• 대한조선학회논문집
• /
• 제49권1호
• /
• pp.60-67
• /
• 2012

This study considers the numerical analysis on parametric roll for container ships. As a method of numerical simulation, an impulse-response-function approach is applied in time domain. A systematic study is carried out for the parametric roll of two container ships, particularly observing the sensitivity of computational results to some parameters which can affect the analysis of parametric roll. The parameters to be considered are metacentric height (GM), simulation time window, and the discretization of wave spectrum. Based on the result of parametric roll simulation, numerical sensitivity and uncertainty in computational analysis are discussed.

• 한국자동차공학회논문집
• /
• 제11권6호
• /
• pp.171-182
• /
• 2003

Tire vibration modes are known to play a key role in vehicle ride and comfort characteristics. Inputs to the tire such as impacts, rough road surface, tire nonuniformities, and tread patterns can potentially excite tire vibration. In this study, experimental modal analysis on the tire in ground contact are performed by a 3-D impact at the center of contact patch to investigate which modes of tire influence the vibration of wheel and axle. Through the experiment, the vibration transmission properties from tire to axle are examined. And we have compared the influential tire modes when the tire is excited by a vertical impact with those when excited by the 3-D impact. Additionally, the modes of ground contact tire are compared with those of the suspended tire.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.317-322
• /
• 2002

There are many researches to identify the rigid body properties from the mass-line obtained by impact hammer testing. The correct rigid body properties of the structure may be estimated if the mass-line of the structure could be obtained exactly. When the structure is mounted by elastic materials, the mass-line cannot be read correctly from the impulse response spectrum. The reason is due to the effects of rigid body modes of mounted structure. In this paper, the effects of rigid body modes of mounted structure to the mass-line are discussed and the method to remove these effects is also presented.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.336.2-336
• /
• 2002

There are many researches to identify the rigid body properties from the mass-line obtained by impact hammer testing. The correct rigid body properties of the structure may be estimated if the mass-line of the structure could be obtained exactly. When the structure is mounted by elastic materials, the mass-line cannot be read correctly from the impulse response spectrum. The reason is due to the effects of rigid body modes of mounted structure. (omitted)

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.416-421
• /
• 2001

It was firstly issued that frequently broken of Encoder installed at travelling motor during RTGC operation. Estimated as broken due to excessive vibration of traveling and motor manufacturer claimed it as resonance of motor base. The principal vibration of Encoder was caused by the rotating vibration component of motor and by traveling wheel. The component transmitted from the wheel didn't have great vibration by the resonance with motor and other parts. Therefore, the plans was tried to add the support point to prevent the Encoder shaft vibrated greatly and inhibit the vibration. These showed good results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.737-741
• /
• 2000

Portable communication devices such as laptop computers suffer impact-induced failure in their usage. Drop/impact performance of these products is one of important concerns of product design. Because of the small size of this kind of electronics products, it is very expensive, time-consuming and difficult to conduct drop tests to directly detect the failure mechanism and identify their drop behaviors. Finite element analysis provides a vital, powerful vehicle to solve the problems. The models are created with HYPERMESH, and the analysis is carried out with LS-DYNA3D. The analysis is focused on HDD impact behavior in acceleration peak values.

• 한국강구조학회 논문집
• /
• 제24권4호
• /
• pp.399-410
• /
• 2012

본 연구에서는 실험적 모드해석 기법을 이용하여 캔틸레버 및 양단고정 직사각형 적층복합판의 동적 테스트가 수행되었다. 균열 성장으로 인한 손상평가를 위하여 적층복합판에 인위적인 단계별 손상(균열)을 가하였으며, 충격해머 모드실험에 의해 얻어진 주파수응답함수(FRF), MAC(Modal Assurance Criterion) 값 및 모드매개변수(진동수, 모드형상, 감쇠비)의 변화를 분석하였다. 각 단계별 손상에 대한 적층복합판의 실험적 모드매개변수를 검증하기 위하여 유한요소해석으로부터 구한 고유진동수와 모드형상을 비교하였다. 손상은 벤치마크로서의 유한요소모델을 보정하는 과정으로부터 얻게 되는 적층복합판의 기하학적 특성 및 구조적 거동의 변화를 통하여 평가될 수 있음을 보여주었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권1호
• /
• pp.48-55
• /
• 2018

본 연구의 목적은 구조 시스템의 구조적 손상에 의한 고유주파수 감소율과 감쇠변수 증가율을 비교 분석하는 것이다. 이를 위하여 저주파 영역의 고유주파수와 비교적 높은 감쇠변수 특성을 갖는 2경간 H-Beam을 대상으로 실내실험과 수치해석을 수행하였으며, 충격하중에 대한 손상 전과 손상 후 응답신호를 각각 14개 위치에서 분석하였다. 각 위치에 대한 손상 전과 손상 후 응답신호는 푸리에 변환을 통하여 고유주파수 감소율을 분석하였으며, 감쇠변수 증가율은 웨이블릿 변환을 통하여 수행되었다. 웨이블릿 변환은 최대 웨이블릿 계수에 대응되는 스케일의 시간함수 분리가 가능하기 때문에 감쇠변수 평가에 대한 정확성을 높일 수 있다. 손상 전과 손상 후 계측된 응답신호에 대하여 고유주파수 감소율은 민감하지 못한 결과로 평가되었고, 감쇠변수 증가율은 비교적 큰 변화량을 보여 구조 시스템의 손상도 평가에 신뢰할 수 있는 결과를 보여주었다.

• 대한조선학회논문집
• /
• 제38권4호
• /
• pp.39-47
• /
• 2001

본 논문에서는 매트형 거대 부유식 구조물의 동적 응답을 모드중첩법을 이용하여 시간영역에서 해석하였다. 동유체력의 시간기억함수는 고차경계요소법으로 계산한 동유체감쇠력을 푸리에변환하여 구하였으며, 구조물의 동적 응답은 해석적으로 유도한 고유 모드를 시간적분하여 산정하였다. 해석법을 검증하기 위하여 집중하중이 순간적으로 제거되는 경우, 집중하중이 충격적으로 가해지는 경우, 그리고 집중하중이 등속으로 일정거리를 움직인 경우 등 3가지에 대하여 계산을 수행하였다. 이렇게 얻은 수치결과는 3가지 경우 모두 모형에 대한 실험치와 잘 일치하였다.

• 대한조선학회논문집
• /
• 제47권3호
• /
• pp.291-305
• /
• 2010

A three-dimensional time-domain calculation method is of crucial importance in prediction of the motions and wave loads of a ship advancing in a severe irregular sea. The exact solution of the free surface wave-ship interaction problem is very complicated because of the essentially nonlinear boundary conditions. In this paper, an approximate body nonlinear approach based on the three-dimensional time-domain forward-speed free-surface Green function has been presented. The Froude-Krylov force and the hydrostatic restoring force are calculated over the instantaneous wetted surface of the ship while the forces due to the radiation and scattering potentials over the mean wetted surface. The time-domain radiation and scattering potentials have been obtained from a time invariant kernel of integral equations for the potentials which are discretized according to the second-order boundary element method (Hong and Hong 2008). The diffraction impulse-response functions of the Wigley seakeeping model advancing in transient head waves at various Froude numbers have been presented. A simulation of coupled heave-pitch motion of a long rectangular barge advancing in regular head waves of large amplitude has been carried out. Comparisons between the linear and the approximate body nonlinear numerical results of motions and wave loads of the barge at a nonzero Froude number have been made.