• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.756-759
• /
• 2003

It is increasing the interest on the comfortable dwelling environment and the efforts to solve the problem of the floor impact noise in apartment houses have been realized, as a result numerous products have been made. The purpose of this study is to investigate the sound insulation performances according to foaming rate of floor impact noise insulators and flooring coverings in Mock-up Test Room. The test results of impact insulation performance for each floor impact noise insulators is that double structure of insulator is excel than one in low-middle frequency band and as foaming rate go up, the sound insulation performance is improved.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1878-1882
• /
• 2010

이 연구는 제방의 침투 수리모형 실험의 자료를 이용해 안전도 평가 지표 선정을 위한 자료 제공하고 향후 수행할 침투 수치모의에 필요한 보정 및 검증 자료를 확보할 목적으로 수행하였다. 제방 축조 현장에서 구한 제체재료를 사용하여 실험실에 제방축소모형을 $14.5m{\times}0.6m{\times}1.6 m$의 수조 내부에 제작하였다. 제방 사면의 경사는 1:2, 제방 저면의 길이는 4.60 m, 제방 상부의 길이는 2.40 m, 제체의 높이는 0.55 m로 제작하였다. 모형제방은 제방축조 방법과 유사하게 다짐을 하기위해 흙을 쌓으면서 0.20 m 높이 마다 다짐을 실시하였다. 다짐방법은 고무망치를 이용한 층다짐을 하였다. 들밀도실험에 의한 제방모형의 건조단위중량과 다짐도는 각각 1.71g/cm3, 93%로 측정되었다. 홍수위 증가에 따른 비정상 상태의 침투수위 측정을 수행하였다. 수리모형실험은 약 8일 동안 수행하였다. 침윤선의 수두와 위압계별 수두는 상류쪽(제외지 사면)부터 증가하기 시작하며 하류쪽(제내지 사면)로 확장됨을 알 수 있으며, 실험 초기에는 상류쪽의 수두가 급격히 상승하지만, 점차 상승속도가 둔화되는 등의 일반적인 경향이 나타나고 있음을 확인할 수 있다. 실험시작 18시간 경과 후부터 제외지 사면 하단부에서 유출이 발생하였으며, 21시간 경과 후부터는 상류부의 수두가 안정되는 현상이 나타났다. 측정된 침투수위의 변화 양상은 향후 수치모형을 이용한 침투해석의 검보정 자료로 활용할 계획이다.

• Proceedings of the Korea Contents Association Conference
• /
• 2011.05a
• /
• pp.465-466
• /
• 2011

이 연구는 일본식 배수공이 설치된 제방의 침투 흐름을 비정상 상태로 SEEP/W 모형을 사용하여 해석하고 모형의 적용성을 평가하기 위해 수행하였다. 수치모형의 적용성 평가를 위해 비정상 상태로 제방 침투에 대한 수리모형실험을 수행하였다. 제체 재료는 경상북도 구미시에 위치한 해평천의 제방 건설 현장의 재료를 사용하였고 일본식배수공은 굵은 골재와 부직포를 사용하여 실험실에 제방 축소 모형을 수조 내부에 제작하였다. 모형제방은 제방축조 방법과 유사하게 다짐을 하기 위해 흙을 쌓으면서 0.20 m 높이마다 다짐을 실시하였다. 다짐방법은 고무망치를 이용한 층다짐을 하였다. 제방 제외지에 0.55 cm/min의 속도로 수위를 증가하여 15분 간격으로 각 0.3 m, 0.4 m, 0.5 m 수위에 따른 비정상 상태의 위압계 측정을 수행하였다. SEEP/W 모형의 매개변수는 투수계수와 입도분포도, 불포화 함수특성곡선(값을 산정하기 어려움)이 있으며, 각 매개변수에 대한 민감도 분석을 수행하였다. SEEP/W 모형의 모의 결과는 수리모형실험 결과와 비교적 잘 일치함을 알 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.83-90
• /
• 2007

This study aimed at examining the effect of rooms decorated by eco-friendly finishing materials in a newly built wooden house on the emission of indoor air pollutions. According to the results of examination, the levels of benzene, toluene, ethyl benzene and styrene in all the rooms were below criteria of indoor air quality of newly-constructed houses. The levels of natural volatile organic compounds (NVOC), anthropogenic volatile organic compounds (AVOC) and total volatile organic compounds (TVOC) in room R1-1 which had Hwangto wall covering on it, were relatively higher than in room phytoncide wallpaper covered R2-1. The room R2-2 where bamboo charcoal panel used for wall covering showed higher level of AVOC compared to the room R1-2. Living room R1-3 was found to contain less TVOC, compared to the other four rooms. In addition, the ratio of NVOC to TVOC in the living room was higher than in the other rooms. This seemed to be attributed to Cryptomeria Japonica the living room finished material.

• The Journal of Engineering Geology
• /
• v.4 no.3
• /
• pp.269-281
• /
• 1994

Microscopic study and X-ray diffraction analysis were carried out to find out rock type, tock forming minerals; and weathering characteristics of rocks at the constructing site of the churyong Tunnel, Kyongju-Gun, Kyongbuk. Seismic velocity and compressional strength were measured to evaluate mechanical properties of rock. The rock of the study area is Jurassic tuff consisting of clay minerals, crystals of quartz and feldspar, fragments of volcanic rocks and shale. Fresh tuff has compressional strength of about $443kg/\textrm{cm}^2$ and seismic velocity of about 3680m/sec in average. It is classified as soft rock. Rock fragment within tuff is andesite and it has compressional strength of about $2500kg/\textrm{cm}^2$ and seismic velocity of about 4340m/sec in average. It is classified as hard rock. A good linear relationship is found between compressional streangth and seismic velocity in both laboratory sample and in-situ rocks. Laboratory samples has seismic velocities faster about 1.5km/sec than those in-situ rocks. It is interpreted that joints, fractures, and water content in the in-situ rocks result in decreas of seismic velocity. As Tuff has more than 50% of clay minerals in matrix and shale fragments, it absorbs water easily in atmospheric condition. Therefore, though the rock in the study area is medium hard rock before weathering, it is weathered very easily in the case of exposure to natural environment, comparing with other rock.

• Korean Journal of Ichthyology
• /
• v.4 no.1
• /
• pp.1-13
• /
• 1992

The gobiid fish, Luciogobius guttalus Gill has an anguilliform with some blackish and reddish brown color in life. It grows up to 90mm in total length. The specimens have been collected from several localities in the southern parts of Korea and Hokkaido, Japan. During the ebb tide, the fish was found in high level of intertidal zone exposed to the air among pebbles in the hollows and slopes of rocks. There are also some other small gobiid fishes comprising 3 species of relative gobies and 1 species of blennioid fish. A total of 5 egg masses were collected from the coast of Haeundae in April to May 1990. Each egg mass was deposited in one layer on the underside of a stone embedded in pebbles and guarded by the male parent. The eggs are club-shaped ranging from 2.71 to 2.80mm in long axis and from 0.65 to 0.74mm in short axis. The eggs were hatched in 98 hours after incubatied at the temperature varying from 19.5 to $25.5^{\circ}C$The newly hatched larvae were from 3.85 to 4.00mm in total length with 35~36 myomeres. In eleven days after hatching, total length reached 5.50mm. The part of the fin-fold of the future dorsal and anal fins became high. In sixteen days after hatching, the lavae averaged 6.20mm in total length and the caudal notochord flex at $45^{\circ}$. The larvae reached the juvenile stage in 48~50 days after hatching and attained 12.80~14.00mm in total length, and all fin-rays was formed. Ossification of the cranium took place at 5.50mm of mean total length in parasphenoid and basioccipital. Ossification of the visceral skeleton occurred in areas where active movements of bones are required, notalbly in the parts of feeding and respiration. Vertebrae began to develop from the anterior end to ossify posteriorly. Neural and haemal spines of vertebrae ossified always prior to the corresponding centra. When larvae reached to about 6.60mm in mean total length (17~18 days after hatching), jaw bones were more repidly ossified than vertebrae and cranium. Ossification of all bones nearly completed when the larvae reached to 13.40mm in mean total length (47~50 days after hatching).