• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.55-59
• /
• 2007

It is known that the adhesive interface testing of the rocket motor which using the ultrasonic wave iS superior to the other testing methods about the economically detectable abiliη of the defects. But, the signal analysis of the ultrasonic wave takes too much time and effort that the time interval of the transmitted pulse and the received pulse is too short to be separated the reflected signals because the structure of the rocket motor is multi-layers. The ultrasonic testing of rocket motor have been only applied with automatic system about extremely limited area like the debond in adhesive interface between the motor case and insulator. In this study the new technique to detect the debond between the liner and the propellant using the property of the resonance and Lamb waves was described as comparing the existence ultrasonic testing.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.3
• /
• pp.87-99
• /
• 2001

Technical status and prospect of the subsonic airbreathing propulsion system composed of jet engine fuel feeding system and air intake for missile application is described herein, including analysis of some present airbreathing missiles. Comprehension on this can be applicable both to blow deeply about the same type missiles and to get some basic idea of unmanned air vehicle's and light aircraft's propulsion system.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2001.11a
• /
• pp.1-2
• /
• 2001

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.275-281
• /
• 2007

For a cooling performance research of the combustor operated in a extreme environment of a high temperature and high pressure, we accomplished a cooling performance analysis. Generally a heat transfer characteristic in cooling passage is known well experimentally and theoretically, however heat flux in the combustion chamber isn't. In this study, fluid flow combined with heat transfer analysis is accomplished about a combustor nozzle. We tried to analyze the cooling performance with a heat transfer characteristic of a gas and coolant side in the view point of quantity on the mass flow rate to be supplied to the cooling channel. And finally, evaluation on the thermal safety of nozzle wall material was accomplished.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.5
• /
• pp.132-139
• /
• 2013

Liquid-propellant rocket engines are widely used all over the world, thanks to their high performances thrust, in particular high thrust-to-weight ratio. The sucess rate of the launching of the liquid propulsion is similar to the solid one even though it has more complex mechanical system. In general, liquid propulsion is seemed as a mature technology, the requirements of a renewed interest for space exploration has led to the development of a family of new engines, with more design margins, simpler to use and to produce associated with a wide variety of thrust and life requirements.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.2
• /
• pp.87-94
• /
• 2019

Liquid rocket propulsion test facility should provide for the interface condition installed on the upper level system for the test article. In addition, safety provision should be provided to be ready for accident such as explosion which can be occurred during development stage. For this purpose infra-structures of test facilities must be constructed so that stable combustion test can be performed and be guard against accidents. In this article, various aspects for infrastructures of propulsion test facilities are investigated including architecture and civil engineering aspects, test stand, room arrangements, interfaces among facilities, fire-fighting facilities, electrical power facilities.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.3
• /
• pp.22-29
• /
• 2003

The propulsion feeding system of KSR-III is composed of tubes, valves and PSC, and controls the flow of propellant entering to engine. The test of PTA-I is carried out to verify the characteristic of propulsion feeding system and component. The tests of operation characteristic of component, hydraulic characteristic of tubes, flow control using venturi, oscillation of dynamic pressure, characteristic of regulator are carried out. Troubles of component are found out, and renewed, and the performance of the propulsion feeding system is verified through PTA-I. The results of PTA-I are used to the configuration of propulsion feeding system and test of PTA-II.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.69-69
• /
• 2003

우주발사체의 비행 목표는 위성의 궤도 투입이다. 이를 위해서는 발사체에서 요구되는 추력값과 총추력을 보장하는 추진기관이 개발되어야 한다. 엔진은 엔진 자체의 작동 안정성을 위해서 유량제어를 필요로 하지만, 이뿐만이 아니라, 발사체의 비행임무 수행을 위해서도 추진제가 모두 소진되는 시스템(TDS:Tank Depletion System) 개념이 도입되어야 하며, 이는 유량 제어를 통해서 실현된다. 본 연구에서는 우주발사체의 비행임무 수행에 필요한 즉, 총추력 오차 범위, 추력 오차 범위, 추진제 탑재량 및 잔류량 오차범위 관점에서 필요한 추진기관에 요구되는 성능을 검토하였고, 이를 위해 TDS 개념의 도입과 더불어 이를 구현할 수 있는 유량제어 개념을 제시하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.79-82
• /
• 2004

Propellant feeding system is the system to satisfy propellant feeding requirements(mass flow rate, pressure, temperature) at engine inlet of launch vehicle. Propellant feeding test facility is being constructed for the development scheme of pressurization system, processing in tank, propellant piping system, and flow control system that are main technologies in order to develope propellant feeding system. This paper introduces the propellant feeding test facility being constructed in KARI.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.1
• /
• pp.28-36
• /
• 2016

Theoretical model of a variable thrust solid rocket motor with a pintle nozzle was derived. For the chamber pressure control, classical model linearization and proportional-intergral controller was used. And then two types of gain scheduling controller were suggested to imporve controller performance for the non-linear propulsion model. Considering characteristics of systems, control gains were scheduled by chamber pressure or free volume. Step responses of each controllers were compared. As a result, the proper control algorithm about characteristics of variable thrust rocket motor was suggested.