• Journal of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.78-84
• /
• 1991

In an effort to increase effective action of enkephalins, several peptide inhibitors of enkephalin aminopeptidase have been synthesized. The peptides contain 3-amino-2-hydroxy amino acid as a zinc binding site and side chains of substrate pattern. The peptides were synthesized in solution by chain elongation from C-terminal end using DCC/HOBt as coupling reagent. The peptides are shown to have very strong inhibitory activity against enkephalin aminopeptidase.

• Textile Coloration and Finishing
• /
• v.6 no.1
• /
• pp.19-27
• /
• 1994

Mimosa and Quebracho are, in general, tanned with leather skin, finished silk fabrics according to temperature, treatment time, tannin concetration, pH, and studies that relation between tannin weighting and various factors. This makes fundamental study on characteristic of tannin treated fabrics. and the results are as fallows : 1. λ$_{max}$ was found at 278.5nm for Mimosa. 279.5nm for Quebracho. Also a stability was good in standing time and heating. 2. The higher tannin treatment temprature was, the better tannin weighting effect was. But they were slightly decreased at over 8$0^{\circ}C$, and K/S was slowly increased. 3. As tannin treatment time increased, tannin weighting effect increased but they were decreased at over 8$0^{\circ}C$, 90min. 4. As tannin concentration increased, tannin weighting was increased. 5. In tannin weighting effect according to various pH conditions, the it's best range of pH were 3.5~5.5 of Mimosa, 2.5~3.5 of Quebracho.o.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.214-215
• /
• 2006

Colloidal Silica(CS)와 유기수지를 혼합하여 서로의 단점을 보완하는 나노복합재료를 합성하기 위해 친수성인 CS를 유기실란으로 표면처리하여 소수성화하고 유기수지와 복합체를 제조하였다. CS표면의 -OH기와 실란의 -OH기가 축합반응하여 화학결합을 형성함으로서 CS의 표면은 실란의 $CH_3$에 의해 소수성화되어 CS sol이 제조된다. CS sol과 유기수지는 공동용매에 의해 균일한 분산이 가능하고 필름 및 코팅제로의 제조가 가능하다. 사용된 무기물은 40nm 의 크기를 가지므로 가시광선영역의 빛을 산란하지 않아 투명하고 사용된 수지 또한 투명하여 우수한 광학적 특성을 나타낸다. 만들어진 필름은 CS의 영향으로 유기수지의 내열성보다 향상된 열분해온도와 높은 접촉각, 높은 절연율을 보였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.110-110
• /
• 2000

Sol-Gel법은 산화물 전구체(precursor) 상태인 Sol상태로부터 가수분해, 중, 축합반응을 거쳐 최종적으로 Gel 산화물을 합성하는 방법이며 기존의 세라믹스를 합성할 수 있고 고순도의 균질한 화합물을 용이하게 얻을 수 있는 특징이 있다. 최근 전자부품이 소형, 경량화되는 추세에 따라 전자 세라믹스분야에서도 박막화가 대두되고 있는 가운데 Sol-Gel법은 dipping, spining 및 spray 법등을 이용하여 박막의 제작이 가능하며 CVD, PVD, sputtering 법등과 같은 박막제작에 비하여 장비가 복잡하지 않으면서 제작기법이 간단한 이점을 가지고 있다. 소재면에서 볼 때 TiO2 물질은 물리적, 화학적으로 안정하고 굴절율, 착샐율 및 반사율 등이 우수한 재료로서 세라믹스 콘센서, 압전소자, 습도센서와 가스센서분야등에 있어서 중요한 위치를 점하고 있어서 연구자들에게 많은 관심을 가지게 하였다. 본 연구에서는 Sol-Gel법에 의해 TiO2 Sol을 합성한 후 dipping 법으로 박막을 제작하고 박막의 전기전도 특성 및 습도센서소재로의 개발을 위해 습도감지특성에 주목하였고 경시변화로 인해 생성된 Gel powder의 물성에 대해서도 검토하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.10a
• /
• pp.109-110
• /
• 2009

실리카와 폴리아닐린의 core-shell 복합체 나노입자를 실리카 나노입자 분산용액을 이용하여 제조하였다. 제조된 복합체 나노입자를 전기변색박막의 소재로 이용하기 위하여 알코올 용액에 분산하였고, 분산된 용액에 Tetraethoxysilane (TEOS)를 소량의 HCl 용액과 함께 첨가하여 코팅 용액을 제조하였다. 코팅 용액을 인듐주석산화물(ITO) 박막이 도포된 유리 기판위에 도포하고 열처리 하여 매우 높은 부착력을 갖는 전기변색박막을 얻을 수 있었다.

• Analytical Science and Technology
• /
• v.19 no.6
• /
• pp.504-511
• /
• 2006

Polysilanes with organic substituents such as methyl and phenyl were synthesized by Wurtz dechlorination-condensation reactions using ultrasonic from organochlorosilanes. The yields were compared with the results of thermal dechlorination-condensation reactions. Properties such as thermogravimetric analysis and photoreactivity were investigated for the possibility of applications.

• Journal of Korean Society of Forest Science
• /
• v.24 no.1
• /
• pp.45-52
• /
• 1974

This study was carried out to examine the subsitution possibility into water soluble amino resins instead of phenolic resin as a sizing material for the strength increase on the wet forming hardboard. The properties of hardboard, manufactured with amino-resins based urea, melamine, formaline, and methanol which were low priced domestic products, were examined in comparison with those of hardboard treated with phenolic resin. In this study by the results and discussions, it may be summarized as follows: 1. Amino-resins are able to be substituted for the phenolic resin as a good sizing material for strength increase in the manufacture of wet forming hardboard. Under the considerations of economic advantages and properties of hardboard, modified urea-melamine resin was given a best results. 2. The specific gravities of hardboard that were treated with phenolic resin was equal to that treated with modified amino type resin, and in case of urea-melamine resin, the specific gravity value were lowest among them. 3. The results of moisture contents were satisfied the standard which calls for 13 percent or below. There were no differences in moisture contents between hardboards, treated with melamine resin and modified urea-melamine resin but phenolic resin. The moisture contents of hardboard treated with phenolic resin was shown the lowest. 4. The water absorption of hardboard treated with phenolic resin was greater than those treated with amino resins, and to satisfy the standard of water resistance, the treatment of 2 percent paraffin wax emulsion was needed in this case. There were no differences in water absorptions between hardboards, treated with melamine resin and modified urea-melamine resin. To satisfy the standard of water resistance in this case the treatment of 1 percent paraffin wax emulsion was shown good results. 5. The differences among the flexural strength in using tested three adhesives were significant. The flexural strength were shown the signification by order of melamine resin, modified urea-melamine resin, and phenolic resin. In all cases to satisfy the standard of flexural strength, the treatment of 3 percent sizing materials for strength increase was needed.

• Journal of the Korean Chemical Society
• /
• v.43 no.1
• /
• pp.28-42
• /
• 1999

Polysilanes with sterically bulky substituents, -[2-( $R^1R^2$-phenyl)propyl]Si[$R^3$]-, such as poly(2-phenylpropyl)(n-hexyl)silane [$R^1=R^2$=H, $R^3$=n-hexyl] were prepared by Wurtz-type coupling reactions with Na using a sonochemical method. The high-intensity ultrasound provided the formation of high quality Na dispersion in toluene and its active surface which was important for the synthesis of polysilanes in Wurtz-type coupling reaction was freshly and continuously regenerated during the process. The polysilanes products were mixtures of high molecular weight polymers with $\={M}_W$ of ∼$10^6$ and low molecular weight polymers with $\={M}_W$ of ∼$10^3$. It was found that the formation of high molecular weight polymerr was greatly influenced by the substituents $R^3$, directly attached to Si. On the contrary, changes on substituents ($R^1, R^2$) gave no influences at all. Overall yields for polysilanes were 75-99% in general but high molecular weight polysilanes were obtained as a major product when substituent $R^3$ is n-hexyl group and low molecular weight polysilanes were obtained as a major product when substituent $R^3$ is cyclohexyl and 2-phenylethyl groups. Effects of reaction conditions to polysilane yields were investigated.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.3
• /
• pp.243-249
• /
• 2017

This study was performed to find out the optimum adhesive conditions on manufacturing a cross-laminated timber (hereinafter CLT) with using domestic Korean Pine (Pinus koraiensis). The adhesive conditions including a applied amount of the glue and a Pressure are the one of the most important key factors on establishing CLT production process. The shear strength was examined with differing the adhesive conditions while using Phenol Resorcinol Formaldehyde Resin Adhesive (PRF resin). The optimum adhesive conditions was confirmed to be: glue spread of $250g/m^2$ and Pressure of 0.8 MPa respectively. The grain directions of glued specimens were also considered, perpendicularly bonded and parallelly bonded groups. Shear strength of the former group showed lower values than the latter group which is considered to be the effect of a rolling shear. Meanwhile the shear strength of both group satisfied the Korean Standard (KS F 3021) and the European Standard (EN 14080 and EN 16351). The results derived from this study can be used as the basic data for manufacturing the CLT with domestic Korean Pine. And additional researches for the other species including domestic Korean Larch and Pitch Pine is also now being performed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.3
• /
• pp.505-510
• /
• 1999

The seasonal variations of chemical composition of jujuba leaf were studied by analyzing general composition, amino acid composition, fatty acid composition, mineral, phenol, condensed tannin, flavonoid contents. Fresh jujuba leaf contained 4.42~6.31% protein and 4.31~5.71% fat on wet basis. Jujuba leaf was rich in aspartic acid, glutamic acid and leucine, but methionine was a limiting amino acid. Four kinds of free sugar, i.e. glucose, fructose, sucrose and maltose were found in jujuba leaf. The contents of fructose and glucose increased during growth, while the contents of disaccharides, sucrose and maltose, decreased. The main fatty acids of the leaf were palmitic acid, linoleic acid, stearic acid and oleic acid. Jujuba leaf was rich in K, Na and Ca, however, the amounts of Fe, Mn and Cu were low. The contents of Ca and Na increased during growth but the content of Mg decreased. The content of total phenolic compound was 0.83~0.89% and the content of condensed tannin was 0.40~0.45%. Two major flavonoids such as rutin and isoquercitrin were detected and their contents were 103.8~125.2mg/kg and 26.2~40.0mg/kg, respectively.