• Applied Chemistry for Engineering
• /
• v.19 no.1
• /
• pp.98-104
• /
• 2008

This research was performed to evaluate the extraction characteristics of heavy metals for soil washing of mine tailings-contaminated soil according to particle size distribution and the chemical distributional existence of the metals. As the soil particle size was decreased, the extracted concentrations of heavy metals was increased except Fe and Mn. Most of all heavy metals were extracted within 6 h by soil washing with 0.05 M EDTA. Extraction efficiency of metals was decreased for Pb, Cu, and Zn with decreasing of particle size. Significant difference was not observed in extraction efficiency for Cd according to particle size distribution. Extraction efficiency for Cd was the highest as 86~91%, while the lowest as 5~14% for Fe. Most metals of the soil without soil washing was distributed as reducible, oxidizable, and residual fractions. Pb, Zn, and Cd existed as reducible (Fe/Mn oxide) and residual fractions and Cu existed as oxidizable and residual fractions after soil washing treatment with 0.05 M EDTA. As the soil particle size was decreased, residual fraction was increased for Pb and Cu. About 90% of reducible fraction in Pb, Zn, and Cd was removed by soil washing with 0.05 M EDTA. As the results, it was founded that soil particle size was the important parameter to effect on distributional fraction and extraction efficiency of metals in mine tailings-contaminated soil.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10b
• /
• pp.184-186
• /
• 2001

본 논문은 고유명사를 활용하여 특정 정보를 좀더 효율적으로 추출하기 위한 연구이며, Named Entity의 한 범주인 사람 이름에 대하여 어휘 사전이나 실마리 사전의 사용 없이 초기에 주어지는 몇 개의 인칭 명사들을 태그가 부착되지 않은 코퍼스에 적용시켜 고유명사 추출을 위한 패턴을 학습하고, 그 패턴을 적용하여 새로운 고유명사를 생성해 내는 작업을 통해 인칭 명사들을 효율적으로 추출할 수 있는 방법을 제안한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07b
• /
• pp.43-45
• /
• 2005

XML 스키마의 수가 급증함에 따라 동일한 도메인에 속하는 유사한 스키마를 통합하는 방법에 대한 관심이 증가하고 있다. 일반적으로 XML 스키마 통합 과정은 스키마 클러스터링과 통합 스키마 추출의 두 단계로 구성된다. 본 논문에서는 통합 스키마의 추출을 위한 효율적인 방법을 제안한다. 제안된 방법은 공통 구조 추출, 스키마 통합, 그리고 최적화의 세 단계로 이루어진다. 실험결과, 제안된 방법은 처리시간 및 정확도 측면에서 우수란 결과를 보였다.

• Journal of KIISE:Software and Applications
• /
• v.27 no.11
• /
• pp.1082-1087
• /
• 2000

신경회로망 구조의 정제(精製)는 회로망의 일반화능력이나 효율성의 관점에서 중요한 문제이다. 본 논문에서는 feed-forward neural networks로부터 은닉지식을 추출하는 방법을 사용하여 네트워크 재구성을 통한 정제방법을 제안한다. 먼저, 효율적인 if-then rule 추출방법을 제시하고 그 추출된 룰들을 사용하여 룰기반 네트워크로 변환하는 과정을 보여준다. 생성된 룰기반 네트워크 fully connected network에 비하여 상당히 축소된 연결 복잡도를 가지게 되며 일반적으로 더 우수한 일반화능력을 가지게 된다. 본 연구는 도메인 지식이 없이 데이타만 사용하여 어떻게 정제된 룰기반 신경망회로를 생성하고 있는가를 보여준다. 도메인 데이타들에 대한 실험결과도 제시하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.4
• /
• pp.91-96
• /
• 2007

The light extraction efficiency in GaN-on-sapphire LEDs based on a simple model was analyzed qualitatively. The light extraction efficiency in the LEDs is simulated numerically by using ray tracing method. In the present study, the extraction efficiency was simulated on flat LED and PSS(patterned sapphire substrate) LED. The role of the patterned sapphire substrate in PSS LED are analyzed and discussed. And, the effects of reflectance on flat LED and PSS LED were investigated. This analysis of simulation results provide a numeric figure for the extraction efficiency of LEDs and are helpful in the design of high brightness GaN LEDs.

• Korean Journal of Optics and Photonics
• /
• v.14 no.2
• /
• pp.122-129
• /
• 2003

In the case of a AIGalnP/GaP system rectangular parallelepiped high brightness LED which has side walls etched to be slanted off the vertical direction, we have studied the effects of lossy electrodes and material absorption and etching depth and angle of side walls on its light extraction efficiency. If LEDs have no electrodes, in order to obtain an 80％ light extraction efficiency of a TIP (truncated inverted pyramid) LED, the side-etched LEDs should have an etching angle of 22$^{\circ}$~45$^{\circ}$ and an etching depth of 8~17% of a dice height and an absorption coefficient less than 1 $cm^{-1}$ / In case of etching depth of 16~39% of a dice height, we can obtain a 90% light extraction efficiency of a TIP LED. But when LEDs have two electrodes and no absorption loss, in order to obtain an 80％ light extraction efficiency of a TIP LEBs, the side-etched LEDs should have an etching angle of 25$^{\circ}$-45$^{\circ}$ and an etching depth of 30～36% of a dice height. In case of etching depth of 57~71％ of a dice height, we can obtain a 90％ light extraction efficiency of a TIP LED.

• Korean journal of food and cookery science
• /
• v.21 no.6 s.90
• /
• pp.936-941
• /
• 2005

Green tea was extracted with different solvents such as hot water, varying concentrations of ethanol and carbon dioxide fluid. The carbon dioxide fluid extraction of green tea was a very effective extraction method in terms of antioxidant yield and stability. At pressure of 125kgf, antioxidant extract of green tea produced a yield 1.87 and 2.8 times higher than hot water and $95\%$ ethanol extract, respectively. Antioxidant extract of carbon dioxide fluid was also very stable during 7-day storage at 35?.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.8
• /
• pp.787-798
• /
• 2005

The objectives of this study were to assess extraction kinetics of heavy metals with extraction times and to assess extraction efficiencies of heavy metals with concentrations and kinds of washing solutions. Target materials were obtained from disused metal mines. Washing solutions were water, HCl(0.1, 0.3, 1.0 N), EDTA(0.01, 0.05, 0.1 M), and sodium dodecyl sulfate(SDS, 0.1. 0.5, 1.0%). Extraction efficiencies of heavy metals by water and SDS were below 1%, and extraction efficiencies of Zn and Cd were higher than those of Pb and Cu. As results, water and SDS were not effective in extracting heavy metals from mine tailings as washing solution, but extraction efficiencies of Pb and Cu with SDS solution increased as extraction time increased. Extraction kinetics of heavy metals with HCl and EDTA were faster than those with water and SDS. The majority of heavy metals were extracted within 6 hours, and extraction kinetics was almost independent of the solution concentration. Extraction kinetics of heavy metals after 6 hours was slow, but extraction kinetics was dependent on the solution concentration. Also, as concentrations of HCl and EDTA solution were stronger, heavy metals were extracted rapidly and extraction efficiencies were increased. The extraction efficiency was high in order of Cd>Pb>Zn>Cu in using 1.0 N HCl, and Pb>Cd>Zn>Cu in using 0.1 M EDTA. Consequently, extraction effectiveness was highest for Pb in using HCl, and for Pb and Cd in using EDTA with concentration increase. Extraction time of over 6 hours was not effective in extracting heavy metals.

• Resources Recycling
• /
• v.24 no.4
• /
• pp.50-55
• /
• 2015

In this study, we have investigated solvent extraction of Ga and recovery of high pure Ga solution from MOCVD dust for manufacturing of LED chip. Effect of extractan, concentration of extractant were examined for choosing the more effective extractant and high pure Ga solution was fabricated by multi-stage extraction/stripping process. For extraction/separation of Ga based on the analysis of raw-material in previous study, 3 different extractants PC 99A, DP-8R, Cyanex 272 has been investigated and the extraction efficiency of 1.5 M Cyanex 272 was 43.8%. It was conformed that extraction efficiency of Ga was 83% in multi-stage extraction and 5N high purity Ga stripping solution without impurities also obtained.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10c
• /
• pp.322-327
• /
• 2007

기존의 정보 추출에서는 웹 문서의 구조가 변경되었을 때 Wrapper가 원하는 정보를 추출할 수 없었다. 또한 웹 문서의 구조가 바뀌는 경우 동일한 정보를 Wrapping함에도 불구하고 사용자는 정보를 추출 할 수 없었던 이유를 찾지 못하는 경우가 대부분이었다. 이 문제를 해결하기 위해 본 논문에서는 Web 페이지를 시각적 블록 단위로 잘라 인접한 블록들을 통해 그래프를 형성하여 웹 문서의 구조가 일부 변경되어도 기존의 Wrapper를 통해 정보를 추출할 수 있도록 보다 효율적으로 Wrapper를 생성하고 유지관리 하는 방법을 제안한다. 또한 웹 문서를 블록 단위로 분할하여 그래프를 생성함으로써 블록 내부에 추출하고자 하는 정보에 대한 규칙이 좀 더 유연하게 표현 될 수 있으며 문서의 구조가 아닌 추출하고자 하는 정보를 중심으로 규칙을 생성함으로써 그래프의 구조뿐 아니라 그래프를 구성하고 있는 블록 내부의 구조가 일부 변하더라도 기존의 규칙을 이용하여 정보를 추출할 수 있도록 하였다.