• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.10
• /
• pp.1048-1053
• /
• 2009

It proposes an simple and intuitive method that calculates the equilibrium pressures of a propellant tank by appling the mass conservation principle on the helium in the liquid propellant and in an ullage volume of the propellant tank. A propellant loading analysis program is developed and validated against the existing reference data. And it has applied to the present developing program, COMS Chemical Propulsion Subsystem and the results are compared, it may use to develop a technology of the next geostationary complex satellite's propulsion system.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.5-8
• /
• 2005

In this report the developing trends of several clean and green propellants have been summarized. A low-acid clean propellant has been developed, which substantially reduced the content of hydrochloric acid(HCl) in the solid rocket exhaust. Although the chlorine-free approach is now preferred, this technology has not been proved yet. Another acid suppression effect of Magnalium(Mg-Al Alloy) was investigated. Reports says that the concentration of HCl could be reduced to approximately one-fifth of conventional propellant. Many 'green' propellants with low toxicity are being developed for next-generation post-boost propulsion systems, in which combustion research on the Al or Mg fine metal particles with hot steam in various stoichiometric conditions are being performed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.1061-1067
• /
• 2017

Since the 1960s hydrazine is used as a propellant to power rocket, satellites or deep space missions. Due to hydrazine's high toxicity and operating cost, the request for Green Propellant as energetic ionic liquids(HAN, ADN), nitrous oxide blends is growing. Nitrous Oxide Fuel Blend(NOFB) having advantage of a bipropellant performance as well as the advantage of a mono-propellant in respect to the simple propellant tank and feed system. It is worth replacing traditional hydrazine based propellant system if handled and designed properly.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.504-507
• /
• 2017

The polybutadiene-based HTPB used as the propellant main binder influences the curing reaction rate of the binder and propellant depending on the synthetic batch. The properties of HTPB synthesized in different batches were analyzed and applied to propellants to evaluate the curing reaction rate and mechanical properties. Finally this reaction can also affect mechanical properties of propellant. And the results suggest that proper degree of curing reaction is necessary to obtain better mechanical properties of propellant.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.2
• /
• pp.26-31
• /
• 2017

Environmental problem of the solid propellants is an issue of growing importance in solid rocket. For examples, ammonium perchlorate (AP) as an solid propellants oxidizer could create a poisonous gas and atmospheric pollutions, such as HCl. Among the several oxidizers, N-guanylurea dinitramide (GuDN) is an effective candidate substance for eco-friendly oxidizer, which has high performance, pressure exponent, and eco-friendly smog during combustion for solid propellant of gas generator. In this paper, the theoretical analysis of characteristics as a gas generator propellant, propellant manufacturing processability, propellant hardness properties and combustion characteristics were studied.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.225-228
• /
• 2007

Micro solid propellant thruster is the most feasible for development with current MEMS. Basic components of micro solid propellant thruster are diverging nozzle, micro igniter, combustion chamber, and solid propellant. Micro nozzles and micro chambers were fabricated using photosensitive glass by anisotropic wet etching technique. Micro Pt heaters on glass membrane which ignited solid propellant were developed. Components of thruster were integrated. Successful ignition was observed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.668-671
• /
• 2010

Comparative study on propellant modeling has been investigated using a non-dimensional method and an one-dimensional method. The propellant location in the chamber can not be described by the non-dimensional method. It is, however, possible for the one-dimensional method to describe. Therefore, the analysis of the interior ballistics according to the propellant arrangements has been performed by the one-dimensional method. The negative differential pressure in the chamber could be predicted and the necessity of the one-dimensional modeling for the analysis of the interior ballistics has been confirmed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.364-367
• /
• 2017

The basic design concept of the DACS(Divert and Attitude Control System) propellant is presented and the geometry optimization of the DACS propellant with limited outer diameter and maximum burning rate of the propellant is performed. Two-side burning surface conditions burned at the core and the one side of the propellant are applied to the propellant. And the optimized values for the radius of core, length of propellant, angle of end-side surface are obtained by the PSO algorithm. The direction for DACS propellant design is suggested by analyzing optimized design points for various burning rate.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.3
• /
• pp.60-70
• /
• 2001

The study of compatible liner with ADP-505 propellant based PCP was performed. HTPB/DDl was chosen as a binder of liner in order to prohibit migration of nitroester plasticizer from propellant. The possible formulations for liner were screened by peel test of EPDM insulation/liner, propellant/liner and insulation/liner/propellant. Also, the adhesion tests including tension and shear were conducted. The adhesion of liner and propellant fumed out to be very good. The peel value was shown 1.5∼1.8 daN/cm, tensile force was 5.5∼6.0bar and shear force was 4.2∼5.0bar. In the samples of insulation/liner/propellant, they also have shown good adhesion properties. The peel, tensile and shear strength were 1.8 daN/cm, 5.0∼6.0bar and 4.5∼5.0bar, respectively.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.191-195
• /
• 2005

Propellant remains as outage at engine shutdown contributes no useful impulse to the rocket and produces an unwanted increase in burnout weight. Minimization of outage, is therfore is a basic consideration in attaining the maximum performance capability of my bipropellant liquid rocket. This paper present the calculation procedures of outage and optimum loading propellant mass. And some control methods and measurement techniques for outage are presented.