• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.723-734
• /
• 1991

본 연구에서는 투사체의 충격으로 인해 복합재에 발생하는 손상을 해석하기 위해 우선 이와 관련이 있는 손상에너지를 구할 수 있도록 동적 유한요소 프로그램을 개발하는데 있으며, 이렇게 구한 결과들을 Husman의 실험결과와 비교함으로써 본 논문 의 유한요소 프로그램이 적층복합보에 충격으로 인하여 전달되는 총에너지와 손상에너 지를 구하는데 타당한 것인가를 검토하고 이 프로그램을 이용하여 다음과 같은 것들을 해석하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.04a
• /
• pp.29-29
• /
• 1999

낙하추 방식의 저에너지 충격시험기는 일정한 질량을 가진 충격체를 금속재/복합재 구조재에 낙하시켜 줌으로써 인위적인 충격에너지를 금속재/복합재 구조재에 가하여 주는 장치로서 금속재/복합재 구조재의 충격으로 인한 손상 거동과 충격특성을 평가하기 위한 용도로 널리 활용되고 있다.

• Korean Journal of Materials Research
• /
• v.2 no.5
• /
• pp.366-374
• /
• 1992

Mechanical and impact properties of stitched S2 glass fiber reinforced polyester woven laminates composites have been studied. Laminates were stitched using Kevlar 49 thread with 1/2, 1, and 2 inch stitch spacing. Tensile and 3-point bending tests haute been performed to evaluate the mechanical properties of stitched and unstitched laminates. Impact tests at applied energy of 234.7J were performed to examine the impact behavior and toughness changes of the specimen. The same specimens were also tested repeatedly at low impact energy level of 110.2J for 3 times to evaluate damage tolerance properties. The tensile and 3-point bending test results showed that one inch spacing specimen had the highest tensile and flexural strength. It also showed the highest energy absorption capability and the best damage tolerance property at the repeated impact test. The half inch spacing specimen showed the lowest tensile strength and energy absorption property at the impact energy level of 234.7J, even though it had the highest frequency of stitching thread.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3148-3154
• /
• 2010

This paper presents the probabilistic analysis for fatigue life of Glass/Epoxy laminates with impact-induced damage. For this, a series of impact tests were perfomed on the Glass/Epoxy laminates using instrumented impact testing machine. Then, tensile and fatigue tests carried out so as to generate post-impact residual strength and fatigue life. Two Parameter Weibull distribution was used to fit the residual strength and fatigue life data of Glass/Epoxy composite laminates. The residual strength was affected by impact energy and their variance decreased with increasing of impact energy. The fatigue life of impacted laminates was greatly reduced by impact energy and this trend depended on applied stress amplitude. Additionally, the variation of fatigue life was gradually decreased with the applied stress amplitude.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.04a
• /
• pp.24-24
• /
• 2000

작업 중 공구를 관에 떨어뜨리거나 작업하기 위해 관을 이동하던 중 다른 물체에 부딪힐 경우 복합재로 만들어진 관이 손상을 입게 되는 경우가 생기는데 관이 상황에 따라 얼마나 손상을 입었는지가 본 연구의 관심이다. 충격자는 직경이 25.4mm와 12.7mm인 반구형 2종류와 모서리의 직경이 15mm인 원추형 1종류로 각각 무게가 다르며, 떨어뜨리는 자유낙하 높이는 120mm에서 700mm로 종류에 따라 간격을 달리했다. 실험 장치로는 Dynatup 8250을 사용했으며 충격에너지, 최대충격하중, 충격변위, contact diameter를 측정했다. 시험 후 시편은 방사선 촬영을 하여 충격자의 종류에 따라 손상의 정도가 어떻게 다른지를 파악했다. 직경이 25.4mm인 반구형의 충격자는 표면의 손상은 적었으나 복합재 관의 내부에 delamination이 많이 생겼으며 직경이 12.7mm인 반구형의 충격자는 표면의 손상이 심했으나 내부의 delamination이 상대적으로 적었다. Contact diameter와 최대충격하중과의 관계는 실험치와 이론치가 잘 일치했으나 Kinetic energy와 최대충격하중과의 관계는 실험치와 이론치의 차이가 있었다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.2
• /
• pp.31-38
• /
• 2000

Pressure vessels by composite materials were damaged sometimes during manufacturing or assembling. The state and the size of damage by low-velocity tests were investigated in this paper. Impactors of various masses and various tup shapes were dropped freely in the range of 120mm height to 700mm height. Compared with hemispherical tup of 12.7mm diameter, for hemispherical tup of 25.4mm diameter the size of surface dent was smaller but the size of delamination was bigger.

• Composites Research
• /
• v.15 no.5
• /
• pp.7-13
• /
• 2002

The piezoelectric thin film sensor has good characteristics to observe the impact responses of composite structures. The capabilities for monitoring impact behavior of Gr/Ep laminates subjected to damage-induced impact using the PVDF(polyvinylidene fluoride) film sensor were examined. For a series of low-velocity impact tests from low energy to damage-induced energy, simulated sensor signals were compared with measured signals and the PVDF film sensor. Local impact damages(matrix cracking and delamination) were found at three impact tests, but the measured signals agreed well with the simulated sensor signals based on the linear relationship between the impact forces and the PVDF film sensor signals. And the inverse technique was applied to reconstruct the impact forces using the PVDF film sensor signals. Most of reconstructed impact forces had good agreement with the measured forces. The comparison results showed that the local damage due. to low-velocity impact didn't disturb the global impact responses of composite laminates and the reconstruction of impact forces from PVDF sensor signals wasn't affected by the local damage.

• Composites Research
• /
• v.13 no.6
• /
• pp.30-38
• /
• 2000

In this paper, a system of falling weight impact tester was built up to evaluate the impact energy absorbing characteristics and impact strength of CFRP laminate plates in consideration of stress wave propagation theory. Delamination area of impacted specimens for the different ply orientation was measured with ultrasonic C-scanner to find correlation between impact energy and delamination area. Absorbed energy of quasi-isotropic specimen having four interfaces was higher than that of orthotropic laminates with two interfaces. The more interfaces, the more absorbed energy. Hybrid specimen containing GFRP layer was higher than that of normal specimens.

• Journal of the Korean Society for Railway
• /
• v.15 no.2
• /
• pp.109-115
• /
• 2012

In order to evaluate the effect of structural degradation of a GFRP composite bogie frame due to ballast-flying phenomena, the impact test and residual compression test after impact was conducted for glass fiber/epoxy 4-harness satin woven laminate composites applied to skin part of a bogie frame. The impact test was performed using a instrumented impact testing system with energy levels of 5J, 10J, and 20J, and the impactor was designed to have various ballast shapes such as sphere, cube, and cone to consider the ballasted track environments. The residual compression strength was tested to evaluate the degradation of mechanical properties of impact-damaged laminate composites. The results showed that the damage area and the degradation of residual compressive strength after impact for laminate composites was increased with increase of impact energy for all ballast shapes, and was particularly most influenced by ballast shape of cone.

• Composites Research
• /
• v.16 no.2
• /
• pp.9-17
• /
• 2003

We have implemented a system of falling weight impact tester in order to evaluate the impact energy absorbing characteristics and impact strength of CFRP laminate plates. The absorbed energy of T-300 orthotropic composites is higher than that of quasi-isotropic specimen over impact energy 7J, but in case of using T700 fiber, much difference does not show. Also, absorbed energy of T-300 orthotropic composites, which are composed of the same stacking number and orientation became more than that of T700 fiber specimen however there was no big difference in case of quasi-isotropic specimens. Delamination area of impacted specimens was measured with ultrasonic C-scanner to find correlation between impact energy and delamination area. Delamination area and frequency responses were evaluated between impacted and unimpacted specimens. There is a strong correlation between frequency responses and impact-induced delamination. The presence and scale of damages have been investigated based on the variations of frequency responses.