• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.382-382
• /
• 2023

기존의 GRM(Grid based rainfall-Runoff Model)에서는 강우-유출 사상에 대한 유출 모의를 주요 대상으로 하였다. 본 연구에서는 GRM 모형에서 연속형 모의가 가능하도록 차단, 증발산, 융설을 모의할 수 있는 모듈을 개발하였다. 차단은 LAI의 연최댓값과 해당월의 값의 비율을 이용해서 계산하며, 증발산은 Blaney-Criddle, Hamon, Hargreaves, Priestly-Taylor 방법을 적용하였다. 융설은 Anderson에 의해서 제안된 방법을 적용하였다. 연속형 모의를 위한 모델 매개변수 설정 인터페이스를 추가하였으며, 기온, 일사량, 일조시간 등의 기상자료를 입력할 수 있게 하고, 계산된 각 수문성분을 출력할 수 있도록 GRM 모형의 입력과 출력 모듈을 개선하였다. 충주댐 유역을 대상으로 개선된 모형을 적용하였다. 공간자료의 해상도는 500m × 500m로 구축하였으며, 수문학적 지형정보와 토양도, 토지피복도를 구축하였다. 기상자료를 강수량, 일최고 기온, 일최저 기온, 일조시간, 일사량을 적용하였다. 증발산은 Hargreaves 방법을 이용하여 모의하였다. 모의 기간은 2001년 ~ 2018년이며, 이 중 2004년까지의 4년은 모델 warming up 기간으로 하고, 적합도 평가는 2005년 ~ 2018년의 모의결과를 이용하였다. 충주댐 유입량 모의결과를 관측값과 비교하였을 때 Nash-Sutcliffe model efficiency coefficient(NSE) 0.84, 상관계수 0.92, 총용적 오차는 0.26%를 나타내어 관측유입량을 잘 재현하였다. 그러므로 본 연구에서 개발된 차단, 증발산, 융설 모의 기법은 적절히 구현된 것으로 판단되며, GRM을 이용한 연속형 모의가 가능한 것으로 나타났다. 향후 연구에서는 좀 더 다양한 유역에 대해 GRM을 이용한 연속형 유출모의 결과를 평가할 필요가 있다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.2
• /
• pp.269-276
• /
• 2023

In this research works, we propose a hybrid power generation system for drone capable of staying in the air for more than 1 hour. This power system converts the alternating current generated by the generator into direct current through a diode bridge circuit to charge the battery and uses a battery system having separated cells to obtain high controllability of the power system. The fuel efficiency and the power output for individual load were analyzed, and also the performance of a selected generator was studied in this paper. The drone which is equipped with the proposed hybrid power generation system calculated 0.82 ratio for weight vs power output, and flight time of drone showed 4,179 seconds.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.134-135
• /
• 2011

이 연구의 목적은 백색 LED 광원의 색이라도 색온도에 따라 심리적 안전감과 명시성이 달라진다. 따라서 색온도를 조정할 수 있는 스탠드라이트 광원을 만들면 장시간 사물과 책을 볼 시 눈의 인지능력 향상과 눈의 피로를 감소시킬 수 있다. 본 연구를 통하여 3가지 색온도 백색 3000K 대역, 5000K 대역, 6600K 대역의 LED 광원을 이용하여 산술적 합성의 의하여 4000K 대역, 6000K 대역 등 다양하게 색온도를 구현하여 실제적으로 조명을 조사하여 인지능력과 눈의 피로가 감소 시킬 수 있는 색온도를 갖는 스탠드라이트 광원을 찾는데 목적을 둔다. 또한 4000K인 경우 3000K와 5000K LED 출력을 1:1 비율로 조사하면 4000K의 색온도가 나올 것으로 이론상 가능하고 2:1 비율로 조사하면 3500K의 색온도가 나올 것으로 예상되며 총 9가지의 산술적 조명을 구현한다. 스탠드라이트 광원을 자주 사용하는 고등학생을 대상으로 학습 분위기를 조성할 수 있는 9가지 백색 LED 색온도 광원 중 1개를 선택하여 가장 적합한 조명의 수요도 조사를 하고 본 연구의 색온도 산술적 합성 연구의 실험을 통하여 색온도가 조절 가능한 스탠드 라이트를 상용화 하는데 논문의 목적을 둔다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.772-776
• /
• 2011

EAV-2, which has a solar cell, fuel cell and battery as its power sources, is under development by KARI. Electric power sources are selected through voltage matching without power converter and controller and tested. The ground integrated test for integrated system is performed during 5 hr. it is confirmed that battery's power response is faster than other power sources at starting and transient condition, fuel cell and solar cell are a major electrical power during cruise condition. It is revealed that the used energy portions of fuel cell, solar cell and battery are 68%, 29%, 2.5% respectively.

• 연구논문집
• /
• s.29
• /
• pp.123-130
• /
• 1999

Flow divider valve, a kind of hydraulic control valve to divide the flow from one input line to two output line uniformly, should be able to keep the constant flow to output lines despite of the change load or supply pressure. Having 5-10% flow diving error in commercial hydraulic products is one of main source of the accumulated error caused hydraulic system problem and demands the development of flow divider valve to control flow more accurately, In this paper, the dynamic characteristics of flow divider valve are investigated by the numerical estimation of the spool motion considered the external supply force. The optimum design of flow divider valve are proposed to reduce the flow diving error. For the dynamic characteristics analysis, the change of sectional area of fixed and variable orifice, and spool are studied when the input signal is accepted to a constant load.

• Composites Research
• /
• v.27 no.6
• /
• pp.236-241
• /
• 2014

This paper aims to evaluate material property variation of polymer concretes under ultra-violet exposure condition. The components and mixing ratio of the polymer composite specimens were determined by the previous research results. The equivalent UV exposure time was calculated with the consideration of the power of metal halide lamp and maximum 3 years were selected for the experiments. From the tests, it was found that the generated heat during UV exposure affected much the material properties of polymer concrete by means of post cure. As a result, the compressive strength increased and ductility factor decreased.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.2
• /
• pp.74-79
• /
• 2015

$Na-ZnCl_2$ battery, which operates as the same mechanism of $Na-NiCl_2$ battery using solid-electrolyte, is able to reduce its material cost by 40 % comparing to the $Na-NiCl_2$ battery. It has been known that the $Na-ZnCl_2$ battery produces $Na_2ZnCl_4$ as an intermediate phase during charge/discharge process. Therefore, the redox process is divided into four steps having the voltage range of 1.92~2.13 V. However, effects of the critical factors such as the composition of cathode materials, depth of charge and discharge, and additives have not been reported yet. We examined the effect of the Zn/NaCl ratios and revealed that its optimum ratio was in the range of 1.3~1.7.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.1
• /
• pp.8-14
• /
• 2014

This research designed Waste Heat Recovery System(WHRS) generation system of 250kW whose working fluid is R-245fa and studied on cycle characteristics by superheater organization. It simulated two conditions; series connection and parallel connection between superheater and evaporator. In simulation of series connection of superheater and evaporator, output of 4.7% could be improved because of the increase of enthalpy by overheating of working fluid. When setting 250kW for target output, cycle flux could be reduced by 4.1%. When setting 250kW as a target output of cycle In parallel connection simulation of superheater and evaporator, cycle flux was reduced as flux of heat source fluid for superheater was increased. So, the maximum 7.9% of working fluid pump's electric power was reduced and there was no big change in cycle efficiency and net efficiency by flux ratio.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.1
• /
• pp.43-51
• /
• 2010

This paper proposes an analysis of voltage delay and compensation for current control in H-Bridge Multi-Level (HBML) inverters for a medium voltage motor drive with vector control. It is shown that the expansion and modularization capability of the HBML inverter is improved in case of using Phase-Shifted Pulse Width Modulation (PSPWM) since individual inverter modules operate more independently. But, the PSPWM of HBML has a phase difference between reference voltage and real voltage, which can cause instability in the current regulator at high speed where the ratio of the sampling frequency to the output frequency is insufficient. This instability of the current regulator is removed by adding a proposed method which compensate a phase difference between reference voltage and real voltage. The proposed method is suitable for HBML inverter controlled by PSPWM with low switching frequency and high speed motor drive. The validity of the proposed method is verified experimentally on 6,600[V] 1,400[kW] induction motor fed by an 13-level HBML inverter.

• Korean Journal of Optics and Photonics
• /
• v.10 no.2
• /
• pp.162-168
• /
• 1999

A new design of four-pass dye laser amplifier affording a narrow-bandwidth pulsed output is demonstrated to suppress the amplified spontaneous emission(ASE) carried by the amplifier output and reduce the possibility of parasitic oscillation in the amplifier. By the direct pulsed amplification of a cw 100 mW dye laser under a Q-switched doubled Nd:YAG laser pumping with energy of 5.6 mJ/pulse, high-peak-power pulsed output with 1.5-mJ energy in 130-MHz bandwidth is obtained corresponding to a power gain greater than $2{\times}10^6$ and an energy efficiency of 27%. The ASE ratio in the four-pass amplifier output is dramatically reduced by using a diffraction grating in the amplifier. Compared with the results obtained from the normal operation of the amplifier with no frequency-selective device, the ASE ratio is reduced by a factor in excess of 10 to remain under 1.5% of the amplifier output whereas the total output energy is slightly increased by ~4%.