• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.1
• /
• pp.29-36
• /
• 2011

The main purpose of this paper is to make a map showing canopy cover by using airborne Lidar data based on region. Watershed algorithm was applied to elevation data to conduct segmentation, and then canopy cover was estimated through the regions extracted. In the process of transforming point data to raster, we solved the problems about overestimation and underestimation by using frequency method. Also, canopy cover map could be produced with various scales by differing level of segmentation and it provides more accurate and precise information than ones of ordinary public forest map.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.33-36
• /
• 2004

Ministry of Information and Communication(MIC) have operated R ＆ D Program by Informatization fund from later 1980. In according to the MIC, Institute of Information Technology Assessment (IITA) have worked for IT Small and medium size company's R ＆ D on the If Industry competition program and Excellent Information Technology Program. these Program output is very interesting. These Program have some problem in management, poor performance analysis skill and had not diverse data. But for the IT industry and company, these program is very good opportunity. So, this paper suggestion the advanced systems.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.716-716
• /
• 2012

최근 항만구조물을 설계함에 있어 대수심 및 고파랑 지역에 설치되는 외곽시설의 상당수는 직립식 케이슨 혼성제 단면을 채택하고 있다. 이는 상대적으로 수심이 깊고, 설계파와 같은 외력 조건이 크기 때문에 경사제에 비하여 경제성 및 시공성이 유리하기 때문으로 판단된다. 그렇지만 아직까지 소규모 항만 및 어항시설에 있어 경사제를 채택하고 있다. 본 연구에서는 이와 같은 경사식 구조물을 설계함에 있어 월파에 의한 방파제 배후 경사면에 피복된 피복재의 안정성을 검토하며, 실험사례를 통하여 최적 설계안 및 설계방향을 제시하고자 한다. 경사식 구조물 배후 사면 피복재의 안정 중량에 대해서는 우리나라의 항만 구조물의 설계기준(항만 및 어항설계기준, 2005) 뿐만 아니라 국외의 설계기준(CEM, Coastal engineering manual, 2005 등)에서도 아직까지 설계법을 제시하고 있지 않고 있다. 본 연구에서 수행한 단면 수리모형실험에서는 1/50의 실험축척을 적용하여 대상 외곽 구조물에 대하여 수리특성과 안정성을 검토하였다. 특히 경사제 배후의 안정성 확보를 위하려 동일 구간에 대하여 설계파 조건 등을 중심으로 총 9개의 실험안을 설정하여 안정성을 검토하였다. 아래 그림은 이중 초기 설계안과 최종적으로 제안된 제시안에 대한 완성모형, 실험장면 및 결과이다. 일반적으로 접안시설과 외곽시설이 어느 정도 이격되어 있어 적정량의 월파를 허용할 수 있는 경우 상치콘크리트의 형상 및 마루높이을 변경하여 월파의 낙하 및 도달거리를 배후면의 안정성을 확보할 수 있을 정도로 유도함으로써 안정적인 구조물 설계가 가능할 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.320-320
• /
• 2018

습지는 해안선 정화, 홍수조절, 수질정화 이외에도 문화적 여가활동 및 관광 등 다양한 기능을 하고 있다. 이처럼 습지의 기능 및 다양성을 보전을 위해서는 습지에 유량이 유지되어야 하지만, 기후변화로 인한 온도 상승과 불규칙한 강우 패턴으로 인해 습지의 유량이 유지되지 못하고 육화되고 있다. 습지의 육화 및 건조화의 지연 및 방지를 위해서는 습지의 유량변동을 파악이 중요하며 국내외적으로는 물수지 방법이 많이 이용되고 있다. 하지만 산지습지의 경우 규모가 작고 고립되어 있어 물수지방법을 통한 유량변동 분석 연구가 하천습지나 연안습지에 비해 상대적으로 적은 추세이다. 산지습지는 퇴적물 축척으로 형성된 환경변화의 모습을 담고 있으며 또한 산지습지와 같은 특수 환경에 서식하는 생물의 서식지 역할 등 중요한 역할을 한다. 따라서 본 연구에서는 경상남도에 위치한 산지습지인 장군습지를 대상으로 삼았으며 물수지 방법을 기반으로 하는 SWAT모형을 이용하여 유출특성 분석을 하였다. 또한 기상자료로는 주변 기상관측소와 장군습지 내 설치한 강수계, 온 습도계, 수위계를 활용하여 장군습지 내 유입량과 유출량을 분석하였으며 본 결과를 통해 향후 장군습지 보전을 위한 유지관리 방안을 제안하고자 한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.432-432
• /
• 2022

하천의 하상재료는 토양 유실량 및 유사량 산정, 유사이송, 하상변동, 하천환경 등 여러 분야에 영향을 미친다. 하상재료는 강수 및 유량 등 여러특성들의 상호작용으로 인해 지속적으로 변화하며, 하천 분야의 각종 해석 및 영향 평가 등에 이용되는 활용성을 감안하여 하상재료는 체계적인 관리시스템이 필요하다고 판단된다. 효율적인 하상재료 관리를 위하여 한국수자원조사기술에서 수행한 하천유역조사, 유사량조사, 하도변화 모니터링 사업을 통해 수집된 자료를 활용하였다. 국내 109개 하천(한강권역 39개 하천, 낙동강권역 23개 하천, 금강 34개 하천, 섬진강 5개 하천, 영산강 8개 하천)에 대한 자료를 수집하고 분석하여 하상재료관리시스템(Bed Material Management System, BMMS)을 구축하였다. BMMS는 GIS 기반으로 구축된 시스템으로 관리, 표출 및 분석이 가능하며 하상재료의 위치정보, 하상재료 성분비 및 유효경 등 총 11개로 구성되어 있다. 하상재료조사는 시료채취 방법과 표층조사 방법으로 조사하였으며, 시료채취는 체가름 시험과 비중 시험을 이용하였고 표층조사는 BASEGRAIN 프로그램을 이용한 표층 영상분석을 통해 입도분포, 입경가적곡선 등을 나타내었다. 향후 이용자의 편의성을 위한 방안을 모색 중에 있으며, 하천별 하상재료 분석자료를 정기적으로 축척하여 국내 하천의 지역적 특성을 고려한 매개변수 산정 및 최적화에 도움이 될 것이라 판단된다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.1
• /
• pp.7-17
• /
• 2016

The present study experimentally considers dynamic performance of large floating wave-offshore hybrid power generation platform in extreme conditions. In order to evaluate the motion performance of the large floating hybrid power generation platform, 1/50 scaled model was manufactured. A mooring line was also manufactured, and free-decay and static pull-out tests were carried out to check the mooring model. A mooring line table was introduced to satisfy the water depth, and environmental conditions were checked. Motion responses in regular waves were measured and complicated environmental conditions including wave, wind, and current were applied to see the dynamic performance in extreme/survival conditions. Maximum motion and acceleration were judged following the design criteria, and maximum offset and mooring tension were also checked based on the rule. The characteristics of hybrid power generation platform are discussed based on these data.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.47 no.4
• /
• pp.281-289
• /
• 2011

The purpose of this study is to identify the flow resistance of the bottom trawl net. The bottom trawl net being used in the training ship of Chonnam National University was selected as a full-scale net, and model nets such as 1/10, 1/25 and 1/50 of the actual net were made. Total resistance of the net part, the height of the net mouth and the flow resistance of components of the net such as wing, bag and cod-end part was measured, converted into full-scale and compared. Additionally, the model rule of Tauti (1934), which has been most frequently used in fishing net modeling experiments, was applied to interpret flow resistance and scale effect of model experiment was investigated. Presumed that the flow resistance R is $R=kS{\upsilon}^2$ against the flow velocity of each net ${\upsilon}$, resistance coefficient k was calculated by substituting R, ${\upsilon}$ and S of the net. From the result, it was found that k decreases exponentially when u increases which makes $k=c{\upsilon}^{-m}$. Whereas m of each net is ranged between 0.13-0.16 and there was not significant difference between nets. c does not show big difference in 1/10 and 1/25 model and the value itself was relatively bigger than in 1/50 model. The height of the net mouth of 1/25 and 1/50 model net h decreases exponentially according as ${\upsilon}$ increases to make $h=d{\upsilon}^{-n}$. Whereas d and n values were almost same in two nets. Additionally, when resistance of cod-end, wing and bag part in 1/25 and 1/50 model nets, both nets showed big resistance in bag part when flow is 1m/s as more than 60%. Wing and cod-end part showed almost same value or wing part had little bit larger value. On the other hand, when reviewing the reasons why both models showed difference in 1/50 model while c value against the resistance coefficient k did not show big difference in 1/10 and 1/25 model, it is inferred that the difference occurred not from material difference but from the difference in net size according to scale. It was judged that they are the scale effects concomitant to the model experiments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.453-458
• /
• 2016

While the design of weirs requires a scour-considered strategy, research on the analysis of the effectiveness of hydraulic energy dissipaters and design criteria are scarce due to the limited experimental facilities and restraint in the experiment conduction period. The study analyzed the scour dissipation effect of multidirectional dissipaters to improve the scour problems of a weir downstream and suggests design criteria to minimize scour. A hydraulic model experiment was conducted for Nakdong River Hapcheon-Changnyeong Weir and a model in 1/25 of horizontal accumulation and 1/25 of vertical accumulation was produced. The experimental equipment was classified into channels and a flow rate supply and an underwater pump were installed to enable flow at a maximum of 2.0 m3/s. The experimental inflow was 1.3 m3/s, the upstream water level was 0.36 m, downstream water level was 0.24 m, and a cylinder wooden baffle, a dissipater, with a diameter of 0.05 m was made. A 3D scanner was also used for an accurate scour depth comparison for a length change of the baffle before and after installing the baffle. When the baffle was arranged in the shape of a V, the depth of scour decreased by 36% while the scour length decreased by 49% due to flow reduction compared to that before installing the baffle.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.2
• /
• pp.203-211
• /
• 2015

The purpose of this study is to identify the flow resistance of the bottom pair trawl nets. The bottom pair trawl nets being used in fishing vessel (100G/T, 550ps) was selected as a full-scale net, and 1/10, 1/25 and 1/50 of the model nets were made. Converted into the full-scale net by Tauti's modeling rule and Kim's modeling rule, when resistance coefficient k of each net was calculated by substituting into above equation for flow resistance R and wall area of nets S values of each net ${\upsilon}$. Because resistant coefficient k decreases exponentially according as flow velocity ${\upsilon}$ increases to make $k=c{\upsilon}^{-m}$, c and m values of each net were compared. As a result, as the model was smaller, c and m values was smaller in the two rule into standard of 1/10 model value, decrease degree of 1/25 model was almost same in the two rule, decrease degree of 1/50 model was very big in Tauti's modeling rule. Therefore, in the result of experiment, because average of c and m values for similarly 1/10 and 1/25 model were given $c=4.9(kgf{\cdot}s^2/m^4)$ and m=0.45, R (kgf) of bottom pair trawl net could show $R=4.9S{\upsilon}^{1.55}$ using these values. As in the order of cod-end, wing and bag part for 1/25 and 1/50 model net were removed in turn, measured flow resistance of each, converted into the full-scale, total resistance of the net and the resistance of each part net were calculated. The resistance ratio of each part for total net was not same in 1/25 and 1/50 model each other, but average of two nets was perfectly same area ratio of each part as the wing, bag and cod-end part was 43%, 45% and 12%. However, the resistance of each part divided area of the part, calculated the resistance of per unit area, wing and bag part were not big difference each other, while the resistance of cod-end part was very large.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.1
• /
• pp.53-62
• /
• 2016

In recent years, UAV Photogrammetry based on an ultra-light UAS(Unmanned Aerial System) installed with a low-cost compact navigation device and a camera has attracted great attention through fast and accurate acquirement of geo-spatial data. In particular, UAV Photogrammetry do gradually replace the traditional aerial photogrammetry because it is able to produce DEMs(Digital Elevation Models) and Orthophotos rapidly owing to large amounts of high resolution image collection by a low-cost camera and image processing software combined with computer vision technique. With these advantages, UAV-Photogrammetry has therefore been applying to a large scale mapping and cadastral surveying that require accurate position information. This paper presents experimental results of an accuracy performance test with images of 4cm GSD from a fixed wing UAS to demarcate parcel boundaries in agricultural area. Consequently, the accuracy of boundary point extracted from UAS orthoimage has shown less than 8cm compared with that of terrestrial cadastral surveying. This means that UAV images satisfy the tolerance limit of distance error in cadastral surveying for the scale of 1: 500. And also, the area deviation is negligible small, about 0.2%(3.3m²), against true area of 1,969m² by cadastral surveying. UAV-Photogrammetry is therefore as a promising technology to demarcate parcel boundaries.