Design of Control Mixer for 40% Scaled Smart UAV

스마트무인기 축소모형의 조종면 혼합기 설계

  • 강영신 (스마트무인기기술개발사업단 체계종합실) ;
  • 박범진 (스마트무인기기술개발사업단 체계종합실) ;
  • 유창선 (스마트무인기기술개발사업단 체계종합실)
  • Published : 2006.11.01

Abstract

Tilt rotor aircraft is a multi-configuration airplane which has three independent flight modes; helicopter, conversion, and aiplane. The control surface mixer resign is reqctired to generate and distribute efficient control forces and moments in each flight mode. In the conversion mode, the thrust vector is changed from helicopter mode to airplane, therefore the thrust vector makes undesired forces and moments which affect on pitch, roll and yaw dynamics. This paper describes the design results of control surface mixer design which minimize the undesired forces and moments due to nacelles tilting angle change for 4O% scaled model.

틸트로터 항공기는 회전익모드, 천이모드, 고정익모드를 동시에 갖는 복합 형상 항공기 이다. 각 비행모드에서 최적의 상태로 비행하기위해서는 조종면 변위를 적절히 분배하고 조합하는 조종면의 혼합기설계가 요구된다. 회전익과 고정익을 전환할 수 있도록 설계돤 천이모드는 나셀각의 변경에 따른 추력선이 변경되고 이로 인해 천이모드에서 피치, 롤, 요축에 대해 불필요한 힘과 모멘트를 발생시킨다. 본 논문에서는 나셀의 틸팅각 변화에 따라 발생하는 힘과 모멘트를 다른 조종면을 통해 적절히 조절하여 일관된 항공기의 운동이 발생하도록 하는 스마트무인기 40% 축소모델에 대한 조종면 혼합기설계에 대해 서술하였다.

Keywords