Journal of ILASS-Korea (한국분무공학회지)

Institute for Liquid Atomization and Spray Systems-Korea (한국분무공학회)
권호 표지
DOI QR코드

DOI QR Code

Experimental Study of Collision Angle Effects on Heat Transfer During Droplet-wall Collision in Film Boiling Regime

막비등 영역에서 액적-벽면 충돌 시 충돌각도가 열전달에 미치는 영향에 관한 실험적 연구

  • Received : 2017.04.28
  • Accepted : 2017.07.29
  • Published : 2017.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Effects of collision angle on heat transfer characteristics of a liquid droplet impinging on a heated wall above the Leidenfrost point temperature were experimentally investigated. The heated wall and droplet temperatures were $506^{\circ}C$ and $100^{\circ}C$, respectively, and the impact angle varied from $20^{\circ}$ to $90^{\circ}$ while the normal collision velocity was constant at 0.27 m/s. The droplet collision behaviors and the surface temperature distribution were measured using synchronized high-speed video and infrared cameras. The major physical parameters influencing upon droplet-wall collision heat transfer, such as residence time, wall heat flux, effective heat transfer area, heat transfer amount, were analyzed. It was found at the constant normal collision velocity that the residence time, wall heat flux and effective heat transfer area were hardly not changed, resulting in the almost constant heat transfer amount.

Keywords

References

  1. J. G. Leidenfrost, "A tract about some qualities of common water", Int. J. Heat Mass Transfer, 9, 1966, pp. 1153-1166. https://doi.org/10.1016/0017-9310(66)90111-6
  2. A. M. Bloch, M. Reyhanoglu and N. H. McClamroch, "Control and stabilization of nonharmonic dynamic system", IEEE Trans. Automatic Control, Vol. 37, No. 11, 1992, pp. 1746-1757. https://doi.org/10.1109/9.173144
  3. B. Biton, P. Ruyer, S. M. Nathalie and M. Gradeck, "Thermal hydraulic across a partially damaged core during the reflood phase of a LOCA", Nuclear engineering and design, Vol. 264, 2013, pp. 187-194. https://doi.org/10.1016/j.nucengdes.2013.02.026
  4. C. O. Pedersen, "An experimental study of the dynamic behavior and heat transfer characteristics of water droplets impinging upon a heated surface", Int. J. Heat Mass Transfer, Vol. 13, 1970, pp. 369-381. https://doi.org/10.1016/0017-9310(70)90113-4
  5. H. Fujimoto, H. Takuda and R. Doi, "An experimental study on the oblique collisions of water droplets with a smooth hot solid", Journal of Fluids Engineering, Vol. 134, 2012, 071301. https://doi.org/10.1115/1.4006926
  6. F. Lemoine, G. Castanet and T. Lienart, "Measurement of the temperature of droplets interacting with a heated wall", 14th Int. Symp. on applications of laser techniques to fluid mechanics, Lisbon, Portugal, 07-10, July, 2008.
  7. B. S. Kang and D. H. Lee, "On the dynamic behavior of a liquid droplet impacting upon an inclined heated surface", Experiments in Fluids, Vol. 29, 2000, pp. 380-387. https://doi.org/10.1007/s003489900104
  8. J. Yu, M. H. Shi and T. C. Bai, "Dynamic behavior and heat transfer of a liquid droplet impinging on a solid surface", Experimental Thermal and Fluid Science, Vol. 6, 1993, pp. 202-207. https://doi.org/10.1016/0894-1777(93)90030-M
  9. A. R. Pishevar and P. Pournaderi, "The effect of the surface inclination on the hydrodynamics and thermaldynamics of Leidenfrost droplets", Journal of Mechanics, Vol. 30, No. 2, 2014, pp. 145-151. https://doi.org/10.1017/jmech.2014.11
  10. A. Mariani, G. P. Celata, G. Zummo and M. Cumo, "Visualization of the impact of water drops on a hot surface: effect of drop velocity and surface inclination", Heat Mass Transfer, Vol. 42, 2006, pp. 885-890. https://doi.org/10.1007/s00231-006-0139-1
  11. H. Kim and J. Park, "Effects of Droplet Temperature on Heat Transfer During Collision on a Heated Wall Above the Leidenfrost Temperature", Journal of ILASS-Korea, Vol. 21, No. 2, 2016, pp. 78-87. https://doi.org/10.15435/JILASSKR.2016.21.2.78
  12. H. Kim and J. Park, "An experimental investigation on dynamics and heat transfer associated with a single droplet impacting on a hot surface above the Leidenfrost point temperature", Kerntechnik, Vol. 81, No. 3, 2016, pp. 1-11. https://doi.org/10.3139/124.016012
  13. K. Kim, H. Kim, J. Park and S. Bae, "The effect of impact velocity on Droplet-wall collision heat transfer above the Leidenfrost point temperature", Trans. Korean Soc. Mech. Eng. B, Vol. 39, No. 7, 2015, pp. 567-578. https://doi.org/10.3795/KSME-B.2015.39.7.567
  14. K. Mishima and Y. Guo, "A non-equilibrium mechanistic heat transfer model for post dryout dispersed flow regime", Experimental Thermal and Fluid Science, Vol. 23, 2002, pp. 861-869.
  15. T. Ueda, T. Enomoto and M. Kanetsuki, "Heat Transfer Characteristics and Dynamic Behavior of Saturated Droplets Impinging on a Heated Vertical Surface", Bulletin of the Japan Soc. Mech. Eng., Vol. 22, No. 167, 1979, pp. 724-732. https://doi.org/10.1299/jsme1958.22.724
  16. A. E. Biance, C. Clanet, D. Quere, F. Chevy and G. Lagubeau, "On the elasticity of an inertial liquid shock", J. Fluid Mech., Vol. 554, 2006, pp. 47-66. https://doi.org/10.1017/S0022112006009189
  17. A. H. Elmahdy and K. Haddad, "Experimental procedure and uncertainty analysis of a guarded hotbox method to determine the thermal transmission coefficient of skylight and sloped glazing", NRCC-43378, 2000.
  18. K. Watanabe, "The international association for the properties of water and steam", IAPWS AN1-03 reports.
  19. A. Prub and W. Wagner, "The IAPWS Formulation 1995 for the Thermodynamic Properties of Ordinary Water Substance for General and Scientific Use", J. Phys. Chem. Ref. Data, Vol. 31, No. 2, 2002, pp. 387-535. https://doi.org/10.1063/1.1461829
  20. E. R. Dobrovinskaya, L. A. Lytvynov and V. Pishchik, "Sapphire: materials, manufacturing, applications, Springer", Springer, ISBN 978-0-387-85694-0, 2009.
  21. F. Lelong, G. Castanet, M. Gradeck, N. Seiler, P. Dunand and P. Ruyer, "Behaviour of liquid droplets bouncing onto a hot slab", 23rd Annular conference on liquid atomization and spray systems, Brno, Czech Republic, september, 2010.
  22. A. Mittal and S. Bhardwaj, "A survey on various edge detector techniques", Proccedia Technology, Vol. 4, 2012, pp. 220-226. https://doi.org/10.1016/j.protcy.2012.05.033