• Composites Research
• /
• v.28 no.4
• /
• pp.204-211
• /
• 2015

This paper presents a theory related to a two-dimensional linear cross-sectional analysis, recovery relationship and a one-dimensional nonlinear beam analysis for composite wing structure with initial twist. Using VABS including a related theory, the design process of the composite rotor blade has been described. Cross-sectional analysis was performed at cutting point including all the details of geometry and material. Stiffness matrix and mass matrix were linked to each section to make 1D beam model. The 3D strain distributions within the structure were recovered based on the global behavior of the 1D beam analysis and visualize numerical results.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.3
• /
• pp.201-208
• /
• 2012

In this paper, a series of experiment is performed for a scaled hovering rotor in a semi-anechoic chamber and the results are compared to the noise spectra predicted by using Lowson's loading noise equation and FW-H equation. It was founded that the sound directivity pattern for both experiments and predictions are similar in their trend. Meanwhile the FW-H equation showed better agreement with experiments in the near-field noise spectra, but at the far-field the Lowson's equation performed better. The discrete noise are known to be proportional to the loading on the blades, which can be controlled by collective pitch angle of the blades. It was founded that the predicted spectra with FW-H equation come close to the measured noise spectra in low collective pitch, but in high collective pitch angles the Lowson's equation be more reliable.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.8
• /
• pp.597-609
• /
• 2020

These days, the coaxial rotor system is used for various purposes like UAVs, Mars exploration helicopters, and the next-generation high-speed rotorcraft. A number of research projects on aerodynamic performance of rotor systems, including the coaxial configuration have been made previously. On the contrary, research on rotor blade deformation has been mainly carried out regarding the single rotor system, where such effort has not been enough on the coaxial system. Nonetheless, in case of the coaxial system, blade deformation analysis is much more important because of the complex air flow around the rotors, and that the distance between the two rotors is a key factor affects aerodynamic performance of the entire system. For these reasons, an experimental study on rotor blade deformation of the coaxial system was conducted using the Stereo Pattern Recognition(SPR) technique, one of the state-of-the-art of photogrammetry method. In this research, a small-scale coaxial rotor test stand designed by Korea Aerospace Research Institute(KARI) was used. With the same test stand, performance of the coaxial configuration had been studied before the experimental study on blade deformation, in order to find the relation between performance and blade deformation of the rotor system. Results of the performance test and the deformation study are presented in this article.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.1
• /
• pp.31-37
• /
• 2017

In this paper, computation results of reducible modeling, stress recovery and energy release rate were compared with the results of VABS, Virtual Crack Closure Technique. The result of stress recovery analysis for 1-D model including the stiffness matrix is compared with stress results of three-dimensional 3-D FEM. Energy release rate of composite beam with longitudinal cracks is calculated and compare verifications of numerical analysis results of 3-D FEM and VABS. The procedure of calculating energy release rate through dimensional reduction and stress recovery is intended to be efficient and be utilized in the life-cycle of high-altitude uav's wing, wind blades and tilt rotor blade.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.3
• /
• pp.301-306
• /
• 2009

In this study a 3-component rotating balance, which is designed to measure the thrust (Fz) and two moment components (Mx, My) simultaneously for a rotor test jig, is designed and its performance is validated experimentally. The low voltage signal from the strain gages mounted on the balance is amplified with a rotating amplifier, which is then fed through a slip-ring unit into the data acquisition system. In order to validate the accuracy of the calibration matrix obtained from a static calibration test, an additional reaction type balance is used to measure the thrust from a model rotor simultaneously, and shows very good result. Finally, the expanded uncertainty value, which is obtained from ISO method is estimated to be $2.82\times10^{-1}$, and the balance turns out to be reliable.

• 한국항공운항학회:학술대회논문집
• /
• 2007.06a
• /
• pp.85-88
• /
• 2007

• Current Industrial and Technological Trends in Aerospace
• /
• v.5 no.1
• /
• pp.75-92
• /
• 2007

2002년 프론티어사업의 일환으로서, 10년간 1200억의 예산으로 미래형 신개념비행체 기술개발사업을 시작한 스마트무인기사업은, $2002{\sim}2003$년 수행한 개념연구를 통해 미래형 신개념 고속 수직이착륙 항공기 개념으로서 틸트로터 개념을 선정하고 이의 개발에 매진하고 있다. 사업단에서는 우선, 항공 선진국에서 지난 반세기 동안 시행한 다양한 비행체 개념연구결과에 대해 자체적인 비교 분석 및 국제공동 연구를 근간으로하여, 당시 틸트로터에 필적하는 가능성을 보였던 스탑트로터(보잉사), 복합자이로콥터(카터콥터사) 개념이 아닌, 틸트로터 비행체의 기술개발을 결정하게 되었다. 각각의 비행체 개념이 갖는 위험성과 도전성, 그리고 소요기술, 설계특성, 개발 위험도 등에 대한 면밀한 분석을 기초로 한 사업단의 체계적 의사결정은 주효했다. 스탑트로터개념은 비행시험의 잇단 실패와 지연/잠정 중단사태가 이어졌고, 복합자이로콥터 또한 잇단 비행사고로 2002년 기록한 148kts를 능가하는 고속성능 시현에 지금까지 실패함으로써, 실용화 가능한 고속수직이착륙기로서의 검증을 위해서는 해결해야할 기술적 과제가 많이 남아있음을 보여주고 있다. 반면, 틸트로터 개념의 경우 V-22의 설계 수정형에 대한 성공적인 비행시험완료 및 인증획득으로 전면양산승인이 2005년 결정되어 458대가 (미해병대(360), 해군(48), 공군(50)) 납품될 예정이고, 2010년 인증획득을 목표로 민수용으로 개발중인 BA609의 순조로운 비행시험진행, 무인기로 개발된 Eagle Eye 기술시현기의 비행 시험성공과 2003년 미 해양경찰청으로부터 Deep Water 프로그램의 장거리 순찰임무 주력기종 선정과 같이 군용, 상용, 무인용 고속 수직이착륙 시장의 전 방위적 진입이 현실화되고 있다. 이에 따라 항공업계의 반응은 2가지 방향으로 나뉘고 있다. 하나는 유럽의 ERICA 프로그램과 같이 틸트로터 기술 개발을 서두르자고 주장하는 방향이고, 다른 하나는 시콜스키의 X2 프로그램과 같이 틸트로터와는 차별화된 독자적인 고속 수 직이착륙 비행체 개념 개발을 시도하는 것이다. 이러한 배경으로 국내 독자적인 기술력으로 지난해까지 일구어낸 성공적인 스마트무인기 상세설계 종료 및 축소형 비행체 전환비행성공은 그 의의가 매우 크다고 할 수 있다. 본 논문은 틸트로터 개발사를 통해, 신개념 비행체 개발의 어려움과 교훈을 알아보고, 세계에서 2번째로 틸트로터 기술을 개발하고 있는 스마트무인기 사업의 현황과 기술적 특징 및 의의의 정리, 그리고 틸트로터의 대안으로 진행중인 새로운 고속 VTOL 비행체 연구현황에 대한 소개 와 간단한 기술적 평가를 포함시켰다.

• Aerospace Engineering and Technology
• /
• v.2 no.2
• /
• pp.33-44
• /
• 2003

This paper describes the design and analysis technology of composite flexure and composite paddle-type blade which are all key technologies on hingeless rotor system. Through replacing the existing metal or engineering plastic flexure part with composite part, Several required structural analysis were accomplished, which are static analysis by using NASTRAN and dynamic analysis by using FLIGHTLAB. The dynamic characteristics of composite hingeless hub attached with paddle-type blade was also investigated. Further more, small-scaled paddle-type blade was designed using froude scaled properties of existing full size blade. Through this design procedure of composite paddle-type blade, the structural design method was achieved. These results will be applied to accomplishing current project named as "the development of next-generation helicopter rotor system."

• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.240-247
• /
• 2006

Tilt rotor aircraft is a multi-configuration airplane which has three independent flight modes; helicopter, conversion, and aiplane. The control surface mixer resign is reqctired to generate and distribute efficient control forces and moments in each flight mode. In the conversion mode, the thrust vector is changed from helicopter mode to airplane, therefore the thrust vector makes undesired forces and moments which affect on pitch, roll and yaw dynamics. This paper describes the design results of control surface mixer design which minimize the undesired forces and moments due to nacelles tilting angle change for 4O% scaled model.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.1
• /
• pp.1-9
• /
• 2014

The present study was conducted by using fast-responding PSP technique to measure the surface pressure on a small-scale rotor blade in hover. Also, the study was performed to verify the accuracy and investigate its possibility of PSP application for rotor blade pressure measurement. Pulsed laser which has 532 nm wavelength was used as a light source. Lifetime measurement technique was applied. Also, the coated paint on a rotor blade was porous PSP which has faster response time than conventional PSP. The blades had NACA0012 airfoils. The length of rotor blade was 340 mm and chord was 40 mm with rectangular shape 1 set, and 4 sets had several tip sweepback angles. The measured results qualitatively showed that the upper surface pressure decreases with increasing the collective pitch angle. Quantitative pressure coefficients of PSP results were higher approximately 0.4 to 0.7 than the pressure tap data of the NASA experiment.