• Journal of the Society of Disaster Information
• /
• v.12 no.4
• /
• pp.358-365
• /
• 2016

Micro dust is closely related to real life. Especially, the micro dust forecasting system is being implemented from February 2014. Reliability of data through air pollution monitoring network is important. The Ministry of Environment operates 506 air pollution monitoring networks (11 types) to analyze national air quality and establish air policies. However, there is not enough system to confirm and check the site suitability of the measurement site. Therefore, this study analyzes urban space using GIS. Assess the appropriateness and equity of air pollution measurement facilities. The final goal is to reflect the results of the analysis into the Seoul Metropolitan Air Pollution Monitoring Network Installation Plan.

• Proceedings of the Korean Society of Food and Cookery Science Conference
• /
• 2003.05a
• /
• pp.84-84
• /
• 2003

최근 젊은층의 서양후식 소비가 증가하는 경향에 맞추어 우리음식인 오미자편과 서양후식인 젤리를 접목한 우리실정에 맞는 오미자편 개발의 필요성을 느껴 반응표면 실험계획법으로 오미자편의 최적 레시피를 찾아내고 상품화를 시도하여 서양의 젤리와 경쟁력을 갓추어 보급하고자 본 연구를 실시하였다. 오미자편의 각 물성 측정치는 1차 선형효과에서 주로 pectin과 sucrose에 의해 영향을 받았고, 2차 곡선효과에서는 pectin $\times$ pectin이 탄력성, 점착성에 영향을 받았다. (중략)

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.154-154
• /
• 2009

경질 3가 크롬 도금액은 내적인 구성 조성물의 화학비나, 외적인 온도, 시간 등 여러 가지 실험인자들의 복잡한 작용으로 인해 어떤 인자가 어떠한 작용에 상호 영향을 미치는지 파악하기가 쉽지 않다. 통계 프로그램을 사용하여 실험계획법을 작성하고, 측정된 반응치료로부터 분석을 실시하여 최적경사경로를 도출하였다. 또한, 잔차분석과 호감도 함수를 이용한 최적화가 진행되었다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.9
• /
• pp.817-823
• /
• 2017

In the past, research has been conducted on the development of an adaptive cruise control algorithm considering fuel efficiency, and an adaptive cruise control system considering fuel efficiency have been developed. However, research on optimizing vehicle and adaptive cruise control parameters in order to maximize performances is insufficient. In this study, the design optimization of vehicle and control parameters considering fuel efficiency, trackability, ride comfort and safe distance is performed. This paper proposes performance measures of vehicle behavior and develops an adaptive cruise control system. In addition, based on the screening of vehicle parameters that significantly influence performances, kriging surrogate models are constructed through a sequential design of experiment, and kriging surrogate model-based design optimization is performed to maximize fuel efficiency and satisfy target performances.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.134-139
• /
• 2001

Laser scanners are widely used for reverse engineering and inspection of freeform parts in industry such as motors, electronic products, dies and molds. Due to the lack of measuring software and positioning device, the laser scanning processes have been erroneous and inconsistent. In order to automate measuring processes, an automated scan plan generation software and a proprietary hardware are developed. In this paper, an automated laser scanning system using a 3-axis motorized stage is proposed. In the scan planning step, scan directions, paths, and the number of scans are generated considering optical and mechanical parameters. In the scanning step, the generated scan plan is downloaded into the laser scanner and the motorized stage and the points on the surface are captured automatically. Finally, the point data set is analyzed to evaluate the performance of the system.

• Elastomers and Composites
• /
• v.41 no.1
• /
• pp.3-9
• /
• 2006

Optimal conditions for preparation of starch/PVA blends were investigated with the consideration of factors that may influence mechanical properties of the blends. Multiplex mixture optimal method as a statistical method were performed and then tensile strength, strain at break, Young's modulus and tear strength of films of the blends were measured to determine the optimal conditions for preparation. The mechanical properties needed for the degradable agricultural mulch were the target of this experiment. Results showed that although the strain at break was a little insufficient, the other properties were very close to the target. This means that the mechanical properties of the film from this blend as a whole are very compatible with those of the reference mulch.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.189.1-189
• /
• 2003

‘부유’단감은 국내에서는 일반화되어 있는 PE필름 밀봉 저장방식으로 과실의 호흡에 의해 산소농도의 감소와 이산화탄소의 증가로 호흡이 억제되고 이에 따라 노화가 지연됨으로 과실의 저장수명을 증가시키는 방식이며, 최적저장온도는 -0.5~$0^{\circ}C$라고 보고되고 있다. 이에 본 실험에서는 상온유통을 고려하여 2$0^{\circ}C$에서 0.03mm, 0.05mm LDPE필름으로 포장한 경우와 무포장한 경우를 비교하여, 중량, 수소이온농도, 가용성고형분, 경도를 측정하고 이를 외관품질검사 결과와 종합적으로 검토하였으며, 또한 환경기체조성의 범위를 설정하기 위하여 산소농도(1~5%), 이산화탄소농도(5~15%)를 독립변수로 중심합성계획법(central composite design)에 의해 3단계로 부호화하였고 산소소비농도, 이산화탄소 발생속도, pH 당도, 경도를 종속(반응)변수로 결과를 이용하여 독립변수와 종속변수간의 함수관계를 규명하며, 독립변수들의 값의 변화에 따라서 반응량(종속변수)이 어떻게 달라지는 가를 예측하며, 독립변수가 종속변수인 반응량을 최적화(Optimize) 하는가와 어떤 실험계획법을 쓰면 가장 좋은 정도를 얻을 수 있는지를 규명하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1177-1178
• /
• 2015

국내 전력설비는 70년대 이후 제3차 경제개발 5개년 계획에 따라 중화학공업의 발전과 함께 급속히 성장해왔다. 과거 개발 위주의 산업구조에서 급속히 팽창한 전력설비는 21세기에 들어서면서 30~40년 장기 사용에 따른 노후화가 진행되었고, 증가하는 전력수요에 대응하기 위한 발전 및 송전 용지 확보의 어려움으로 인하여 전력설비의 신규 증설에 많은 어려움을 격고 있는 실정이다. 따라서 전력설비의 안전성과 신뢰성을 확보하기 위해 적절한 교체시기 선정 및 최적의 자산관리 필요성에 대해서 최근 관심을 가지기 시작하였고, 이러한 전력설비의 최적 자산관리에 핵심적인 전력설비의 상태평가 기술의 발달로 과거 시간기준의 유지보수(Time Based Maintenance)에서 최근 노후설비의 증가와 진단기술의 발달에 따른 예방보전(Preventive Maintenance)에 의한 상태기준 유지보수(Condition Based Maintenance)개념으로 전환되고 있다. 고전압 회전기기(발전기, 전동기)의 상태평가를 위한 핵심기술인 Off-line 부분방전시험이 널리 적용되고 있으며, 본 논문에서는 부분방전 측정 시험 시 대상설비 단자부의 인출케이블에 의한 감도저하 현상에 대해 고찰 하였다.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.7
• /
• pp.50-61
• /
• 1999

\In this paper, we consider the optimal scheduling of detection and tracking parameters in phased array radars to minimize the radar energy required for track maintenance in a cluttered environment. We develop a mathematical model of target detection induced by a search process in phased array radars. In the mathematical development, we take into account the effect of unwanted measurements that may have originated from clutter or false alarms in the detection process. We use and analytic approximation of the modified Riccati equation of the probabilistic data association (PDA) filter to take into account the effect of clutter interference in tracking. Based on the search process and the tracking models, we formulate the optimal scheduling problem into a nonlinear optimal control problem. We solve a constrained nonlinear optimization problem to obtain the solution of the optimal control problem.

• Journal of Aerospace System Engineering
• /
• v.13 no.1
• /
• pp.29-37
• /
• 2019

The objective of this study was to investigate the influence of the blade shape on the impeller performance, for design optimizing of the high airflow impeller. First, the quantity, angle, and length of blades, which are considered to have a large influence on the impeller performance, were selected as design variables. Then, 27 cases of impeller shapes were selected according to the design of experiment (DOE). To predict the conduct of the blower based on the selected impeller shape, flow analysis was performed using the immersed solid method of ANSYS CFX. In the CFD results, the highest airflow was expected in the impeller having a combination of 50 EA, $6^{\circ}$ and 5 mm. Finally, a blower with the original impeller shape and the optimized impeller shape was fabricated using a 3D printer, and the analysis tendency and experimental tendency were verified through experiments.