• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.3 s.96
• /
• pp.272-279
• /
• 2005

In this study the optimal isolation system for the prototype HIFD(high impulsive force device) is investigated. For this purpose, firstly, the dynamic behavior of a human body and a transmitted force under specific operation conditions are analyzed through a series of experimental works using the devised test setup. In order to design the optimal dynamic absorbing system, the parameter optimization process is performed using the simplified isolation system model based on the experimental results of linear impulse and transmitted force. Finally, under the parameters satisfying the constraints of the buffering displacement and the transmitted force, the performance of the designed isolation system for the prototype HIFD is evaluated by experiment.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.12
• /
• pp.3185-3194
• /
• 1994

In this study, an impact model and impact response analysis method was suggested for the impacts between arbitrary shaped bodies. Unlike the impacts between geometrically simple structures, there is no rules to analyze the impacts between general elastic structures First of all, it has been attempted to explain the impoot between arbitrary elastic structures as the elastic deformation of a virtual contact spring in the vicinity of contact points. The contact stiffness and the exponent are determined from the Hertz's contact theory and F. E. analysis. In order to evaluate the validities and limitations of the proposed methods, an impact tester and the miniature of container, missile and isolators have been provided and tested experimentally. All the experiments were performed with various impact conditions. The results obtained by the proposed methods were directly compared with the measured values in terms of maximum contract force, contact duration, the shape of contact force and the structure responses. The computed contact force and responses, using this proposed methods, were very close to the measured results, unless any plastic deformations were presented.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.5 s.248
• /
• pp.550-559
• /
• 2006

This paper presents designs and performance investigations of two bypass-type MR (magneto-rheological) shock dampers for high impulsive force systems, one of which is with single rod and the other with double rod. First of all, on the basis of the Bingham properties of the MR fluid and the magnetic field analysis of the magnetic circuit, the MR shock dampers are designed and manufactured. After experimental investigations on their magnetic field-dependent damping forces and responses characteristics, dynamic models of the proposed dampers are formulated and compared. Then, a simple 1 degree-of-freedom mass-drop system is constructed, and the effective and practical control algorithm is designed by considering dynamic characteristics of the shock control system. The shock control performances of the proposed MR shock dampers are verified through the comparison study of experiment results with simulation ones.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.372-375
• /
• 2009

반도체 봉지재란 실리콘 칩, 골드와이어, 리드프레임 등의 반도체 소지를 열, 수분, 충격으로부터 보호하기 위해 밀봉하는 재료로서 EMC(Epoxy Moding Compound)가 가장 많이 쓰인다. EMC는 기계적, 전기적 성능향상을 위한 무기재료로 실리카(Silica), 열에 의해 경화되어 3차원 경화구조를 형성하는 에폭시수지, 빠른 경화특성을 부여하기 위한 경화제로서의 페놀수지, 유기재료와 무기재료 사이의 결합력을 높이기 위해 커플링제, 카본블랙, 이형성 확보를 위한 왁스(Wax), 착색제(Colorant), 난연제(Flame Retardant)등의 첨가제로 구성되는 복합소재로써 본 연구에서는 에폭시의 유형에 따른 용융 실리카를 주충진재로 하여 각각의 봉지재의 첨가제를 기준으로 할 때 다양한 형태의 친환경 비할로겐계 반응형 난연제를 합성하는 기술을 개발하고 비 할로겐계 및 Sb 계 첨가형 난연제의 혼용 배합을 통해 친환경 EMC용 난연제의 제조기술을 개발하였다. 이들 EMC의 요구특성은 요구특성은 외부환경으로부터 칩 보호, 칩을 전기적으로 절연특성 유지, 칩의 작동시 발생되는 열의 효과적인 방출 특성 유지, 실장(Board Mounting)의 간편성 특성을 확보해야 하는 특성을 지니고 있어 이들 요구특성에 적합한 특성조사가 함께 이루어졌다.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.4
• /
• pp.89-93
• /
• 2018

Ceramic substrates applied to power modules of electric vehicles are required to have properties of high thermal conductivity, high electrical insulation, low thermal expansion coefficient and resistance to abrupt temperature change due to high power applied by driving power. Aluminum nitride and silicon nitride, which are applied to heat dissipation, are considered as materials meeting their needs. Therefore, in this paper, the properties of aluminum nitride and silicon nitride as radiator plate materials were compared through a commercial analysis program. As a result, when the process of applying heat of the same condition to aluminum nitride was implemented by simulation, the silicon nitride exhibited superior impact resistance and stress resistance due to less stress and warping. In terms of thermal conductivity, aluminum nitride has superior properties as a heat dissipation material, but silicon nitride is more dominant in terms of reliability.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.5
• /
• pp.430-436
• /
• 2014

The mission objective of STEP Cube Lab. (Cube Laboratory for Space Technology Experimental Project) classified as a pico-class satellite is to verify the technical effectiveness of payloads such as variable emittance radiator, SMA washer, oscillating heat pipe and MEMS based solid propellant thruster researched at domestic universities. In addition, the MEMS concentrating photovoltaic power system and the non-explosive holding and separation mechanism with the advantages of high constraint force and low shock level will be developed as the primary payloads for on-orbit verification. In this study, the feasibility of the mission actualization has been confirmed by the preliminary system design.