• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.1
• /
• pp.229-236
• /
• 2018

In this paper, we see the acquisition and tracking of L1 C/A signal on GPS receiver, do the research on GPS signal capture principle's foundation, and do the simulation of the GPS signals capture process for it's realizing and analyzing by Matlab. The simulation result, we can confirm this method's accuracy and the feasibility, and see that a satellite receiving ability play an important role in the efficiency of receiver.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.71-76
• /
• 2014

In this paper, we proposed the 1-channel monopulse receiver which has the new configuration and described the operation procedures. Also, we compared and analyzed the proposal receiver and the general 3-channel monopulse receiver. As a result, it is apparent that the monopulse ratio of the proposal receiver is equal to that of the 3-channel monopulse receiver. The proposal receiver achieve the simple receiver configuration and the simple tracking procedures, as contrasted with the 3-channel monopulse receiver. Also, the proposal receiver has advantages in terms of size, weight, cost and power. Because the proposal monopulse receiver require 1-channel receiver and need not the signal processor in comparison with 3-channel monopulse receiver which require 3-channel receiver and need the signal processor.

• Journal of Advanced Navigation Technology
• /
• v.15 no.4
• /
• pp.495-501
• /
• 2011

The characteristics of a discriminator estimating a tracking error in a signal tracking loop of a GPS receiver can be affected by the noise power, and the slope of the discriminator function is actually lowered as the noise power increases. In this paper, an algorithm to compensate the lowered slope of the function using the estimated C/N0 is studied, and a new design method of a code tracking which provides more accurate tracking error than a conventional one by adopting the compensation algorithm is proposed. Through the experimental results, finally, it has been check that the accuracy of the proposed DLL is enhanced about 50% when the dynamics of the vehicle is 20g/s.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.7
• /
• pp.500-507
• /
• 2018

A three-channel radio frequency (RF) monopulse receiver using a data signal with a maximum transmission rate of 274 Mbps was designed. A monopulse receiver using a broadband communication signal was designed to operate in the Ku band, and it consists of a down-conversion module and a signal-processing module. To satisfy the performance of the proposed RF monopulse receiver, a signal-processing function less than the reception sensitivity for each transmission rate according to the adaptive transmission rate is required. To minimize signal reception and mutual frequency interference of various bandwidths, two RF filters were applied. To verify the satisfaction of system requirements, an AWR Corp. simulation tool was used.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.2
• /
• pp.97-102
• /
• 2019

The GNSS(Global Navigation Satellite System) provides important information such as Position and Navigation, Timing(PNT) to various weapon systems in the military. as a result, applications that employ satellite navigation systems are increasing. therefore, a number of studies have been conducted to deceive the weapon systems that employ GNSS. GNSS spoofing denotes the transmission of counterfeit GNSS-like signals with the intention to produce a false position and time within the victim receiver. In order to deceive the victim receiver, spoofing signal should be synchronized with GNSS signal in doppler frequency and code phase, etc. In this paper, Civilian GPS L1 C/A spoofing signals have been evaluated and analyzed by SDR receiver.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.5
• /
• pp.12-20
• /
• 1999

본 논문에서는 DVB-T (digital video broadcasting-terrestrial) 수신기의 동기화 알고리듬과 각 동기단 사이의 연동 알고리듬을 제안한다. OFDM( orthohonal frequency division multiplexing) 수신단에서는 프레임 동기, 반송파 동기, 심볼 타이밍 동기가 요구되어진다. 기존의 반송파 동기 방법은 부반송파 간격의 정수배 주파수 옵셋 보상 후 잔존해 있는 주파수 옵셋이 -0.5×(부반송파 간격) 혹은 +0.5×(부반송파 간격)에 가까운 값을 가질 때 많은 시간이 소요되는 문제점을 가지고 있다. 본 논문에서는 시스템의 복잡도를 그대로 유지 하면서 초기 동기화 시간을 줄일 수 있는 반송파 동기 알고리듬을 제안한다. 그리고 DVB-T모드를 추정하는 알고리듬을 제안하고 반송파 동기 추적루프와 심볼 타이밍 동기 추적루프를 동시에 동작시킴으로써 초기 동기화 시간을 추가적으로 줄일 수 있는 심볼 타이ALD 동기 알고리듬을 제안한다. 그리고 전체 수신기 모델의 연동 방안을 제시한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.1251-1253
• /
• 2015

최근 통신기술의 발달로 사용자의 위치 정보에 기반한 다양한 위치기반서비스(Location Based Service)가 각광을 받고 있다. 위치기반서비스의 경우 대부분 GPS(Global Positioning System)정보를 사용하지만 실내에서는 위성정보를 받을 수 없어서 위치추적이 어려운 문제가 있다. 본 논문에서는 실내 공간에서 사용자의 위치를 추적하기 위해 비콘을 이용한 위치 찾기 서비스를 제안한다. 제안하는 방법은 기존 비콘 통신 방법인 비콘을 고정시키고 고가의 수신기를 휴대해야 하는 단점을 보완하였다. 이를 위해 비콘과 수신기의 역할을 변경하여 수신기를 고정시키고 비콘에 이동성을 주어, 실내에서도 사용자들이 보다 저렴하고 효율적으로 사용할 수 있도록 구현하였다. 특히, 삼각측량법을 활용하여 보다 정확한 위치를 찾도록 구현하였다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.24 no.3
• /
• pp.172-177
• /
• 2023

In this paper, 2-dimensional backtracking method for ultrasonic signals. Ultrasonic sensors are a common technology used in industrial fields as many studies have been conducted on distance measurement and indoor location tracking using transmission and reception devices in pairs. A method for tracking a signal of an arbitrary ultrasonic transmission device on a 2D plane using only a receiver of an ultrasonic signal is proposed. In order to track the ultrasonic signal, the receiver receives the signal by making at least three. The three receivers may calculate a direction and a distance using a time difference in which the ultrasound reception sound is reached. The existing method of tracking signal sources using ultrasonic waves has a problem of time synchronization of devices because the transceivers must be paired or installed independently for each sensor. In order to solve this problem, the distance of the ultrasonic receiver is minimized, and it is configured as one device. The sensor installed as one device may be processed by one operator, thereby solving the time synchronization problem. To increase time difference accuracy, high-speed 32-bit timers with high time resolution can be used to quickly calculate and track distances and directions.

• Journal of Broadcast Engineering
• /
• v.5 no.2
• /
• pp.273-280
• /
• 2000

Channel characteristics between the outdoor transmitter far away from the building and receivers inside the building are explored theoretically using ray tracing technique. In this paper, 29 receivers are located on the single floor of the building to observe the variation of channel properties depending on receiver location. For each receiver, amplitudes and phases of ail the possible rays form the transmitter to the receiver are traced to obtain impulse response. Statistical results for rms delay spread and power delay profiles for representative receiver location are given.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.3
• /
• pp.212-217
• /
• 2016

The S-band receiver for Low Earth Orbit satellite is designed and fabricated as engineering model. Demodulator is implemented by using FPGA for extension of demodulator method. The receiver consists of RF Block, Digital demodulator and Power stage and has a Doppler tracking function to compensate a frequency shift that occur on the operation. The measured results of fabricated receiver show BER of less than $1.0{\times}10^{-6}$ at -110dBm RF input power and equipped a frequency tracking of ${\pm}100KHz$ relative to the center frequency. TID test was satisfied with the results of the test criterion is 10krad.