• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.6
• /
• pp.794-805
• /
• 1999

Pneumatic cushioning cylinders are commonly employed for vibration and shock control. A mathematical simulation model of a double acting pneumatic cushioning cylinder designed to absorb shock loads is presented which is based on the following assumptions; ideal equation of state isentropic flow through a port conservation of mass polytropic thermodynamics single degree of freedom piston dynamics and energy equivalent linear damping. These differential equation can be solved through numerical integration using the fourth order Runge-Kutta method. An experimental study was conducted to validate the results obtained by the numerical integra-tion technique. Simulated results show good agreement with experimental data. The computer simulation model presented here has been extremely useful not only in understanding the has been extremely useful not only in understanding the basic cushioning but also in evaluating different designs.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.189-194
• /
• 2004

As a disk drive becomes widely used in portable environments, one of the important requirements is durability under severe environmental condition, especially, resistance to mechanical shock. An important challenge in the disk recording is to improve disk drive robustness in shock environments. If the system comes In contact with outer shock disturbance, the system gets critical damage in head-gimbal assembly or disk. This paper describes analysis of a HGA(head-gimbal assembly) in micro MO drives to shock loading during both non-operating state and operating state. A finite element model which consists of the disk, suspension, slider and air bearing was used to find structural response of micro MO drives. In the operational case. the air bearing is approximated with four linear elastic springs. The commercially available finite element solver, ANSYS/LS-DYNA, is used to simulate the shock response of the HGA in micro MO drives. In this paper, the mechanical robustness of the suspension is simuiated considering the shock responses of the HGA.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.912-921
• /
• 2009

Pulse-discharge technology (PDT) is an innovative technology which uses enormous energy developed by electric discharge for a very instant moment of time. Lately, it has been applied to make expanded sections at the ends of piles and anchors. The expanded section is formed by the deformation of bore-hole induced by shockwave energy developed in filling material by the pulse discharge. In this study, considering the phenomenon of pulse-discharge as an underwater explosion, finite element analyses were carried out to model the shockwave development by pulse discharge. The simulation technique was verified by comparing results with underwater discharge test results.

• Environmental and Resource Economics Review
• /
• v.6 no.1
• /
• pp.23-43
• /
• 1996

이산화탄소의 대기 중 배출규제에 대한 논의가 지구적으로 진행되고 있다. 본 연구에서는 탄소세의 도입이 우리나라의 전력부문에 미치는 효과를 분석하였다. 이를 위해 전력수요와 공급을 연계하는 계량경제학적 "시뮬레이션"모형을 수립하였다. 모형의 운용 결과, 탄소세의 부과는 특히 전력가격 상승에 큰 효과를 주고 있는 반면 전력수요의 변화에는 비교적 적은 영향을 미치는 것으로 분석되었다. 본 연구에서는 외생적 시나리오 설정에 의하여 탄소세 부과시 연료원 간의 대체효과를 분석하였는데 원자력이 화석연료를 대체하는 시나리오는 전력가격의 안정화에 약간의 도움을 주고 있으나 LNG가 유연탄 화력을 대체하는 시나리오는 전력가격의 변화에 거의 영향을 주지 않고 있다. 이러한 분석 결과는 발전 연료간의 대체를 고려한다고 하더라고 탄소세 충격의 완화에 미치는 효과는 미미하다는 것을 의미한다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1934-1-1935-1
• /
• 2007

산업이 발달하면서 산업 전반에 걸쳐 전기에 대한 의존도가 높아짐에 따라, 안정적인 전력의 공급이 점점 더 중요해지고 있다. 이러한 요구에 맞춰 안정적이고 질적으로 우수한 전력공급은 필수적이며, 현재 우리나라도 전력의 품질을 높이기 위해서 더욱 노력하고 있는 실정이다. 그중 변압기의 여자돌입 현상이 전기품질에 영향을 주며, 상황에 따라서 기기에 충격을 줄 수 있고, 기기의 고장을 불러일으킬 가능성도 있다. 이러한 문제를 줄이는데 도움이 되고자, 본 논문에서는 변압기의 여자돌입 현상을 분석하였다. 여자돌입을 분석하기 위해서 EMTP 시뮬레이션 프로그램을 사용하였으며, 변압기의 여자돌입 전류의 파형 등을 관찰 및 분석하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.112-112
• /
• 2010

최근 세라믹스의 고온소결과정 없이 상온 후막제조가 가능한 에어로졸 데포지션법이 개발되어 이를 응용한 다양한 연구들이 진행되고 있다. 본 연구에서는 차세대 3차원 초고밀도 집적용연성(flexible)기판재료로서 $Al_2O_3$-PTFE(polytetrafluoroethylene) 복합체를 에어로졸 데포지션을 이용하여 상온제조 하였으며, 제조된 복합체 내의 $Al_2O_3$ 함량계산에 관한 연구를 진행하였다. 제조된 복합체는 기존의 세라믹만의 $Al_2O_3$ 후막에 비하여 PTFE의 첨가로 인한 잔류응력 감소효과가 있음이 확인되었으며 SEM, TEM 등 미세구조 분석을 통하여 충격고화 시 파우더의 미립화감소를 확인할 수 있었다. 또한, 공정의 최적화를 위한 분석 시 중요한 요소인 복합체 내의 세라믹 함량을 간편한 전기적 특성 측정을 통하여 계산하는 방법에 대한 연구를 진행하였다. 이를 위하여 이종 물질의 혼합에 관한 이론인 Hashin-Shtrikman bound theory와 3차원 정전장 해석 시뮬레이션을 병행하여 계산의 오차범위를 산출하고 실제 제조된 복합체 내의 $Al_2O_3$ 함량을 5 vol.% 이내의 오차로 측정할 수 있었다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.3
• /
• pp.223-228
• /
• 2010

The mount which is used in military airplane should be operated in various situations such as vibration, shock and temperature. The recent mounts cost a lot and take much time to replace when they broke down. That's why new mount was produced in domestic by reverse engineering and the product has been proved its performance through environment test regarding vibration and shock. According to simulation of dynamic characteristics on vibration and shock, the result turns out to be similar to the result of the environmental test with an error of within 10 percent. As a result this research, a draft of the military aviation mount designing program is arranged.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.929-935
• /
• 2013

This paper presents the results of sizing optimization of ahat-shaped stiffener on a rectangular stiffened panel. The stiffened panel is subjected to impact loading by a projectile with a velocity of 1500-2500 m/s. To determine the size of the hat-shaped stiffener, sizing optimization was performed. The sizing optimization consists of three functions: objective, constraint, and design functions. The objective function is used to maximize the fundamental frequency of the stiffened panel. The constraint function is that the stiffener volume is less than 10% of the plate volume. The design function is the dimensions of the hat-shaped stiffener. By using the stiffened panel with the optimized hat-shaped stiffener, a hypervelocity impact was simulated, and the velocity and kinetic energy on the optimized stiffener was obtained. To evaluate the impact reduction on the stiffened panel, the velocity and kinetic energy of the projectile was normalized and compared.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.1
• /
• pp.71-78
• /
• 2015

The reliable sloshing assessment methods for LNG CCS(cargo containment system) are important to satisfy the structural strength of the systems. Multiphase fluid flow of LNG and Gas Compressibility may have a large effect on excited pressures and structural response. Impinging jet model has been introduced to simulate the impact of the LNG sloshing and analyze structural response of LNG CCS as a practical FSI(fluid structure interaction) method. The practical method based on fluid structure interaction analysis is employed in order to evaluate the structural strength in actual scale for Mark III CCS. The numerical model is based on an Euler model that employs the CVFEM(control volume based finite element method). It includes the particle motion of gas to simulate not only the interphase interaction between LNG liquid and gas and the impact load on the LNG insulation box. The analysis results by proposed method are evaluated and discussed for an effectiveness of FSI analysis method.

• Journal of Korean Society of Transportation
• /
• v.29 no.4
• /
• pp.7-15
• /
• 2011

Emerged in early 1990s, so called 'Quick service' industry that provides faster delivery of small parcels than regular mail service accelerated use of motorcycles. As the economic grows, use of large bicycles (more than 250CC displacement) for leisure purpose has also rapidly increased. Traffic crash data clearly shows the increasing trend in motorcycle crashes. The ratio of motorcycle involved crashes out of total has increased from 5.7% in 2005 to 8.3% in 2008, and similar trend can be found in fatalities ratio as well. In this study, we assess the level of risk when motorcycles operate on motorways by analyzing traffic rule violation ratio, lane change behaviour, driving speed behaviors of motorcycles in Uninterrupted Traffic Flow Facilities and using PC-CRASH simulation we also calculate car shock impulses occurred when an accident happens. Analysis result shows that the motorcycle is different from the car in terms of lane change timing and average speed, and also shows motorcycle drivers tends to conduct more improper driving behavior particularly when traffic is congested. The results from this study could be usefully applied when the law enforcement agent decides whether bicycles shall be allowed to use motorways. The result could be also utilized as fundamental information for further study of bicycles' driving behavior.