• Title/Summary/Keyword: 최종속도

Search Result 1,214, Processing Time 0.029 seconds

물리의 세계 - 고양이와 빗방울

  • Kim, Je-Wan
    • The Science & Technology
    • /
    • v.32 no.3 s.358
    • /
    • pp.34-34
    • /
    • 1999
  • 고양이가 32층아파트에서 떨어졌는데도 큰 부상없이 살았다고 하는데 왜 그럴까. 물체가 떨어질 때는 떨어지는 속도가 가속되는데 중력은 일정한데도 저항력이 커지므로 언젠가는 중력과 공기의 저항력이 맞비기게 되어 물체는 더 가속되지 않고 일정한 최종속도를 유지한다. 32층 아파트에서 떨어진 고양이의 최종 속도는 초속 18m정도가 되므로 고양이는 살 수 있는데 이러한 물리학의 원리를 고양이는 알고 있을까.

  • PDF

Relations between Initial Displacement Rate and Final Displacement of Arch Settlement and Convergence of a Shallow Tunnel (저심도 터널의 천단침하 및 내공변위의 초기변위속도와 최종변위의 관계)

  • Kim, Cheehwan
    • Tunnel and Underground Space
    • /
    • v.23 no.2
    • /
    • pp.110-119
    • /
    • 2013
  • It is generalized to measure the arch settlement and convergence during tunnel construction for monitoring its mechanical stability. The initial convergence rate a day is defined from the first convergence measurement and the final convergence defined as the convergence measured lastly. The initial and the final tunnel arch settlement are defined like the preceding convergence. In the study, the relations between the initial and final displacements of a shallow tunnel are analyzed. The measurements were performed in the tunnel of subway 906 construction site in Seoul. The overburden is 10-20 m and the tunnel goes through weathered soil/rock. The width and height of the tunnel are about 11.5 m, 10m, respectively. So this is a shallow tunnel in weak rock. The length of tunnel is about 1,820 m and the tunnel was constructed in 2 stages, dividing upper and lower half. The numbers of measurement locations of arch settlement and convergence are 184 and 258, respectively. As a result, the initial displacement rate and the final displacement are comparatively larger in the section of weathered soil.

계자회로 개방시의 직류기의 이상현상에 관한 소고

  • 권순국
    • 전기의세계
    • /
    • v.11
    • /
    • pp.1-7
    • /
    • 1963
  • 직류분권 전동기에 있어서 정상운전시에 계자회로를 개방하면 회전자의 속도가 매우 상승하는 경향이 있다. 여기에서는 이러한 이상현상 자체를 수학적으로 해석해서 개방후의 회전자의 속도변화와 전기자전류의 변화를 시간의 함수로써 구하였다. 그리고 회전자의 속도 및 전기자전류, 잔류자기와 회전자 최종속도와의 관계, 부하 torque를 생각했을 경우의 회전자속도강하조건, 및 speed-torque curve도 구해보았다. Speed-torque curve의 경우에는 수학적으로는 복잡함으로 간단히 하기 위하여 과도기간을 편의상 subtransient와 transient의 두가지 period로 나눈 다음 물리적 현상을 고려하여 sub-transient를 무시해서 생각하였다. 본 실험에서 detector로는 Diehl tachometer-generator를, tachometer입력으로는 Hewlett-Packard사제 Model 200CD형 oscillator에 의한 20cps signal을 사용하였다. 그리고 회전 속도와 전기자전류를 Duel Channel Sanborn-150 recorder로 기록하였다.

  • PDF

Accident Reconstruction Analysis by Mathematical and Optimization Method from Skid Mark and Stopped Position (활주흔과 정지지점으로부터 수학적방법과 최적화방법에 의한 교통사고 재현기법에 관한 연구)

  • 유장석;장명순
    • Journal of Korean Society of Transportation
    • /
    • v.20 no.4
    • /
    • pp.7-17
    • /
    • 2002
  • 본 연구는 차대차 충돌사고시 차량충돌위치와 충돌속도 분석기법을 사고사례를 통해 연구하였다. 차량충돌위치는 사고현장 노면에 생성된 타이어 마크를 이용하여 수학적방법으로, 충돌속도는 실제 사고차량 최종정지위치와 모의충돌실험을 통해 분석된 차량 최종정지위치와의 차를 목적함수로 하여 이를 최소로 수렴하는 최적화기법을 이용하였다. 연구결과, 승용차량 오른쪽 앞바퀴 위치는 중앙선으로부터 좌측으로 0.45m 떨어진 진행방향 1차로 상이고, 왼쪽 앞바퀴는 중앙으로부터 좌측으로 0.345m 떨어진 지점에 위치한 상태이다. 최적화기법을 이용하여 사고차량의 충돌속도를 분석한 결과. 최적화의 오차율이 0.8%인 경우 충돌속도는 승용차량 67.75Km/h, 짚형 승용차량 29.67Km/h로 분석되었으며, 충돌 후 x축에 대한 속도는 승용차량 20.0Km/h, 짚형승용차량 15.69Km/h이고, y축에 대한 속도는 승용차량 15.68Km/h, 짚형 승용차량 7.66Km/h로 분석되었다. 반면, 기존 충돌속도 분석모형식을 이용하여 사고차량의 충돌속도를 분석한 결과 승용차량 64.97Km/h, 짚형승용차량 31.27Km/h로 도출되었다. 따라서, 최적화기법을 통해 분석한 충돌속도와 기존 분석모형식을 이용하여 분석한 충돌속도와의 오차가 승용차량 2.78Km/h, 짚형승용차량 1.6Km/h로 최적화기법을 이용하여 분석한 결과에 대한 신뢰성이 높은 것으로 연구결과 도출되었다 따라서, 추후 차 대 차 충돌사고를 분석함에 있어 타이어 흔적을 이용한 수학적방법과 모의충돌실험을 통한 최적화기법을 이용하면 충돌속도는 물론 충돌전.후 차량의 운동특성에 대한 정확한 분석이 이루어질 수 있을 것으로 기대된다.

Measurement of Terminal Velocity for Scatter Prevention of Powder in the Voloxidizer for Oxidation of UO$_{2}$ Pellet (UO$_{2}$ 펠릿 산화로의 분말 비산 방지를 위한 최종속도 측정)

  • Kim Young-Hwan;Yoon Ji-Sup;Jung Jae-Hoo;Jin Jae-Hyun;Hong Dong-Hee
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.3 no.2
    • /
    • pp.77-84
    • /
    • 2005
  • A voloxidizer for a hot cell demonstration, that handles spent fuels of a high radiation level in a limited space should be small and spent fuel powders should not be dispersed out of the equipment involved. In this study a density rate equation as well as the Stokes'equation has been proposed in order to obtain the theoretical terminal velocity of powders. The terminal velocity of U$_{3}$O$_{8}$ has been predicted by using the terminal velocity of SiO$_{2}$, and then determination has been the optimum air flow rate which is able to prevent powders from scattering. An equation which has shown a relationship between theoretical terminal velocities of U$_{3}$O$_{8}$ and SiO$_{2}$ has been derived with the help of the Stokes'equation, and then an experimental verification made for the theoretical Stokes' equation of SiO$_{2}$ by means of an experimental device made of acryl. The theoretical terminal velocity based on the proposed density rate equation has been verified by detecting U$_{3}$O$_{8}$ powders in a filter installed in the mock-up voloxidizer. As the results, the optimum air flow rates seem to be 20 LPM by the Stokes'equation while they are 14.5 L/min by the density rate equation. At the experiments with the mock-up voloxidizer, a trace amount of U$_{3}$O$_{8}$ seems to be detectable at the air flow rate of 14.5 L/min by the density rate equation, but U$_{3}$O$_{8}$ powders of 7$\mu$m diameter seem detectable at the air flow rate of 20 L/min by the Stokes'equation. It is revealed that 14.5 L/min is the optimum air flowe rate which is capable of preventing U$_{3}$O$_{8}$ powders from scattering in the UO$_{2}$ voloxidizer and the proposed density rate equation is proper to calculate the terminal velocity of U$_{3}$O$_{8}$ powders.

  • PDF

Analysis of vehicle progress before and after a collision using simulation (시뮬레이션을 이용한 충돌 전후 차량 진행궤적 분석)

  • Han, Chang-Pyoung
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.22 no.1
    • /
    • pp.402-408
    • /
    • 2021
  • Vehicle engineering analysis in the event of an accident caused by a car built on mechanical design has not been investigated in-depth but relies on the subjective experience knowledge of the investigator. This study analyzed the correlation between the speed, progress, steering, and braking before impact, which is consistent with the final stop position, by drawing a site situation chart using the CAD (CAD) program and repeating 250 crashes using the PC-Crash program. The following situations were investigated: lower impact velocity; greater impact speed of the vehicle, which is not affected significantly by the departure angle; higher vehicle speed, such as the effective impact velocity, after the impact; higher vehicle speed; and lower vehicle speed. (Ed note: I am unsure what you are saying here. It appears contradictory and not a complete sentence. Please check the changes.)The simulation results of this study identified the process of returning to the magnetic progression lane after recognizing the opposite porter while Mighty was carried out on the uphill left-curve section in a position that crossed the center line, and the collision of the porter's front left side, pushing the porter in the right diagonal direction and making the front stop towards approximately 11 o'clock.

Determination of Ultimate Biodegradability and Multiple Decay Rate Coefficients in Anaerobic Batch Degradation of Organic Wastes (유기성폐기물의 회분식 혐기성 최종생분해도와 다중분해속도 해석)

  • Kang, Ho;Shin, Kyung-Suk;Richards, Brian
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.27 no.5
    • /
    • pp.555-561
    • /
    • 2005
  • A new graphical method was developed to separate two distinctive decay rate coefficients($k_1$ and $k_2$) at their respective degradable substrate fractions($S_1 and $S_2$). The mesophilic batch reactor showed $k_1$ of $0.151\;day^{-1}$ for wasted activated sludge(WAS), $0.123\;day^{-1}$ for thickened sludge(T-S), $0.248{\sim}0.358\;day^{-1}$ at S/I ratio of $1{\sim}3$ for sorghum and $0.155{\sim}0.209\;day^{-1}$ at S/I ratio $0.2{\sim}1.0$ for swine waste, whereas their long term batch decay rate coefficients($k_2$) were $0.021\;day^{-1}$, $0.001\;day^{-1}$, $0.03\;day^{-1}$ and $0.04\;day^{-1}$ respectively. At least an order of magnitude difference between $k_1$ and $k_2$ was routinely observed in the batch tests. The portion of $S_1$, which degrades with each $k_1$ appeared 71% for WAS, 39% for T-S, 90% for sorghum, and $84{\sim}91%$ at S/I ratio of $0.2{\sim}1.0$ for swine waste. Ultimate biodegradabilities of 50% for WAS, 40% of T-S, $82{\sim}92%$ for sorghum, and $81{\sim}89%$ for swine waste were observed.

A visualization system of blood flow with laser doppler technique (레이저 도플러 현상을 이용한 혈류 속도 영상화 시스템)

  • Choe, Gyeong-Won;Yu, Mun-Jong;Kim, Yeong-Jun;Choe, Jong-Un
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2009.02a
    • /
    • pp.241-242
    • /
    • 2009
  • 도플러 효과를 이용해 피부의 혈류 속도 분포를 측정하였다. 고속 CMOS 이미지 센서를 사용하여 $256{\times}256$ 픽셀의 크기를 갖는 혈류 속도 영상을 측정하였다. 많은 의학 치료 분야에서 혈류 흐름에 대한 영상, 특히 모세혈관에서의 혈류 흐름에 대한 영상을 필요로 한다. 레이저 도플러 기술은 물체의 속도를 물체에 접촉하지 않고 측정할 수 있는 대표적인 기술로, 레이저 광의 코헤런트한 특성과 비접촉성 특성은 인체 피부의 혈류 속도를 측정하는데 좋은 특성을 제공한다.

  • PDF