• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.62-64
• /
• 2019

산지등대가 무인화 됨에 따라 모국(우도등대)에서 산지등대의 시설물을 보안, 관리 및 운영에 대해 고민하고 효율적인 관리를 위해 검토 내용을 설명하고 예산절감 사례를 발표하고자 함.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.4
• /
• pp.47-53
• /
• 2011

The Electric Multiple Unit (EMU) has many types of door system such as sliding door, plug door etc.al. according to customer's requirements. The sliding door is widely used in Korea but has weak point in the noise problem. In the low operation speed, the noise coming from outer side of the EMU is not an important factor. As the speed is higher than before, noise is increased and make a problem. The main cause of noise is the imperfect air tightness in the EMU. The plug door system has advantages for the noise reduction characteristic in the high speed area. We have been developing electric plug-in door. The door is controlled by Door Control Unit(DCU) following the order of Automatic Train Protection (ATP) that is a kind of train signalling system. DCU has to simultaneously open and close the doors and the operation of it is related to the passengers safety. So DCU is a safety device that is important to reliability and safety. DCU is composed of several devices of control, motor driving, Input/Output, communication and power. In this paper, we will describe the functions, characteristic, requirement, subsystem and test results of DCU used for the electric plug-in door.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.31-38
• /
• 2011

In this paper, we propose an autonomous Indoor lighting control system in which indoor lighting devices are autonomously controlled such that electricity bills are minimized in our daily life. Our focus is to utilize Passive Infrared (PIR) sensors to detect the presence of human being indoor and automatically to control indoor lighting electric devices. A control algorithm is also devised to control the whole system. We justify the proposed system by demonstrating specific applications in our everyday life. Cost survey and experimental results also demonstrate the efficiency of the proposed system in real life.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2781-2783
• /
• 2000

방범에 사용되는 여러 종류의 센서를 컴퓨터를 이용하여 사용할 수 있는 방안을 연구하고 기술적인 문제를 파악하여 해결하고, Protocol을 정하여 방범 시스템 프로그램을 작성하고 컴퓨터 상에서 효율적인 방범이 이루어질 수 있도록 했다. 본 연구의 보안 시스템의 동작 순서는 다음과 같다. 사용자는 외출할 때 출입문 근처에 설치되어 있는 키패드를 이용하마 방범시스템을 작동시킨다. 침입자가 있으면 여러 장소에 설치된 센서가 감지되어 이 신호를 인터페이스를 통해 컴퓨터로 보낸다. 컴퓨터는 신호가 감지된 위치, 감지 시간을 기록하고 USB 포트에 연결된 CCD 카메라를 통하여 영상을 저장하고. 보안 책임자의 전화기로 침입자가 있다는 사실을 통보해 주도록 설계된 시스템이다. 방범시스템의 해제는 키패드를 이용하여 비밀번호를 입력하여 저장되어 있는 번호와 동일할 경우에만 해제가 될 수 있도록 구성하였다.

• Convergence Security Journal
• /
• v.24 no.1
• /
• pp.59-68
• /
• 2024

With advancements in artificial intelligence technology, intelligent CCTV systems are being deployed across various environments, such as river bridges and construction sites. However, a conflict arises regarding the opening and closing of rooftop access points due to concerns over potential accidents and crime incidents and their role as emergency evacuation spaces. While the relevant law typically mandates the constant opening of designated rooftop access points, closures are often tacitly permitted in practice for security reasons, with a lack of appropriate legal measures. In this context, this study proposes a detection system utilizing intelligent CCTV to respond to emergencies that may occur on rooftops. We develop a system based on the YOLOv5 object detection model to detect assault and suicide attempts by jumping, introducing a new metric to assess them. Experimental results demonstrate that the proposed system rapidly detects assault and suicide attempts with high accuracy. Additionally, through a legal analysis of rooftop access point management, deficiencies in the legal framework regarding rooftop access and CCTV installation are identified, and improvement measures are proposed. With technological and legal improvements, we believe that crime and accident incidents in rooftop environments will decrease.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.8
• /
• pp.495-501
• /
• 2016

The measurement of icing conditions needs to be carried out accurately by the ice detector system of an aircraft. Ice detector systems should be installed in locations not affected by backwash, rotor downwash or moving doors or other equipment. Various analyses were carried out in order to find the proper locations sufficiently far from these interfering effects. In this study, the optimum position of the ice detector was assessed using computer simulation, with respect to different flight modes, flow velocities and the amount and distribution of liquid water around the sensor.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.106-107
• /
• 2021

This paper implements a door lock using PIR sensor based on Arduino. When the PIR sensor detects movement, the door lock device is activated and RFID tags can be used. This door rock can prevent lonely death by detecting whether the resident is in or out, and it also has hygienic advantage because it unlocks without contact by using RFID. In addition, as door locks are frequently used in everyday life, the above-mentioned implementation can also increase participation in hands-on lectures.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.1063-1070
• /
• 2005

Number of subway train units that Seoul Metropolitan Subway Corporation as at September 2005 is 1.944 on 4 routes from 60 units at the time of commencement of operation, having grown exponentially. Along with increase in the number of passengers the role of subway as safer and expedient means of transportation is now being required. Furthermore, the Corporation has been researching on means of improving the safety and reliability of subway entry/exit doors which has become an essential task and directly effect the safety of the passengers. In this Study, has developed sensory control system for the entry/exit door of the subway train using non-contact proximity sensor as a part of review of and measures against various issues of entry/exit door of the subway trains currently under operation. In addition, this sensor system was verified through test production and tests. If this technology becomes commercialized and practically utilized in the future, it would be able to make definite contribution to the safer transportation of passengers.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.929-932
• /
• 2007

The integrated prevention of disaster management system is collected prevention of disaster data from prevention of disaster relation other systems and smart sensor in USN. This system manages fire fighting facility effectively. The relation equipment which is used in existing and network using "Open Protocols" about under using the support system which is integrated effectively as the destroyer. It connects CCTV, the sensitivity environmental sensor, automatic fire detection equipment and security equipment and air flow equipment system using Internet. The System Server was collected monitoring data at the each equipment and processing by operational scenario. It will verified the effectiveness of operational scenario and integrated prevention of disaster management system

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.4
• /
• pp.174-179
• /
• 2018

Currently, various security technologies such as fingerprint recognition and face recognition are being developed. However, although many technologies have been developed, the field of incorporating technologies is quite limited. In particular, it is easy to adapt modern security technologies into existing digital systems, but it is difficult to introduce new digital technologies in systems using analog systems. However, if the system can be widely used, it is worth replacing the analog system with the digital system. Therefore, the selected topic is the electronic attendance system. In this paper, a camera is installed to a door to perform a Haar-like feature training for face detecting and real-time face recognition with a Eigenface in principal component analysis(PCA) based face recognition using raspberry pi. The collected data was transmitted to the smartphone using wireless communication, and the application for the viewer who can receive and manage the information on the smartphone was completed.