• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.4
• /
• pp.36-43
• /
• 2011

The forward collision of vehicles in high speed can cause a chain collisions and high fatality rate. Most of the forward collisions are caused by insufficient braking distance due to detection time of driver and safe distance. Also, accumulated detection time of driver is cause of chain collisions after the forward collision. The FVCWS prevents the forward collision by maintaining the safety distance inter-vehicle and reducing detection time of driver. However the FVCWS can cause chain collisions because the system that interacts only forward vehicle has accumulated detection time of driver. In this paper, we analyze forward and chain collisions of normal vehicles and FVCWS vehicles on static traveling scenario. And then, we analyze and compare V2V based FVCWS with them after explaining the system. The V2V FVCWS reduces detection time of driver alike FVCWS as well as remove accumulated detection time of driver by broadcasting emergence message to backward vehicles at the same time. Therefore, the system decrease possibility of forward and chain collisions. All backward normal vehicles and 3~4 backward FVCWS vehicles have possibility of forward and chain collisions in result of analysis. However V2V FVCWS vehicles almost do not chain collisions in the result.

• Journal of Digital Convergence
• /
• v.16 no.9
• /
• pp.173-178
• /
• 2018

The vehicle collision speed in mid and high range can be checked by EDM(Event Driven memory) data recorded when the air bag works. But it's difficult to estimate the low speed of vehicle collision. And estimating the speed is important because the injury level can be changed by the impact speed. The study proposed an estimating algorithm by analysing the images recorded in car blackbox instrument. Low speed rear collision accidents simulated with wire winding motor for various vehicle types. The study estimated the impact speed with the ratio of the distance change between two vehicles and the length change of the number plate of front vehicle. The closer the vehicles are, the larger the plate length is. You can estimate the impact speed with the ratio. The impact speed is calculated with the initial distance for a specific length of number plate in the algorithm. The results can be applied to the linear rear collision because the angle of impact was not considered in this study.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.7
• /
• pp.1247-1254
• /
• 2009

The purpose of the present study was to compare and analyze the differential effects of in-vehicle electronic device usage types(searching for targeted destinations in navigational purpose, watching TV in entertain purpose, and dialing a cellular-phone in phone-usage purpose) on driver's front-to-rear-end collision avoidance behavior, and to find effective collision warning format for this behavior. The result indicated that (1) the drivers showed more impaired collision avoidance performances when they were asked to search the name of targeted destination than the other task requirements, and (2) auditory warning appeared to be most effective among the other types of warning. In particular, it was suggested that the "Visual-Only" collision warning could induce most undesirable result when the drivers were engaged in both visual and auditory information processing.

• Journal of Korean Society of Transportation
• /
• v.30 no.2
• /
• pp.127-136
• /
• 2012

Multi-car rear-end collision accidents have three categories: sequential collision from the rear which is commonly referred to as chain reaction collision, sequential collision from the front, and mixed-order collision. This paper suggests several effective methods of reconstruction analysis for multi-car rear-end collision accidents. First, by incorporating the traditional empirical method which uses vehicle damage caused by brake dive and passenger injuries, with results of theoretical analysis made within mechanics of rigid body, it is made possible for the method to be put to immediate practical use. A methodology to precisely analyze multi-car rear-end collision accidents was suggested using a simulation program simultaneously with a video event data recorder which is starting to be widely used in domestic vehicles. To go beyond the simple intuitive analysis of the video event data recorder, the simulation analysis based on the results of video analysis was executed to acquire various information, so that the causes and responsibility could be clearly stated.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.685-688
• /
• 2010

사고 현장에서 사고 차량을 옮기거나 주차위반 차량을 견인사업소로 이동시키기 위해 주로 이용되고 있는 리프트식 견인차는 피견인차의 구동방식에 따라 차량의 전부 또는 후부을 들어 올려 구동 바퀴로 이동할 수 있도록 하는 특수차량이다. 본 논문에서는 견인중인 견인차와 이송중인 전륜 피견인차 및 일반 주행 중인 차량 사이에서 일어날 수 있는 3중 추돌사고를 일반적인 3중 추돌사고와 비교하여 견인 중에 발생하는 추돌사고가 얼마나 위험한지를 직접 확인한다. 각 차량은 CATIA를 이용하여 모델링하고 이를 상용 유한요소해석 프로그램인 ANSYS를 통하여 피견인차의 후부를 주행 차량이 들이 받는 추돌을 시뮬레이션한다. 또한 견인차가 피견인차를 들어 올려 발생되는 피견인차의 각도에 따른 추돌의 영향을 해석한다.

• Journal of Korean Society of Transportation
• /
• v.25 no.5
• /
• pp.57-66
• /
• 2007

This study deals with the rear-end accidents of 4-legged signalized intersections in Cheongju. The objectives are to analyze the characteristics of the accidents and to develop the models which explain the relations among the accidents, traffic volumes and geometric structures. In pursuing the above, the study uses the data 308 rear-end accidents occurred at the 106 intersections (2004). The main results analyzed are as follows. First, the rear-end accidents were analyzed to be serious. because the ratio of severe accidents is 77.6%. Second, the more accidents were occurred of in the night than the daytime and in the approaching sections of intersections. In particular, the accidents of large-size struck vehicles were analyzed to be more serious. Finally, the multiple and Poission regression models developed in this study are all analyzed to be statistically significant.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.2
• /
• pp.135-142
• /
• 2007

MADYMO human model with the detail neck was used to investigate the reaction force of neck and neck injury from rear impact directions. In the validation simulation, head acceleration, thorax acceleration and the global kinematics of the head and neck were correlated well with experimental data. Acceleration data from three 15 km/h low speed car rear impact pendulum tests(rear-end, offset, oblique) were used to simulate the model. In the simulation results, the reaction force on the facet joint and discs in the oblique rear impact were higher than rear-end, offset rear impacts. Further research is still needed in order to neck injury analysis about different crash parameters.

• Journal of Korean Society of Transportation
• /
• v.14 no.4
• /
• pp.155-178
• /
• 1996

신호교차로 서비스수준은, 객관적으로 측정 할 수 있는 여러 가지 기준에 의해 결정될 수 있다. 예를 들면, 지체시간(Delay), 교통사고수(Number of Accident), 교통사고율(Accident Rate), 충돌수(Traffic Conflict), 그리고 교통사고에 노출된 차량수(Exposure)등이다. 지금까지는 1985 Highway Capacity Manual(HCM)에서 소개된 지체시간에 의한 서비스수준 결정방법이 널리 사용되어 왔다. 본 논문에서는 1985 HCM 방법의 중용성과 유용성에 대해 논하지 않고, 교통안전(Safety)에 의한 신호교차로 서비스수준 결정방법을 제시하였다. 교차로의 위험도(Degree of Intersection Hazard)를 예측하기 위해, 교통사고빈도 수가 가장 높은 두가지 교통사고 유형, 즉 좌회전추돌(Left-Tum)과 후미추돌(Rear-End) 예측 모형이 개발되었다. 여기서 첫째, 좌회전추돌 위험도를 예측하기 위하여 음지수 분포(Negative-Exponential Distribution)를 이용한 확률적 모형이 개발되었다. 둘째, 후미추돌 위험도를 예측하기 위하여 연속류 모형(Continuum Model)을 이용한 거시적 모형이 개발되었다. 개발된 두가지 모형을 이용하여 신호교차로 안전도를 예측하였으며 교차로 서비스수준이 안전도에 의해 결정되었다. 본 논문에서 제시된 교통안전에 의한 신호교차로 서비스수준 결정방법은 연동교차로를 제외한 독립교차로에만 적용이 된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4100-4107
• /
• 2010

The wrecker truck of lift type is used to move damaged car in accident spot or to move illegal vehicle in towaway zone toward pound.. This special vehicle drives by lifting front or rear side of car with the driving type of towed car. Each car is modelled with CATIA and is simulated with FEM analysis program ANSYS. This study analyzes how dangerous is the triple collision among the wrecker-towed car-driving car as comparing with the usual collision accident with cars. It is studied how responsible is the towed car in case of crashing its back side by driving car. The influence on the driving angle of towed car by lifting wrecker is also considered.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.2
• /
• pp.58-76
• /
• 2019

As the number of reported injuries has tended to increase over time, large hospitalization expenditure from excessive medical treatments and hospitalization, and insurance frauds associated with moral hazard in minor collisions have caused a global societal problem. Many occupants of rear-ended vehicles involved in rear-end collisions complain of whiplash injury, which is also known as neck injury, without any anatomical and radiological evidence. With only clinical symptoms, stating that a whiplash injury is a type of injury defined by the Abbreviated Injury Scale would be difficult. Therefore, this study focuses on minor rear-end collisions, where the rear-ender vehicle collides with the rear-ended vehicle at rest. The mathematics dynamic model is employed to simulate a total of 100 rear-end collision scenarios based on various weights and collision speeds and identify how the weights and speeds of both vehicles influence the risk of whiplash injury in occupants involved in minor rear-end collisions. The possibility of an injury is very high when the same-weight vehicles are involved in accidents at collision speeds of 15 km/h or higher. The possibilities are 36% and 84% with collision speeds of 15 km/h and 20 km/h, respectively, if weights are disregarded.