• Korean Journal of Ecology and Environment
• /
• v.55 no.4
• /
• pp.376-389
• /
• 2022

Despite the consumption of disinfectants have been increased by COVID-19 pandemic, the fate of the chemicals in aquatic food webs are still unclear. In order to understand the trophic transfer of the chemicals, the concentration of disinfectants including six benzalkonium chloride (BACs) and five didecyldimethylammonium chlorides(DDACs) were measured at the Geum (2020), Han (2021), and Yeongsan River (2021), before and after rainfall. The highest concentration of ∑BACs (mainly C12 and C14) and ∑DDACs (mainly C10 and C14) were observed in the Han River, followed by Yeongsan River, Geum River Estuary, and Gapcheon. After rainfalls, both concentration and detection frequency were decreased in all sites. Although the BAC and DDAC seems to be accumulated in organisms, they were bio-diluted rather than magnified in the aquatic food web with the biomagnification factor(BMF) of less than 1, trophic magnification slope (TMS) from -0.236 to 0.001, and trophic magnification factor(TMF) from 0.85 to 1.01.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.15-15
• /
• 2023

2020년 기준 국내 상수도 보급률은 99.1% 차지하고 있으며(환경부, 2019), 수도관리차원에서 수돗물은 먹는 물로 시판되어질 만큼 우수한 관리체계를 유지하고 있다. 그 반면에 지하수는 생활용수, 식품가공, 농·축산, 양어, 군부대를 비롯한 전국지역에서 연간 10억 8천만톤 용수를 소비하고 있음에도 (환겨례 신문, 2013; 환경부, 2019) 사용되는 지하수의 약 65%가 음용수 불가판정을 받았으며, 최근 지하수의 오염비율은 급격히 증가하는 추세이다. 특히, 지하수관정의 관리부주의에 의한 수질오염 및 수인성 다제내성균(슈퍼박테리아) 등에 의한 오염사례가 국내는 물론, 국제적으로 다수 보고되고 있는 실정이다 (환경부, 2013). 현재 지하수 수질관리는 공공기관 및 지자체 지정기관을 통해 진행되고 있으며, 검사기간은 수질채취로부터 통상 7~15일정도 소요되어 수질 관리 및 기준, 검사주기에 대한 애로가 많다. 현장 지하수관정에서 실시간 수질을 모니터링하고 이에 연동된 자동 수처리 시스템의 개발 및 도입은 나날이 심각해지는 환경오염 상황에서 선제적 예방과 해결방법으로 중요한 요소기술이다. 현재 지하수오염 및 부적합 음용의 수질처리는 화학약품, 필터여과, UV살균, O₃ (플라즈마)을 이용하는 것이 대표적이나, 화학약품의 경우 2차 오염이나 식품 세척 및 가공에 있어 부적합성의 한계점이 있다. 필터여과의 대표적인 RO필터의 경우 약 50% 순손실이 발생하고, UV 살균의 경우 UV에 의한 사용관리자의 위험 및 장비의 광부식 문제, O₃ 의 경우 고압전류 사용에 따른 위험성 등의 한계점이 나타나고 있다. 지하수 수질정화를 위한 광유도 활성산소(¹O₂, ·O^-₂)는 광감응제에 가시광의 빛 조사를 통해 생성되는 활성산소로의 에너지 및 전자 전이가 동시 진행되어 단일항 산소(¹O₂)와 슈퍼옥사이드 이온(·O^-₂)을 생성하게 된다. 생성된 활성산소는 유해미생물 또는 유기화학물과 개열, 제거, 치환 반응 등을 통해 미생물사멸 및 유해화학물질들이 분해 가능하다. 이를 이용한 지하수 유해미생물 사멸기술, 장비, 실시간 지하수의 분석기술 및 정수처리, 지하수 물순환 시스템 개발뿐만 아니라 지하수 음용수 및 오염개선, 지하수 기저유출에 의한 오염원 저감으로부터 지류·지천, 하천 본류 수질개선 등의 대상지역에 활용 가능하다. 또한 광유도 활성산소는 기존 상수도 수처리에 있어 오존(O₃) 처리와 이산화티탄을 이용한 AOP과정을 단일처리 공정으로, 기존 O₃ 의 특성상 확산 거리가 매우 길어 사람을 포함한 생체 내에 유입 시 다양한 부작용 발생과 O₃ 차폐시설 요구의 문제점 극복의 대안으로 환경 및 인체에 무해한 광유도 활성산소 시스템을 적극적으로 도입 및 적용해야 한다. 본 연구 목적은 정류상태 흡광분광기술을 이용한 실시간 수질 모니터링과 광유도 활성산소를 이용한 유해 미생물의 멸균효능 및 지하수 수질관리 기술로의 적용 가능성을 제시하고자 한다.

• Journal of Korea Water Resources Association
• /
• v.56 no.6
• /
• pp.381-392
• /
• 2023

Precipitation, runoff, and evapotranspiration are changing worldwide due to climate change and human activities. Because watershed runoff is an important component of the hydrological cycle, it is important to investigate the changes in watershed runoff for water resources management. This study collected observed data of runoff, precipitation, temperature, and evapotranspiration in the Geum River basin as well as their synthetic data according to Representative Concentration Pathways (RCP) scenarios, investigated the trend of hydro-meteorological variables using the Mann-Kendall test, and quantitatively evaluated the effects of climate change and human activities on the watershed runoff using the climate elasticity approach and the Budyko framework. The results indicated that the relative contribution of climate change and human activity to changes in runoff varies from region to region. For example, the watershed with the greatest contribution from climate change and human activity were the Yongdam Dam (#3001) basin and the Daecheong Dam (#3008) basin, respectively. Future climate change showed an increase in precipitation and temperature in both RCP 4.5 and 8.5 scenarios, resulting in changes in runoff in the Geum River basin from 44.8% to 65.5%, respectively. We concluded that the effect on watershed runoff can be separated into climate change and human activities, which will be important information in establishing sustainable water resource management plans.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.12
• /
• pp.97-107
• /
• 2009

Television News has significant impact on the information analysis of viewers by delivering world news to anonymous individuals everyday. We need to pay more attention to resolution considering the fact that even slight facial expression and the dress of TV anchor can be noticed by viewers in the high definition age, called HD TV, by radical changes in broadcasting situation. As a result, the beauty of expression that lighting technology has is extremely important in the high definition age. In news broadcast, as a phenomenon according to this change in trend, people have been looking for change in order to break with traditional TV news production by adopting DLP(Digital Lighting Processing) or LED(Light Emitting Diode). This effort has contributed to creating proper picture quality appropriate for HD TV. Nowadays Digital imaging is creating new trend in TV news production method from traditional analog-based lighting environment thanks to the development of IT(Information Technology) and digitalized lighting equipment. This change has led to building of HD studio and appropriate sets and lighting system. There are film set and projector which projects image on the screen and PDP, LCD, and DLP which has been used widely in recent years and LED which is often used as background in news program as examples, which has appeared since 1990s with HD TV. In this article, I analyzed the KBS News 9 lnce 1990s with in order to research the influence of television image component on the alyzed the KBS of TV article, I. I wille uggest the category of TV anchor image formulation in delivering information by means of lnce 1990s with based on the analysis result.

• Design Convergence Study
• /
• v.15 no.2
• /
• pp.1-15
• /
• 2016

The purpose of this study is to identify the characteristics of aging-friendly technology that can be integrated into future smart homes in an aging society. The literature survey and content analysis method were used to collect and analyze data. Papers of the international journal ICOST (International Conference on Smart Homes and Health Telematics) that professionally deal with converged technologies were analysis units. Sixty-five papers among 215 papers published from 2007 through 2014 were selected on the basis of end-users orientation. Totally, out of 65 papers 76 technology items were extracted. Characteristics of those technologies were analyzed focusing on purpose and application methods. As results, in terms of purpose, the technologies were oriented to provide both of psychological and physiological support to the users, focusing on the safety, convenience, health and entertainment to extend independent life of the elderly. Among the application method such as building structure, furniture, product, wearable device and free movable robot, product were dominant. Through those results, the aging-friendly technology is expected to alleviate a wide range of issues in aging society.

• Design Convergence Study
• /
• v.16 no.3
• /
• pp.51-68
• /
• 2017

User-centered design and Experience Design are emerging in the design area. Therefore, the Role-Playing Method has been actively utilized in the process of design development. But the terms of Role-Playing Method which follow these trends. has not been integrated. Further, it is hard to utilize the process of design development because the process method is not settled yet. Therefore, this study is into two parts of the research: Defining the concept of Role-Playing and the experiment of Role-Playing. Firstly, defining concept part is to research the design method corresponds to a wide range of Role-Playing that has a similar definition. After then, analyzed the examples of Role-Playing Methods which was derived matrix from Role-Playing classification. With this process, two axes of the matrix have been produced such as role·scenario and puppet. Through the analysis of the utility and vulnerability of the Role-Playing classification matrix, this study was able to propose the using step of the Role-Playing in the double diamond model. Secondly, two experiments were conducted in the experiment part. Through the pilot experiment explored the possibility of a study of the Role-Playing Method. In the second experiment, the process was conducted with Role-Playing classification matrix. As a result, each Role-Playing has different insights. In terms of design, different aspects of composing elements were found. Plus, in the position of the user, Role-Playing are can observe different parts of user's cognition between acting and puppet. Thus, the role-playing was proven to be useful to find out the point of improvement and insight in service from different perspectives and it resulted in the role playing which can be utilized selectively according to the type of service.

• The Korean Journal of Franchise Management
• /
• v.3 no.1
• /
• pp.92-110
• /
• 2012

Due to the social problems including recent economic crisis and unemployment rate increase, the demand of business foundation market has been increased and, in the meantime, on the basis of the business foundation support policy of the government including youth foundation support policy and Small & Medium Business Administration foundation planning, business foundation market has been showing steady growth trend. With this enlargement of foundation market, as the accompanied increase of franchise market is expected, it is considered that the importance of more realistic and concrete research about franchise market be larger than before. This study considered brand image, main office support, foundation cost, information search activity as the advanced variable of effect on brand selection and established the cause of effect on brand selection by improving the existing advanced research, and its result is as follows. First, according to foundation business kind, age, sex, yes or no of marriage, there is some difference III the thought about brand image and foundation possibility. Second, Second, the most important factor of franchise contract intention is economical specificity. It is difficult to consider brand image, franchise support and information search activity as the property having a big effect on preliminary founder, and it was shown that the cost for franchise management(Consistency with initial foundation cost and self-capital, promotion cost, management fund, facility/equipment reinvestment, etc.) is an important property. Specially, it was shown that consistency with initial foundation cost and self-capital is the most important factor for preliminary founder.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1D
• /
• pp.115-123
• /
• 2006

Recently, construction claims have been increased for protecting the rights of construction participants and effectively adjusting the changes under the contract. Thus, the importance of claim management has been emphasized in the construction industry. In domestic construction industry, some claim issues involved in construction activities are often being developed into disputes and even litigations because of the absence of methods or systems for the dispute resolution, and the lack of judicial precedents which can be provided as the references for resolving a particular dispute. In general, the judicial precedents related to the disputes and litigations occurred among construction participants would be extremely valuable in evaluating and analyzing current claims issues. However, such useful information has not been effectively accumulated and utilized in resolving the similar or sometimes identical types of disputes, thus requiring a large amount of additional costs, time and efforts. The primary objective of this study is to propose a web-based decision support system for construction claim management, which enables contractual participants to easily access and use the information of the judicial precedents related to the current construction claims. The decision support system is composed of 'prevention' and 'settlement' modules for avoiding and systematically resolving the construction claims.

• Asia Marketing Journal
• /
• v.10 no.2
• /
• pp.31-69
• /
• 2008

The purpose of this study is to identify the organizational characteristics that enhance CRM performances of a company. Based on a review of diverse definitions of CRM performance, this study examines the relationships among CRM performance measures and organizational characteristics. A questionnaire survey of 123 CRM managers of Korean companies was conducted to test the proposed research model, and a series of structural equation modeling identified the strong effects of organizational characteristics on CRM performance. It was found that top management commitment to CRM and a firm's strategic readiness lead to high levels of CRM investment, which, in turn, enhance directly task-related performance and indirectly customer-related performance. This study also confirmed that customer orientation is significantly related to task-related CRM performance and that the variables of CRM commitment and organizational culture may enhance customerrelated performance indirectly through their effects on the task-related performance. However, organizational members' resistance to change was found to have no effects on CRM performance. Overall our research broadly supports the role of organizational characteristics revealed in the CRM literature.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.5
• /
• pp.230-238
• /
• 2023

Small and medium-sized food manufacturing enterprises are largely reliant on manual labor, from inputting raw materials to palletizing the final product. Recently, there has been a trend toward smartness and digitization through the implementation of robotics and sensor data technology. In this study, we examined the effectiveness of improvement through 3D simulation on two repetitive work processes within a food manufacturing company. These processes involve workers whose speed cannot match the capacity of the applied equipment. Two manual processes were selected: the weighing and packing process performed by workers after skewer assembly, and the manual batch process of counting randomly delivered frozen foods, packing (both internal and external), and palletizing. The production volume, utilization rate, and number of workers were chosen as verification indicators. As a result of the simulation for improving the 3D process, production increased by 13.5% and 56.8% compared to the existing process, respectively. This was particularly evident in the process of applying palletizing robots. In both processes, as the utilization rate and number of input workers decreased, robots could replace tasks with high worker fatigue, thereby reducing work overload. This study demonstrates the potential to visually compare the process flow improvement using 3D simulations and confirms the possibility of pre-validation for improvement.