• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.481-488
• /
• 1988

In the analysis of impulsive response of plate, Lagrange's theory, Reissner's theory and Mindlin's theory are generally used. But, in applying these theories the impulsive stresses directly underneath the concentrated impact point cannot be analyzed because the solution fails to converge. In this paper, therefore, an attempt for a supported square plate is made by using three-dimensional dynamic theory of elasticity on the supposition that the uniform distributed load acts on the central part of it. In order to clarify the validity of theoretical analysis, the strain variations are measured experimentally for a square glass plate. Finally it is shown that these theoretical results are in close agreement with the experimental results.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.440-444
• /
• 2017

Two-dimensional hydrodynamic analysis was performed to analyze the attenuating characteristics of shock waves generated by the detonation of the bulkhead initiator. Through the interlocking analysis between HNS and HMX stacking initiator and STS bulkhead, we have precisely simulated detonation growth and pressure wave attenuation phenomena. The free surface velocity at the surface of the bulkhead was measured for quantitative comparison with the test data by VISAR. As a result, it was confirmed that the pressure attenuating pattern of the shock wave exponentially decreased according to the bulkhead thickness. The observed inflection point at the particle velocity measured over time is due to the subsequent propagation of the shock wave due to the rapid spallation of the interface between the detonator and the bulkhead.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.4
• /
• pp.652-661
• /
• 1988

A theoretical attempt is made to analyze the dynamic contact force and response of laminated composite beams subjected to the transverse impact of steel balls. A beam finite element model based on the modified theory for laminated composites in conjunction with static contact laws is formulated for the theoretical investigation. Finally, it is shown that the present results are in good agreement with some existing solutions or wave propagation theory.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.735-750
• /
• 1991

본 연구에서는 적층 복합판의 충격 해석을 위하여 Reddy의 고차 전단 변형 이 론에 기초를 두고, 정적 압입 실험에 의한 접촉 법칙을 고려한 동적 유한 요소 해석 (dynamic finite element analysis)을 행하여 충격 실험에 의한 결과와 1차 전단변형 이론에 의한 해와 비교 검토하므로서, 그 유용성과 우수성을 입증하고, 적층 복합재의 충격 응력 및 응력파 전파 특성에 대하여 연구하고자 한다.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2000.11a
• /
• pp.353-356
• /
• 2000

두 물체의 충격운동량-충격 및 탄성파 발생의 순으로 작용하도록 하면 계 내에서 충돌 후 생기는 운동량의 관성 속도와 충돌기간동안 발생하는 탄성파의 충격에너지 전달속도가 다른 경우가 있다. 이것은 충돌기간동안 총 운동량은 보존되나 선 운동량이 비 보존되는 경우가 있어서 충돌기간동안 비 보존된 내부 운동량의 시간 적분만큼 충돌을 가한 질량중심이 이동했다는 의미이다. 충돌기간동안 충격파는 탄성파에 근사시키고 그것은 군속도에 근사시켜 이론적 근거를 만들고 실험에 의해 확인했다. 폐쇄된 계 내에서 내부에너지를 이용하여 특별한 두 물체의 충돌기간동안 비 보존되는 운동량 때문에 질량중심이 이동되는 것에 대해 해석한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.723-734
• /
• 1991

본 연구에서는 투사체의 충격으로 인해 복합재에 발생하는 손상을 해석하기 위해 우선 이와 관련이 있는 손상에너지를 구할 수 있도록 동적 유한요소 프로그램을 개발하는데 있으며, 이렇게 구한 결과들을 Husman의 실험결과와 비교함으로써 본 논문 의 유한요소 프로그램이 적층복합보에 충격으로 인하여 전달되는 총에너지와 손상에너 지를 구하는데 타당한 것인가를 검토하고 이 프로그램을 이용하여 다음과 같은 것들을 해석하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.12 no.3
• /
• pp.68-75
• /
• 1993

포락선 인텐시티는 신호의 진폭 변화에 비해 상대적으로 천천히 벼놔한다. 본 논문에서는 이러한 성질을 이용하여 종래의 순시 음향 인덴시티법을 수정한 새로운 포락선 인텐시티법을 제안하여 비정상 신호 해석에 이 기술을 적용하였다. 이 기술의 유효성은 반사체가 있는 무향실 내의 충격성 음원에 대해 수치계산 결과와 실험결과의 비교로부터 검증되었고 또한, 이 기술은 무향실 및 잔향실 내의 평판 타음 음원의 지향특성 해석에 응용되었다. 수치계산 결과 및 측정결과는 일치하였고, 제안된 방법은 종래의 순시 인텐시티법보다 특히 과도특성을 갖는 충격성 음원 분석에 보다 유효함이 확인되었다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05b
• /
• pp.703-708
• /
• 1995

지진 및 냉각재상실사고와 같은 외력에 대한 집합체 구조적 건전성 분석을 위한 해석시 필요한 지지격자의 동적 특성치들을 얻기 위해 17$\times$17 JDFA 중간지지격자에 대한 충격시험을 수행하였으며, 지지격자에 대한 허용충격하중값(Crush Strength)을 구하고 Impact Duration Method를 이용하여 집합체 구조해석에 필요한 지지격자의 동적 강성도 (Dynamic Stiffness)를 구하였다.

• Journal of Ocean Engineering and Technology
• /
• v.7 no.2
• /
• pp.44-56
• /
• 1993

The purpose of this paper is to analyze the impact response behaviors of glass/epoxy laminated composite plates subjected to the transversely impact of a steel ball. For this purpose, dynamic finite element analysis based on the higher-order shear defomation plate theory is used to compute the contact forces, rebound velocity of a steel ball, and dynamic strain response histories. And low-velocity and high-velocity impact experiments were conducted to compare the results and compute the wave propagation velocities. The results obtained from impact experiments are in good agreement with those of dynamic finite element analysis. Also the wave propagation velocities obtained from high-velocity impact experiments and wave propagation theory agree well, and wave velocities were higher in the smaller radius of steel ball.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.5
• /
• pp.451-457
• /
• 2015

This paper presents the analytical closed form solution for the impact load of a collision between rigid bodies and its application to a spent nuclear fuel disposal canister accidentally dropped and impacted on the ground. This paper performed a study on the numerical rigid body dynamic analysis to compute the impact load between two rigid bodies, especially, the impulsive force which is applied to the spent nuclear fuel disposal canister in the accidental drop and impact event on the ground. Through this study the impulsive force which is occurring in the spent nuclear fuel disposal canister under accidental drop and impact event on the ground and required in the process of structural safety design of the canister is computed numerically. The main content of this numerical study is about the technical method how to compute the impulsive force applied to the canister under the accidental drop and impact event on the ground by using the commercial computer code for the rigid body dynamic analysis. On the basis of this study a problem to compute the impulsive force which is occurring in the canister in the case of collision with the ground is numerically treated. This numerically computed impulsive force is compared with the theoretical value, which shows a good agreement.