• The Journal of the Acoustical Society of Korea
• /
• v.20 no.3
• /
• pp.91-97
• /
• 2001

Since the new field information of target signal is important in the development and verification of active sonar system, experimental method and simulation technique are widely used in order to analyze the detail characteristics of target scattered echoes. Therefore, in this paper, the scale target experiment is performed to develope and Improve the target signal simulation model. Since the experimental results show that the specular reflection is the major component among scattering mechanisms, the target signal simulation model based on the Geometric Optics Theory (GOT) is developed. Complex target is separated into simple shapes, known as canonical shape. The contribution from individual canonical shapes are summed with proper phase and amplitude to produce the target strength of the whole complex body. Simulated target signal is compared with the experimental results and discussed.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.473-476
• /
• 1998

본 연구에서는 GAT(Geometry Acoustic Theory)를 이용한 표적신호 합성모델의 이론적 배경을 제시하고, 수치모델의 결과를 음향수조에서 축소표적 실험자료 결과와 비교한다. GAT에 의한 표적신호 합성모델은 3차원 해양환경에서 음원과 표적에 의한 음장을 적절히 묘사할 뿐만 아니라 표적 형상에 의한 효과를 정밀하게 계산함으로써 고 정밀도의 표적신호 합성을 가능하게 한다.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.4
• /
• pp.93-100
• /
• 2000

Target signal feature parameters are very important to classify target by active sonar. Two highly correlated broad band pulses separated by time T have a time separation pitch(TSP) of 1/T Hz which is equal to the trough-to-trough or peak-to-peak spacing of its spectrum. In this study, TSP informations which represent feature of each target signal were effectively extracted by the FFT. The extracted TSP feature parameters were also applied to the pattern recognition algorithm to classify target and to analyze their properties.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.3
• /
• pp.174-183
• /
• 2014

When a active sonar signal is transmitted and returned back from a target, it has been distorted by various properties of acoustic channel such as multipath arrivals. And signals have been appeared to be different form by target position and attitude. Therefore, we simulated the target echo signal using 3 dimensional target model include reflects target features. In this paper, we develop components form of a simulated target model is made up equally spaced highlight points, and each part of the target consists of shape function. We can simulate a target echo signal and Target strength (TS) according to wave incident angle. To verify, we made small scale target in kit form and we had got underwater target signal for comparing simulation result in water tank.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.434-437
• /
• 2011

차세대 지능적 무기체계의 자동화를 목표로 SAR(Synthetic Aperture Radar) 영상 신호를 이용한 표적 인식률 향상을 위한 여러가지 방법들이 제안되어 왔다. 기존의 연구들은 SAR 영상의 고차원 특징을 그대로 사용했기 때문에 표적 인식의 성능저하가 있었다. 본 연구에서는 정보 획득 거리가 길고, 날씨에 제약이 없이 전천후 작전 운용이 가능하도록 레이더의 특징과 고해상도 영상을 결합한 SAR 이미지를 이용한 표적 인식률 향상 방법을 제안한다. 효과적인 표적 인식을 하기위해 고차원의 특징벡터를 저차원의 특징벡터로 축소하는 PCA(Principal Component Analysis)를 기반으로 하는 SVM(Support Vector Machine)을 사용한 표적 인식 기법을 사용하였고, PCA 기반의 SVM 분류기를 이용한 표적 인식이 SVM 만을 사용한 표적 인식보다 향상된 성능을 보인 것을 확인하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.8
• /
• pp.758-765
• /
• 2016

This paper proposes a novel method for the recognition of the inverse synthetic aperture radar(ISAR) image of multiple targets flying in formation. Rather than separating the ISAR image of each target, the proposed method combines an ISAR image obtained by fusing the ISAR images in the training database. Fusion is conducted by optimizing the non-linear problem whose parameters are the aspect angle and the target location. Assuming that the aspect angle is properly estimated, the proposed method estimates the number of the targets and their locations by optimizing the template matching using PSO. In simulations using the F-16 scale model, the efficiency of the proposed method was demonstrated by yielding the ISAR image identical to that of targets in formation.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.6
• /
• pp.12-18
• /
• 2010

Automatic Target Detection (ATD) systems that use forward-looking infrared (FLIR) consists of three stages. preprocessing, detection, and clutter rejection. All potential targets are extracted in preprocessing and detection stages. But, this results in a high false alarm rates. To reduce false alarm rates of ATD system, true targets are extracted in the clutter rejection stage. This paper focuses on clutter rejection stage. This paper presents a new clutter rejection technique using PCA features and stochastic features of clutters and targets. PCA features are obtained from Euclidian distances using which potential targets are projected to reduced eigenspace selected from target eigenvectors. CV is used for calculating stochastic features of edges in targets and clutters images. To distinguish between target and clutter, LDA (Linear Discriminant Analysis) is applied. The experimental results show that the proposed algorithm accurately classify clutters with a low false rate compared to PCA method or CV method

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10B
• /
• pp.1111-1116
• /
• 2009

In this paper, we discuss distortion-tolerant pattern recognition using computational integral imaging reconstruction. Three-dimensional object information is captured by the integral imaging pick-up process. The captured information is numerically reconstructed at arbitrary depth-levels by averaging the corresponding pixels. We apply Fisher linear discriminant analysis combined with principal component analysis to computationally reconstructed images for the distortion-tolerant recognition. Fisher linear discriminant analysis maximizes the discrimination capability between classes and principal component analysis reduces the dimensionality with the minimum mean squared errors between the original and the restored images. The presented methods provide the promising results for the classification of out-of-plane rotated objects.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.3
• /
• pp.219-230
• /
• 2022

In implementing a robust automatic target recognition(ATR) system with synthetic aperture radar(SAR) imagery, one of the most important issues is accurate classification of target variants, which are the same targets with different serial numbers, configurations and versions, etc. In this paper, a deep learning network with channel attention modules is proposed to cope with the recognition problem for target variants based on the previous research findings that the channel attention mechanism selectively emphasizes the useful features for target recognition. Different from other existing attention methods, this paper employs the channel attention modules without dimensionality reduction along the channel direction from which direct correspondence between feature map channels can be preserved and the features valuable for recognizing SAR target variants can be effectively derived. Experiments with the public benchmark dataset demonstrate that the proposed scheme is superior to the network with other existing channel attention modules.

• Journal of the military operations research society of Korea
• /
• v.36 no.2
• /
• pp.11-24
• /
• 2010

Quick precision-strike capability of the artillery will be an important factor in modern and future war and it's represented by NCW and EBO. This study is based on artillery which has time limitation of firing, such as artillery which hides when not firing, and modeling various situations to decide firing order and who to shoot. The main purpose of this study is to suggest a mathematical programming model and a genetic algorithm which satisfies the limitation of firing time. The objective function is to minimize the total firing time to spend. The results of the suggested algorithm quickly gives a best solution for a large scale field artillery targeting problems.