• Aerospace Engineering and Technology
• /
• v.10 no.1
• /
• pp.183-192
• /
• 2011

The demand for weight saving and high performance of aircraft require the more uses of composite materials. However the complicate behaviors and various failure characteristics restrict usage of composite materials. Low-velocity impact damage is a major concern in the design of structures made of composite materials, because impact damage is hidden and cannot be detected by visual inspection. Especially, the reduction on compressive strength after impact is influenced by the ply delaminations introduced as damage by impact event. In this research, the numerical analysis was performed to investigate impact damage and compressive strength after impact. It was found that impact force history and compressive strength after impact calculated by the numerical analysis were compared and shown a good agreement with experimental results.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.11a
• /
• pp.92-97
• /
• 2000

Low-velocity impact damage of a thick pressure vessel by composite materials was studied using the modified Herzian contact radius theory. Impactors of various masses and various tup shapes were dropped freely in the range of 20m to 200mm height. With acceleration gage and strain gage installed on the impactor, impact force and acceleration and Contact radius were measured. After a test, the samples were radiographed to scan the state of damage. Compared with hemispherical tup of 12.7mm diameter, the contact radius of hemispherical tup of 25.4mm diameter was bigger. And the experimental data and the theoretical data was different due to the mechanical properties difference. The acceleration value was changed linearly according to the height.

• Journal of Digital Convergence
• /
• v.15 no.7
• /
• pp.223-229
• /
• 2017

Europe, the US and Japan have acquired test results on impact coefficient for a long time and applied it to equipment design to secure safety of structures. However, Korean enterprises use the impact factor held by advanced business to design equipment as it is difficult for them to obtain it through tests. In this paper, NX/NASTRAN, was used to perform static load analysis and impact load analysis of a PCB Handler, semiconductor test equipment, and the result was employed to study how to calculate the impact coefficient with the finite element analysis. The calculation method was applied to the JIS(Japanese Industrial Standard), and the impact coefficient of the PCB handler was calculated as 1.27 for the sudden start or stop. The impact coefficient generated by the analysis is expected to make a great contribution to the industry as it can be used to improve the equipment structure and develop on existing equipment in the future.

• International Journal of Highway Engineering
• /
• v.9 no.3
• /
• pp.91-100
• /
• 2007

The most important thing for driver's safety on the road is equipment of crash cushion as a vehicle protection safety facility. But development of crash cushion is defective because there's no rational and reality way of design. And also without an alternative plan, it rely on crash test hereby it suffers a great economic loss and wastes time. This study that uses data of cash test proves the suitability of single degree of freedom which considers the safety of passengers about three-dimensional complicated Crash Analysis. As the study analyzes the conduct of crash cushion, it want to develop the effective method of design on Single Degree of Freedom Crash Cushion. And it presents the way of crash cushion design through making a crash analysis model with single degree of freedom. To verify the validness of the crash cushion plan, with single degree of freedom plan, we make the level CC2 crash cushion and execute the crash test. A performance test brings satisfied result and a plan of single degree of freedom crash cushion is proven as an one of the way to be a good system which can design crash cushion.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.4
• /
• pp.5-9
• /
• 2019

This paper is to provide the results of a pilot study of the usability and possibility of impact force response signal induced from impacting an object for the assessment of compressive strength of various materials (rock, concrete, wood, etc.) nondestructively. For this study, a device was devised for impacting an object and measuring the impact force. The impact was carried out by an initial rotating free falling impact and following repetitive impacts from the rebound action which eventually disappears. Wood and rock test specimens for different strengths were tested and an impact force response signal was measured for each test specimen. The total impact force signal energy which is assessed from integrating the impact force response signal was compared with the directly measured compressive strength for each specimen. The comparison showed that the total impact force signal energy has a direct relationship with the directly measured compressive strength and the results clearly indicated that the compressive strength of construction materials can be assessed nondestructively using total impact force signal energy which is assessed from integrating the impact force response signal induced from impacting an object.

• Journal of Aerospace System Engineering
• /
• v.13 no.2
• /
• pp.19-25
• /
• 2019

To detect the impact location of a structure, the authors' group conducted a study on piezoelectric paint sensor. The piezoelectric paint sensors are used for impact detection due to their inherent characteristics: sensitivity to high-frequency signal and impact. Additionally, the paint sensor can be applied on curved and complex structures where ceramic sensor would not be applicable. Moreover it is a self-powered sensor therefore no need for an external power source. For impact localization, mosaic pattern electrodes were coated on the specimen and the impact signal obtained from any part of the electrode where the impact occurred. If we more precise impact localization is required, the electrodes should be divided into more parts and impact data acquisition conducted in all the points of the electrode. In this paper, we developed a light, cheap and simple multi-channel data acquisition system to aid in data gathering. In total four channels data acquisition have been tested using the ARM Cortex-M3.

• Composites Research
• /
• v.20 no.5
• /
• pp.1-6
• /
• 2007

This study was performed to make a comparison on low-velocity impact behavior between graphite/epoxy composite laminate and steel plate. In order to validate the proposed scheme fur the impact behavior of the plate, the Karas's impact model was used. The impact models for this comparative study are the graphite/epoxy composite plate having $[0/90/45/-45/-45/45/90/0]_{8S}$ laminate sequence and the steel plate with a steel ball impactor. The low-velocity impact behaviors for two types of plates were comparatively investigated and performed by considering different impactor velocities and weights respectively. In this investigation, it was found that the composite laminate has impact energy absorption effect due to more flexible behavior than the steel plate, and also it has better characteristics on impact damage and weight.

• The Korean Journal of Financial Management
• /
• v.18 no.1
• /
• pp.1-21
• /
• 2001

주가가 장기기억과정에 의하여 생성되면 주가과정에 가해진 충격은 쌍곡선감소율로 소멸한다. 따라서 충격의 영향이 대단히 느리게 감소하여 충격이 지속성을 가진다. 반면 주가가 단기 기억과정을 따르면 지수율로 감소하여 소멸한다. 지수율감소는 충격의 영향을 급속히 소멸시키므로 충격의 영향이 조만간 소멸한다. 따라서 충격으로 변화된 주가는 평균으로 회귀한다. 충격의 영향이 영원히 존재하는 과정도 존재한다. 장기기억과정은 쪽거리차분과정 또는 분수차분과정이다. 차분모수가 분수일 것이 요구되는 시계열은 장기기억과정이다. 주가가 장기기억과정에 의하여 생성되고 있는지의 여부를 검정하였다. 장기기억과정을 형성시키는 차분모수는 분수차분모수이다. 일별 주가지수의 수익률을 사용하여 차분모수를 추정하였는 바 그 값이 0에 근접하고 있음이 밝혀졌다. 그러나 Kospi, Nasdaq과 Mib30은 장기기억모수가 0에 접근하고 있으나 0이 아니다. 따라서 이 지수들은 장기기억과정에 의하여 생성된다고 할 수 있다. 반면 Dow Jones, S&P 500와 Dax는 장기기억모수가 0이라는 가설이 기각되지 않고 있어 이 지수들은 단기기억과정을 따르고 있다. 따라서 평균회귀과정에 의하여 생성되고 있음을 알 수 있다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.2
• /
• pp.88-98
• /
• 1998

A waveform for shock response spectrum test on a shaker is synthesized using wavelets such that a specified shock response spectrum of a test profile is achieved. The parameters of a wavelet are center frequency, amplitude, number of half cycles, delay and polarity. The amplitude of each wavelet component is iteratively adjusted so a specified shock response spectrum is matched. The waveform so synthesized is regarded as a reference acceleration waveform for a shaker shock response spectrum test. The author proposes the use of a long duration and low peak waveform. The usefulness of this approach is illustrated with some examples.

• Journal of computational fluids engineering
• /
• v.6 no.4
• /
• pp.43-53
• /
• 2001

본 논문은 충격파 불안정성이 나타나지 않는 충격파 안정적인 수치기법의 개발을 목표로 하고 있다. Roe의 수치기법은 유동의 수치계산에 있어 높은 정확도를 보장하지만 carbuncle 현상과 같은 충격파 불안정성이 나타나는 것으로 알려져 있다. Roe의 수치기법과 HLLE 수치기법의 수치점성을 비교하여 충격파 불안정성의 원인을 살펴보았으며, Roe의 수치기법에 나타나는 반감쇠항에 마하수의 함수인 조절함수 f와 g를 도입하여 충격파 안정성을 획득하였다. 본 논문에서 제안된 수치기법을 다양한 유동문제에 적용하여 수치기법의 충격파 안정성과 정확성을 검증하였다