• Journal of the Korean Data and Information Science Society
• /
• v.28 no.4
• /
• pp.783-796
• /
• 2017

In the theory of probability, a Bernoulli trial is a random experiment with exactly two possible outcomes, "success" and "failure", in which the probability of success is the same every time the experiment is conducted. In the successive games of scissors paper stone there exists the case of draw in each game. In this paper we are interested in the ultimate success probability of each participant and the expected number of the game till any one of the two has the ultimate victory. Using our results, we can calculate the ultimate winning probability of each player of the two players and the expected number of the game till any one of the two has the ultimate victory in any case whether there is draw or not in each game.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.158-158
• /
• 2012

기후시나리오는 시 공간 해상도가 낮아 결과를 직접적으로 활용하기에는 한계가 있다. 따라서 국내외적으로 지역기후모형(RCM)을 통해 고해상도 기후시나리오를 생산하여 각 분야의 영향평가 시 활용하고 있다. 그럼에도 불구하고 기후모형이 갖는 한계로 인하여 시나리오는 관측자료에 비해 과소모의되는 경향이 발생하기 때문에 이를 고려할 수 있는 편의보정 과정이 필요하다. 하지만 국내 외적으로 여러 편의보정기법이 존재하며, 편의보정기법 선정에 따라 최종 평가 결과에 영향을 미칠 수 있다. 특히 수문 분야에서 활용하기 위해 기후시나리오 중 가장 중요한 요건은 일단 관측치의 월 및 계절별 변동성이 잘 반영되는 가이며, 두 번째는 극한 사상(high, low)을 얼마나 잘 모의하여 홍수와 가뭄을 평가하는데 용이한 가이다. 따라서 본 연구에서는 기존 편의보정 기법의 불확실성을 평가하고, 이를 통해 수문학적 활용을 위한 고해상도 기후시나리오의 편의 보정 기법을 제안 및 적용성 평가를 수행하고자 한다. 기존 편의보정기법의 적용성을 평가하기 위해 Change factor method, Quantile mapping, Weather Generator 등을 이용하였다. 이를 위해 역학적으로 상세화된 기후시나리오와 기상청 관할의 기상관측소의 최고기온, 최저기온, 평균기온, 강수량 등의 기후 자료를 수집하였다. 평가를 위해 선정한 관측소 지점은 1951년부터 강수 및 기온 자료가 존재하는 기상청 관할 기상관측소를 토대로, 지역적인 평가를 위해 최종적으로 서울, 강릉, 대구, 부산, 목포, 광주, 전주, 울산, 추풍령을 선정하였다. 이 중 1956~1980년을 과거기간으로 1981~2005년를 미래기간으로 가정하고, 편의 보정 기법 적용하여 기온과 강수량의 통계적 특성을 비교 분석하였으며 평가결과, 편의보정 기법의 따른 한계점들을 도출하였다. 한계점들을 개선하기 위해 본 연구에서 제안한 편의 보정기법은 강수량을 크게 3단계(극한 호우사상, 강수일수, 평균 표준편차 보정)로 나누어 편의보정을 실시하는 것으로 극한 호우사상을 위해서는 연최대치 계열을 이용한 회귀식을 이용하여 보정하였고, 비초과확률을 이용하여 RCM 결과값의 강수일수를 보정하였다. 최종적으로 나머지 강수시나리오에 대해서 평균과 표준편차를 보정하여 최종시나리오를 생산 및 적용성을 평가하였다. 평가 결과, 기존 편의보정기법의 단점을 극복할 수 있었으며, 이를 통해 향후 수문학 분야에 적용하여 신뢰성 있는 기후변화 영향평가를 수행될 수 있을 것이다. 제안한 편의보정 기법 및 평가 결과에 대한 자세한 내용은 발표 시 제시하고자 한다.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.1-11
• /
• 2023

The purpose of this study is to develop a discussion-centered teaching and learning model for nurturing creative and convergence talents. Regarding the research method, a draft model on discussion-centered teaching and learning was devised, and the model was completed through expert validation. The final draft was revised and supplemented by verifying how valid the model was when applied in class by using the derived final draft. Compared with the draft on discussion-centered teaching and learning model, the final model focused on text-reading emphasis, methods of questioning, and question generation strategies, excluding jigsaw discussions. The discussion-centered teaching and learning model developed in this study is expected to help instructors foster creative and convergence talents. Three suggestions have been provided to effectively apply this model to the field. First, an attitude of listening and respect is required during a discussion. Second, a plan should be considered on how to induce active participation of learners participating in the discussion. Third, the importance of managing discussion time was emphasized.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.2
• /
• pp.169-176
• /
• 2019

The purpose of this study was to investigate attitudes toward aging and depression among elderly welfare facility users. For this purpose, a questionnaire-based survey was conducted with 280 elderly participants in the facilities of 15 institutions in Gyeonggi-do. In total, 258 data points were used for analysis. The measuring instruments used an attitude scale and depression scale for aging. The results of this study are as follows. First, there was no difference in attitude toward aging and depression among elderly welfare institution users by gender. Second, attitudes toward aging among elderly welfare facility users were also assessed according to final educational background. Positive attitudes in general (lack of depression) and positive attitudes toward aging were found to be higher with a higher rate of final academic completion. Third, attitudes toward aging were assessed according to experience with welfare facilities among the elderly, and it was found that depression has a significant impact on perceptions of physical change caused by aging. As a result, even when attitudes toward aging are generally negative, an elderly person cannot be judged to be depressed because this is highly related to final academic completion. Therapists working in welfare facilities for the elderly are more likely to have negative attitudes toward aging and depression when the number of facilities used is lower.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.2
• /
• pp.141-154
• /
• 1993

In this paper, a method to calculate the ultimate compressive strength of welded one-sided stiffened plates simply supported along all edges is proposed. At first initial imperfections such as distortions and residual stresses due to welding are predicted by using simplified methods. Then, the collapse modes of the stiffened plate are assumed and collapse loads for each mode are calculated. Among these loads, the lowest value is selected as the ultimate strength of the plate. Collapse modes are assumed as follows ; (1) Overall buckling of the stiffened plate$\rightarrow$Overall collapse due to stiffener bending (2) Local buckling of the plate part$\rightarrow$Local collapse of the plate part$\rightarrow$Overall collapse due to stiffener yielding (3) Local buckling of the plate part$\rightarrow$Overall collapse due to stiffener berthing (4) Local buckling of the plate part$\rightarrow$Local collapse of the plate part$\rightarrow$Overall collapse due to stiffener tripping. The elastic large deflection analysis based on the Rayleigh-Ritz method is carried out, and plastic analysis assuming hinge lines is also carried out. Collapse load is defined as the cross point of the two analysis curves. This method enables the utimate strength to be calculated with small computing time and a good accuracy. Using the present method, characteristics of the stiffener including torsional rigidity, bending and tripping can also be clarified.

• Journal of the Korean Geosynthetics Society
• /
• v.3 no.2
• /
• pp.23-29
• /
• 2004

One of the most important concern in the design of barrier layer in to protect the water through the landfill. The barrier layer consists of a single compacted clay liner(CCL) or a composite liner with high density polyethylene(HDPE). The construction of barrier layer at the edge of cover system usually has some problems because of steep slope in the landfill. In this study the authors evaluate the geosynthetic clay liner(GCL) as a barrier layer at the edge of the final cover system in landfill. The GCLs were simulated the stability of slope, the HELP(Hydrologic Evaluation of Landfill Performance) and the durability of environmental situation. As the results, the GCL has more stable than the CCL. Therefore, the authors suggest that the GCL in good for the barrier layer of the final cover system in the landfill.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.10 no.2 s.21
• /
• pp.41-47
• /
• 2004

Plate has cutout inner bottom and girder and Door etc. in hull construction absence is used much, and this is strength in case must be situated, but establish in region that high stress interacts sometimes fatally in region that there is no big problem usually by purpose of weight reduction, a person and freight movement, piping etc.. Because cutout‘s existence is positioning in this place, and, elastic bucking strength by load causes large effect in ultimate strength. Therefore, perforated plate elastic bucking strength and ultimate strength is one of important design criteria to decide structural elements size at early structure design step of a ship. Therefore, we need reasonable & reliable design formula for elastic bucking strength of the perforated plate. The author computed numerically ultimate strength change about several aspect ratios, cutout dimension, and plate thickness by using ANSYS Finite element analysis code based on finite element method in this paper.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.55-60
• /
• 2005

Plate that have cutout inner bottom and girder and floor etc. in hull construction absence is used much, and this is strength in case must be situated, but establish in region that high stress interacts sometimes fatally in region that there is no big problem usually by purpose of weight reduction, a person and change of freight, piping etc.. Because cutout's existence gnaws in this place, and, elastic buckling strength by load causes large effect in ultimate strength. Therefore, perforated plate elastic buckling strength and ultimate strength is one of important design criteria which must examine when decide structural elements size at early structure design step of ship. Therefore, and, reasonable elastic buckling strength about perforated plate need design ultimate strength. Calculated ultimated strength change several aspect ratioes and cutout's dimension, and thickness in this investigation. Used program applied ANSYS F.E.A code based on finite element method.

• Proceedings of KOSOMES biannual meeting
• /
• 2004.11a
• /
• pp.129-135
• /
• 2004

Plate has cutout inner bottom and girder and floor etc in hull construction absence is used much, and this is strength in case must be situated, but establish in region that high stress interacts sometimes fatally in region that there is no big problem usually by purpose of weight reduction, a person and change of freight, piping etc. Because cutout's existence gnaws in this place, and, elastic budding strength by load rouses large effect in ultimate strength. Therefore, perforated plate elastic budding strength and ultimate strength is one of important design criteria which must examine when decide structural elements size at early structure design step if ship. Therefore, and, reasonable elastic budding strength about perforated plate need design ultimate strength. Calculated ultimate strength change several aspect ratioes and cutout's dimension, and thickness in this investigation. Used program applied ANSYS F.E.M code based on finite element method

• Journal of Korean Library and Information Science Society
• /
• v.51 no.4
• /
• pp.211-230
• /
• 2020

The purpose of this study is to contribute to improving the efficiency of managing the database of the reports arising from the results of National R&D projects. To that end, the reports submitted by 49 agencies under the Ministry of Science and ICT were collected, and samples were selected for each institution. The samples and form of the final report and summary of the Enforcement Rule of the Framework Act on Science and Technology were compared, and the components and items to be entered were established. The final report's unique items were derived from the analysis of the state of connection with the National R&D information standard. The items to be entered are classified into major and optional according to their importance, and the location of the entry to be entered is suggested. If standardization of the elements and items is advanced as planned, it is expected to automate metadata extraction and improve the quality of report metadata when building a database.