• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.2
• /
• pp.140-148
• /
• 2002

Anisotropic elastic constants of Zr-2.5Nb pressure tube materials were determined by a high temperature resonant ultrasound spectroscopy (RUS). The resonant frequencies were measured using alumina wave-guides and wide band ultrasonic transducers in a small furnace. The rectangular parallelepiped specimens were fabricated along with the axial, radial and circumferential direction of the pressure tube. A nine elastic stiffness tensor for orthotropic symmetry was determined in the range of room temperature ${\sim}500^{\circ}C$. As the temperature increases, the elastic constant tensor, cij gradually decreases. Higher elastic constants along the transverse direction compared to those along the axial or radial direction are similar to the case of Young's modulus or shear modulus. A crossing of shear elastic constants along axial direction and radial direction was observed near $150^{\circ}C$. This fact corresponds to the crossing of c44 and c66 of single crystal zirconium.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.183.2-183.2
• /
• 2005

• The Journal of the Korea Contents Association
• /
• v.18 no.11
• /
• pp.643-654
• /
• 2018

In order to understand and manage traffic flows in urban areas in the past, a variety of traffic engineering theoretical indicators such as intersection lag and highway speed have been applied. However, these theories and indicators have been developed under the constraints of traffic engineering research before the construction of intelligent transportation system. Since the ATIS system currently exists, it is necessary to introduce a separate traffic engineering technology that utilizes the data. In this paper, it is aimed to confirm whether it is applicable to intermittent flow (approach road, intersection, control group, main road axis) by using 'congestion intensity' which is already used in traffic engineering field. The results of this study are as follows: (1) The traffic signal improvement effect of urban road access road, intersection road, control group, Two verification studies were performed to verify the derived congestion intensity index. (1) verification of congestion intensity threshold value analysis and (2) crossing improvement using the congestion intensity. Through verification, it was confirmed that it is possible to apply the congestion intensity in the inter - city intermittent flow using the 5 - minute unit speed data so as to be able to escape from the existing traffic signal operation management which is past passive and manpower limit.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.3
• /
• pp.183-188
• /
• 2010

In this paper we propose a detection method of the medial axis of the continuous stripes on the LoG scale-space. Our method detects the medial axis of continuous stripes iteratively by varying the scale of LoG operator. Small-scale LoG operator detects two +/- pole pairs centered on the edge positions of stripe by the zero-crossing detection. The more increase the scale of LoG scale-space, the more close two poles to the medial axis of stripe. The medial axis of continuous stripe is the position where two poles is overlapped. The proposed method detected robustly the medial axis of continuous stripes stronger than the thinning methods used to binary image.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.2
• /
• pp.115-120
• /
• 1998

This paper presents a modeling of a synchronous machine infinite bus system of which not only seperated saturation effect but also cross magnetization effect of the saturated generator is included for the more precise analysis of the system. In the process of reforming the flux linkage equations of the state equations which have generator saturation effects, the d-axis coordinated system of a generator is fixed that the d-axis proceeds the q-axis in $90^{\circ}$ to accord with the generally accepted generator model used before. The simulation results show that cross magnetization has a very important effect to the more precise eigenvalue analysis of steady state stability.bility.

• Nuclear Engineering and Technology
• /
• v.27 no.4
• /
• pp.491-502
• /
• 1995

In accurate prediction of cross-flow based on detailed knowledge of the velocity field in subchannels of a nuclear fuel assembly is of importance in nuclear fuel performance analysis. In this study, the low-Reynolds number k-$\varepsilon$ turbulence model has been adopted in too adjacent subchannels with cross-flow. The secondary flow is accurately estimated by the anisotropic algebraic Reynolds stress model. This model was numerically calculated by the finite element method and has been verified successfully through comparison with existing experimental data. Finally, with the numerical analysis of the velocity Held in such subchannel domain, an analytical correlation of the lateral loss coefficient is obtained to predict the cross-flow rate in subchannel analysis codes. The correlation is expressed as a function of the ratio of the lateral How velocity to the donor subchannel axial velocity, recipient channel Reynolds number and pitch-to-diameter.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.6
• /
• pp.1156-1162
• /
• 1992

The effect of aspect ratio on the flow characteristics of elliptic jets was experimentally investigated. The flow characteristics of sharp-edged elliptic nozzles with aspect ratio of 1 (round nozzle), 2 and 4 were measured by using a 3-D LDV system along the major and minor axis at X/De = 2, 3, 5, 7 and along the centerline up to X/De = 14. At each measurement point mean velocites, turbulent intensities, skewness of three orthogonal velocity components, and Reynolds shear stress were obtained. The Reynolds number based on the nozzle exit velocity and nozzle equivalent diameter(De) was about 4 * 10$^{4}$. Difference in the spreading rate along the major and minor axis was remarkable. The jet half width along the major axis decreased at first and then increased again with going downstream. But the jet width along the minor axis increased steadly. The elliptic jet of AR = 2 had two switching points within the measurement range, while that of AR = 4 had only one. (AAA) : The elliptic jet of AR = 2 showed larger velocity decay rate than that of AR = 1 and AR = 4. The effect of aspect ratio on the flow characteristics of elliptic jets was dominant in the near jet regions of X/De < 7, and the skewness and Reynolds shear stress had quite different distribution depending on the aspect ratio of the elliptic nozzle.

• Journal of Korean Society of Transportation
• /
• v.20 no.6
• /
• pp.31-43
• /
• 2002

Traffic signal control methods are suggested to improve the operational effectiveness of COSMOS system in Seoul. First. a method that improves progression of the corridor traffic flow within a common sub-area was explored. Applying this method, both frequency and magnitude of offset transition were reduced as compared to the existing method. In addition, the level of connection among neighboring corridors increased by applying the method, thus the qualify of progression was also improved. Second, a practical guideline on signal phase design was proposed to improve the efficiency of actuated operations for the left-turn movement. Last, a method for estimating optimal queue length parameters was surveyed and evaluated. An evaluation study was performed for the suggested methods through both field and simulation studies. Results showed that the proposed methods gave better performance than the existing methods. It is expected that the use of proposed methods can improve operational performance of COSMOS.

• Journal of Korean Society of Transportation
• /
• v.17 no.2
• /
• pp.127-135
• /
• 1999

Most existing progression bandwidth models maximize the single or multi weighted sum of bandwidths in the both directions to improve traffic mobility on an arterial, but they cannot be applied to general networks. Even though a few models formulating a looped network problem cannot be applied to networks have not loops. Also they have some defects in optimizing phase sequences. Therefore, the objective of this study is to develope a mathematical formulation of the synchronization problem for a general traffic network. The goal is achieved successfully by introducing the signal phasing for each movement and expanding the mixed integer linear programming of MAXBAND. The experiments indicate that the proposed model can formulate the general traffic network problem mere efficiently than any other model. In conclusion, this model may optimize signal time to smooth progression in the general networks.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.902-906
• /
• 2008

The linear motors are easily affected by load disturbance, force ripple, friction, and parameter variations because there is no mechanical transmission to reduce the effects of model uncertainties and external disturbance. For highspeed/high-accuracy position control of a linear-motor-driven two axes, a nonlinear adaptive controller including a cross-coupling algorithm is designed in this paper. The nonlinear effects such as friction and force ripple are estimated and compensated. An enhanced approach for cross-coupling algorithm is proposed to effectively improve the biaxial contour accuracy with the closed-loop stability. The proposed controller is evaluated through the computer simulations.