. Through repetitive simulation on various speed and angles, passenger protection performance according to different impact condition was contemplated. Variable setting for the simulation was calculated as the mean weight of domestic car sales. By analyzing NASS (National Automotive Sampling System) of NHTSA (National Highway Traffic Safety Administration) of the U.S., the actual speed and collision angle section of accidents were computed. As a result, we confirmed that THIV (Theoretical Head Impact Velocity) and PHD (Post-impact Head Deceleration) are increased according to the impact speed and angle. Also, when the vehicle hit the guardrail post, we could be confirmed that the passenger protection performance greatly decreased.

• Journal of Navigation and Port Research
• /
• v.38 no.4
• /
• pp.327-333
• /
• 2014

The Convention on the international regulations for preventing collisions at sea, 1972(COLREGs) defines the collision avoidance principles and various navigation rules for the prevention of collision at sea. In particular, the initial responses to avoid risk of collision are mainly decided by navigation officer's experience and subjective judgement. However, collision accidents could be effectively prevented if the minimum criteria of quantitative initial response are suggested to the junior officers and the cadets who have insufficient sea experience and navigation competency. This study reviewed the COLREGs terms related to the initial response and the existing papers concerned with risk assessment model. A questionnaire survey is also carried out for safe passing distance, degrees of alternating course and initial response distance to avoid collision in accordance with various encounter situations. Base on these results, we propose the proper minimum safe passing distance between the vessels, the initial response distance and required turning angles for alternation in each encounter situations. The suggested criteria of initial response will contribute to the prevention of collision at sea as well as the improvement of gradual navigation technology.

• Journal of Korean Society of Transportation
• /
• v.32 no.2
• /
• pp.106-118
• /
• 2014

The objective of this study is to develop a methodology for evaluating the effectiveness of in-vehicle pedestrian warning systems. Driving Simulator-based experiments were conducted to collect data to represent driver's responsive behavior. The braking frequency, lane change duration, and collision speed were used as measure of effectiveness (MOE) to evaluate the effectiveness. Collision speed data obtained from the simulation experiments were further used to predict pedestrian injury severity. Results demonstrated the effectiveness of warning information systems by reducing the pedestrian injury severity. It is expected that the proposed evaluation methodology and outcomes will be useful in developing various vehicular technologies and relevant policies to enhance pedestrian safety.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.9
• /
• pp.1021-1026
• /
• 2011

Structural impact problems are becoming increasingly important for a modern defense industry, high-speed transportation, and other applications because of the weight reduction with high strength. In this study, a numerical investigation on the impact fracture behavior of aluminum plates was performed under various projectile conditions such as nose shapes, velocities, and incidence angles. In order to reduce the iterative numerical analysis, the Latin Square Method was employed. The influence factor was then determined by an FE analysis according to the conditions. The results were evaluated by means of a statistical significance interpretation using variance assessment. It was shown that the velocity and incidence angle can be the most important influence factors representing the impact absorption energy and plastic deformation, respectively.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2008.04a
• /
• pp.355-358
• /
• 2008

미국, 일본 등 해외 선진국에서는 교통사고를 과학적으로 분석하기 위해서 많은 연구가 활발히 이루어지고 있다. 특히 교통사고가 발생하면 어느 차량이 가해차량 이고 피해 차량인지 판단하기가 매우 어려운 실정이다. 본 논문에서는 이러한 문제점을 해결하기 위해서. 교통사고 발생 전후 일정 시간 동안 진행차량의 주변 상황을 자동 녹화하고, 특히 충돌방향으로 카메라의 방향을 이동시켜서 충돌 시에 차체의 방향이 변경되더라도 그에 따라 카메라의 촬영 각도를 변경시켜 충돌전후의 상황을 정확하게 녹화할 수 있는 시스템을 제안하였다.