• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1479-1482
• /
• 2003

The shock absorber is a part having a direct influence on the ride comfort, stability and dynamic load prediction of a vehicle. Thus, a rationally modeled shock absorber should be required in the dynamic analysis of vehicles. This thesis presents a modified model, based on Worden's hyperbolic tangent function, in order to fit experimental data on the velocity-damping force of a shock absorber. The hyperbolic tangent function correctly indicates the characteristics of a shock absorber. and has the advantage of containing physical causality. To evaluate the method, comparative evaluations of the linear model. the 5th polynomial model and Worden's model were carried out. The function presented in this paper is not only simple but also makes it possible to estimate the function coefficients easily and visually. In addition, it has the advantage of containing physical causality. Lastly, it effectively models the damping force of a shock absorber.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.10
• /
• pp.44-49
• /
• 1997

The damping force is determined by four valves and the components which consist of the shock absorber for vehicle. In this study it is investigated the individual effects of four valves and these components on damping forces using dynamic behaviour analysis program of the shock absorber. In addition, opening of main valves are researched during compression and tension cycle due to up- down reciprocation movement of piston. We are to strictly control the properties and tolerance of componenets having important effects on the damping force. Thus we are intended to produce shock absorber of better quality.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05b
• /
• pp.15-18
• /
• 2004

피뢰기에 뇌 또는 이상전압과 같은 정격이상의 고장전류가 유입되어 발생하게 되는 순간적인 열 충격과 내부압력 상승은 폭탄이 내부에서 터지는 것과 같은 엄청난 양의 충격에너지이다. 본 연구에 있어서 폴리머 피뢰기의 제조에 사용된 모듈용 브레이드 복합재료는 압력해소 및 폭발 비산하지 않도록 하는 기능을 수행하도록 설계되어있다. 기존의 폴리머 피뢰기에 적용된 복합재료보다 충격에너지를 흡수하는 구조물에 유리한 브레이드 복합재료를 피뢰기 모듈의 제조에 도입한 것은 매우 의미 있는 일이라 판단된다. 따라서 본 연구에서는 열경화성 브레이드 복합재료를 제조하기 위하여 프리폼을 먼저 제작한 다음 금형에 삽입한 후 진공상태에서 수지를 주입하여 경화시키는 RTM공법을 이용하였다. 본 연구의 목적은 브레이드 패턴 및 방압개소 설계 등의 기초적인 자료조사 및 실험을 통하여 폴리머 피뢰기의 폭발 비산을 방지할 수 있는 압력해소 성능을 위한 기초 자료를 확보하고자 하는 것이다. 브레이드 복합재료의 기본적인 경화거동을 등온 및 동적 DSC를 이용하여 고찰하였고, 기본적인 전기적 특성을 평가하였으며, 방압개소를 가진 폴리머 피뢰기 모듈의 고장전류시험시 예상되는 열 충격에 대한 성능을 검증하기 위하여 열팽창계수를 측정하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5D
• /
• pp.689-695
• /
• 2011

In this paper, available power generation on the road from renewable energy technologies on how to use the piezoelectric effect has been studied. A lot of vehicles on road that can generate electricity using renewable energy technology as part of the external shock to convert the load into electrical energy using piezoelectric effect piezoelectric generator can be applied to road space. Piezoelectric power harvesting using piezoelectric ceramics for the development of impact load characteristics were tested as function of various experimental design such as generator design and array of piezo-ceramic. To design the piezoelectric generator, the characteristics of piezoelectric ceremic were compared depending on the type of impact load as function of impact load, shock-absorbing.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.7
• /
• pp.612-618
• /
• 2007

The dynamic behaviors of a KT-1 family aircraft nose landing gear have been analyzed and the optimal design of an aircraft shock absorber has been conducted to improve efficiency of shock energy absorption. The nose landing gear is modeled as a 2 DOF system using ADAMS and various operational and environmental landing conditions were considered. The results of dynamic simulation for various landing conditions agree well with experiments. Also the effect of parameters of a shock strut on the dynamic behaviors and on shock energy absorption of the nose landing gear has been evaluated for optimal design to define design variables. It has been found that the parameters of a shock strut such as oil-density and orifice area have more effects on dynamic behaviors than those of operation conditions. Optimal design is performed to maximize the efficiency of shock energy absorption using Feasible Direction Method. As a result the design values of the shock strut for maximum efficiency of shock energy absorption are derived and it turns out that efficiency and dynamic behaviors of the nose landing gear were improved by the optimal design.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.2
• /
• pp.101-108
• /
• 2004

Recently, a semi-active shock absorber has been taking interest because of its low cost and simple structure than the active one. CFD analysis has been conducted to investigate the continuous and variable damping characteristics of the semi-active shock absorber. Also, the flow resistance characteristics of a spool valve has been examined to identify individual parameters(namely, exponent and discharge coefficient) of pressure-flow rate relation needed for the accurate valve modeling. The flow field in the damping valve was simulated using the commercial code, CFX-5.3. The numerical results showed reasonable agreement with the experimental outputs. The pressure distribution with the variation of spool opening length and volume flow rate were discussed in detail. And the continuous and variable damping performance was found clearly. The individual parameters of spool valve were obtained as a function of orifice area. The exponent and discharge coefficient were fitted in with the first and the third polynomial respectively.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.791-794
• /
• 2002

On this study, the dynamic response of vibration absorber was operated by finite element analysis and this paper proposed the optimum value of spring constant and damping coefficient for three types of impact absorber. Also the reaction farce of piston which is the objective function was proposed by the optimum design and the model which has the optimum value among the reaction forces was shown.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.1
• /
• pp.187-195
• /
• 2003

The performance of shock absorber is directly related to the car behaviour and performance, both for handling and ride comfort. The displacement sensitive shock absorber has two modes of damping force (i.e. soft and hard) according to the position of piston. In this study, a mathematical nonlinear dynamic model is introduced to predict the performance of displacement sensitive shock absorber. Especially in this paper, the transient zone is considered and the simulation result is well fit with experimental data. And the vehicle dynamic characteristic of displacement sensitive shock absorber is presented using quarter car simulation model. The simulation results of frequency response are compared with passive shock absorber.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.5
• /
• pp.156-162
• /
• 2003

The shock absorber is a part having a direct influence on the ride comfort, stability and dynamic load prediction of a vehicle. Thus, a rationally modeled shock absorber should be required in the dynamic analysis of vehicles. This thesis presents a modified model, based on Worden's hyperbolic tangent function, in order to fit experimental data on the velocity-damping force of a shock absorber. The hyperbolic tangent function correctly indicates the characteristics of a shock absorber, and has the advantage of containing physical causality. To evaluate the method, comparative evaluations of the linear model, the 5th polynomial model and Worden's model were carried out. The function presented in this paper is not only simple but also makes it possible to estimate the function coefficients easily and visually. In addition, it has the advantage of containing physical causality. Lastly, it effectively models the damping force of a shock absorber.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.85-90
• /
• 1997

In the stroke sensitive shock absorber, the oil path is formed along the internal cylinder surface to make the eli flow during piston's upper-lower reciprocation movement. With constraint to the conventional shock absorbers which show one dynamic characteristic curve, stroke sensitive shock absorber shows two kins of dynamic characteristic according to the stroke, In the study, analysis on the damping force generation process and dynamic behaviour characteristics of stroke sensitive shock absorber is performed, the valve characteristics being considered more precise information about design and damping performance analysis.