• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.4
• /
• pp.251-257
• /
• 2014

This research is focused on coagulation and sand filtration process as a pretreatment of RO seawater desalination. RO systems require sufficient and reliable pretreatment process to produce superior quality of RO feedwater that can mitigate RO membrane fouling. This experiment was conducted to investigate the effectiveness of coagulation and filtration process under various experimental conditions including different coagulant dose, flocculation mixing intensity and time, turbidity, and filtration rate. The experimental results showed that the optimum pretreatment conditions resulting in lower SDI value suitable for RO feedwater were coagulation pH 6.5, raw water turbidity greater than 4 NTU, and media bed depth greater than 550 mm. However, flocculation mixing intensity, coagulant dose, and filtration rate relatively affected little on the filtration efficiency.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.5 s.305
• /
• pp.19-28
• /
• 2005

Real surround viewing conditions in watching the color display devices such as TV and PC monitor are quite different from the standard viewing conditions. Human visual system is adapted chromatically under the different viewing conditions in luminance levels and chromaticity of illuminants. Accordingly, the reproduced colors of the same chromaticity will appear as quite different color. Therefore, it is necessary that the displayed colors are reproduced to be appeared as the original colors in the standard viewing conditions. In this paper, we propose a chromatic adaptation model for the variations of the surround illuminants' chromaticity under the same luminance conditions. In proposed chromatic adaptation model, we calculate each gain of L, M, and S as nonlinear functions according to the chromaticity of the surround illuminants. And the optimal coefficients are obtained from the corresponding colors data of the Breneman's experiments. The proposed chromatic adaptation model is compared with the conventional chromatic adaptation models. In the experimental results, the proposed model has very good performance in the whole range of luminance levels. We also experimentally confirmed that the reproduced corresponding colors using the proposed chromatic adaptation are appeared as the original colors when the real surround viewing conditions are different from the standard viewing conditions.

• The Korean Journal of Mycology
• /
• v.30 no.1
• /
• pp.11-17
• /
• 2002

This experiment was carried out to study formation of fruitbody with Cordyceps scarabaeicola (EFCC C-252) isolate. This isolate was the one of best fruitbody formation on brown rice 60 g plus 30 g silkworm pupa media among EFCC C-251, EFCC C-252, EFCC C-1092 from EFCC (Entomopathogenic Fungal Culture Collection) of Kangwon National University. Fruiting body was formed only isolate EFCC C-252 among tested isolates on the medium of brown rice (60 g) and silkworm pupae (30 g). The optimal temperature and light for fruiting body formation were $25^{\circ}C$ and fluorescent light (300 lux). The maximal fruiting body formation was observed at 70 g of brown rice and 80 g of silkworm pupa medium which was treated separately. Fruiting body was formed maximally by 2 days interval of irrigation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.166-166
• /
• 2013

최근에 희토류 이온이 도핑된 형광체를 발광 소자, 레이저, 섬광재료, 광섬유, 촉매, 디스플레이와 같은 다양한 분야에 응용하기 위한 연구에 상당한 관심이 집중되고 있으며, 희토류 이온이 도핑된 발광 물질은 음극선관, 램프 조명, 플라즈마 디스플레이, X선 검출기, 전계 방출 디스플레이 소자를 포함한 다양한 영역에 응용되고 있다. 본 연구에서는 고상 반응법을 사용하여 발광 효율이 높은 적색과 주황색 형광체를 제조하고자 서로 다른 활성체 이온 Eu3+, Sm3+의 농도를 변화 시키면서 두 종류 Ca1-1.5xTa2O6:Eux3+와 Ca1-1.5xTa2 O6:Smx3+ 형광체 분말을 합성하였다. 특히, 활성제 이온의 농도비에 따른 형광체 분말의 결정 구조, 표면 형상, 입자의 크기, 흡광과 발광 특성을 측정하였다. 그림은 활성체 이온의 함량비를 달리하여 합성한 Ca1-1.5xTa2O6:Eux3+, Ca1-1.5xTa2O6:Smx3+ 형광체 분말에서 측정한 흡광(photoluminescence excition) 스펙트럼의 결과를 나타낸 것이다. 여기 파장 399 nm로 여기 시킨 Ca1-1.5xTa2O6:Eux3+ 형광체 분말의 경우에, 발광 세기가 가장 강한 617 nm의 주 피크가 관측되었다. 또한, 여기 파장 410 nm로 여기 시킨 Ca1-1.5xTa2O6:Smx3+ 형광체 분말의 경우에는 발광 세기가 가장 강한 주 피크는 609 nm에서 나타났다. 실험 결과로부터, Eu3+와 Sm3+ 이온이 각각 도핑된 CaTa2O6 형광체의 경우에는 색 순도가 높은 파장과 발광 세기는 Eu3+ 이온인 경우에 0.15 mol, Sm3+ 이온이 도핑되는 경우에는 0.05 mol이 최적의 합성 조건임을 알 수 있었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.333-338
• /
• 2021

This study determined the characteristics of LED illumination and photosynthetically active radiation flux density (PPFD) for LED lighting design in an indoor plant factory. This was done based on the light wavelength and PPFD intensity required for plant growth. It has been found that the wavelength and intensity are decreased according to the measuring distance, and green light has an important role in illumination characteristics, while blue light has an important role in the PPFD characteristics. Considering only the photosynthetic properties of plants, the effective order of photosynthesis was blue>red>white>green. When the measurement distance was 30 [cm], it was found that reduction levels of 60 [cm], 90 [cm], and 120 [cm] decreased to about 36 [%], 18 [%], and 10 [%], respectively. As a result of the characteristics of mixed light (red:blue=2:1, 3:1, 4:1) and the measurement distance, when the measured value at 30 [cm] is 100%, the measured value at 120 [cm] is 10-11 [%]. From the obtained results, an optimal structure was proposed for maximizing the light efficiency of an indoor greenhouse for future research.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.7
• /
• pp.6-13
• /
• 2006

Tin doped indium oxide(ITO) and Al doped zinc oxide(ZnO:Al) films, which are widely used as a transparent conductor in optoelectronic devices, were prepared by using the capacitively coupled DC magnetron sputtering method. ITO and ZnO:Al films with the optimum growth conditions showed each resistivity of $1.67{\times}10^{-3}[{\Omega}-cm],\;2.2{\times}10^{-3}[{\Omega}-cm]$ and transmittance of 89.61[%], 90.88[%] in the wavelength range of the visible spectrum. The two types of 5 inch-PDP cells with ZnO:Al and ITO transparent electrodes were made under the same manufacturing conditions. The PDP cell with ZnO:Al film was optimally operated in the mixing gas rate of Ne(base)-Xe(8[%]), and at gas pressure of 400[Torr]. It also shows the average measured brightness of $836[cd/m^2]$ at voltage range of $200{\sim}300$[V]. Luminous efficiency, one of the key parameter for high brightness and low power consumption, ranges from 1.2 to 1.6[lm/W] with increasing frequency of ac power supplier from 10 to 50[Khz]. The brightness and luminous efficiency are lower than those with ITO electrode by about 10[%]. However, these values are considered to be enough for the normal operation of PDP TV.

• Journal of Energy Engineering
• /
• v.8 no.4
• /
• pp.567-575
• /
• 1999

This study found potential ability to generate electric power using difference in water temperature between sea surface water and deep water in the East Sea which includes the East Sea Proper Water with the temperature less than 1$^{\circ}C$ throughout a year without seasonal variation. To quantify the difference in water temperature between sea surface water and deep water in the East Sea. We computed the annual mean ($^{\circ}C$), the annual amplitude ($^{\circ}C$), the annual phase (degree) and the duration time which showed more than 15$^{\circ}C$ temperature difference from the water temperature data using Harmonic analysis during 1961~1997. The best place for generating electric power in the East Sea seems to be the eastward ocean areas (36$^{\circ}$ 05'N, 129$^{\circ}$ 48'E~36$^{\circ}$ 05'N, 130$^{\circ}$ 00E'E) from Pohang city. The annual mean of the difference in water temperature between sea surface water and 500 m depth was 24$^{\circ}$C at the place to generate electric power in August according to the data of 1961~1997. the maximum duration periods with more than 15$^{\circ}C$ temperature difference were 215 days (5/5-12/10) a year in the place mentioned electricity with a stable plan. In the East Sea coastal areas of the Korean peninsula, the average minimum depth to reach the East Sea Proper Water from surface water is 300 m and fluctuates between 250 m and 350 m throughout a year. Further studies could be needed for the utilization of cold water, such as the East Sea Proper Water for energy conversion.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.420-424
• /
• 2016

In this study, we developed photocatalytic technology to address the emerging serious problem of air pollution through indoor air cleaning. A single layer of $WO_3$ was prepared by using the dry process of general RF magnetron sputtering. At a base vacuum of $1.8{\times}10^{-6}$[Torr], the optical and electrical properties of the resulting thin films were examined for use as a transparent electrode as well as a photocatalyst. The single layer of $WO_3$ prepared at an RF power of 100 [W], a pressure of 7 [mTorr] and Ar and $O_2$ gas flow rates of 70 and 2 sccm, respectively, showed uniform and good optical transmittance of over 80% in the visible wavelength range from 380 [nm] to 780 [nm]. The optical catalyst characteristics of the $WO_3$ thin film were examined by investigating the optical absorbance and concentration variance in methylene blue, where the $WO_3$ thin film was immersed in the methylene blue. The catalytic characteristics improved with time. The concentration of methylene blue decreased to 80% after 5 hours, which confirms that the $WO_3$ thin film shows the characteristics of an optical catalyst. Using the reflector of a CCFL (cold cathode fluorescent lamp) and the lens of an LED (lighting emitting diode), it is possible to enhance the air cleaning effect of next-generation light sources.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.10
• /
• pp.27-35
• /
• 2023

In this paper, we propose a process of increasing productivity by applying a deep learning-based defect detection and classification system to the prepreg fiber manufacturing process, which is in high demand in the field of producing composite materials. In order to apply it to toe prepreg manufacturing equipment that requires a solution due to the occurrence of a large amount of defects in various conditions, the optimal environment was first established by selecting cameras and lights necessary for defect detection and classification model production. In addition, data necessary for the production of multiple classification models were collected and labeled according to normal and defective conditions. The multi-classification model is made based on CNN and applies pre-learning models such as VGGNet, MobileNet, ResNet, etc. to compare performance and identify improvement directions with accuracy and loss graphs. Data augmentation and dropout techniques were applied to identify and improve overfitting problems as major problems. In order to evaluate the performance of the model, a performance evaluation was conducted using the confusion matrix as a performance indicator, and the performance of more than 99% was confirmed. In addition, it checks the classification results for images acquired in real time by applying them to the actual process to check whether the discrimination values are accurately derived.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.170-170
• /
• 2013

형광체를 조명과 디스플레이 산업에 응용하기 위해서는 충분히 밝은 빛을 제공하는 형광체의 발광 세기가 중요한 변수이다. 이러한 발광 특성은 주로 모체 격자에 도핑 되는 활성제의 농도, 입자의 형상과 크기 분포의 균일성, 결정성에 따라 달라진다. 본 연구에서는 Ca2SiO4 모체 결정에 도핑한 활성제 Eu3+와 Dy3+ 이온의 농도를 변화시키면서 고상 반응법을 사용하여 높은 발광 효율을 갖는 Ca2-1.5xSiO4::Eux3+ 적색 형광체와 Ca2-1.5xSiO4:Dyx3+ 백색 형광체를 합성하였다. 특히, 활성제 Eu3+와 Dy3+ 이온 농도의 변화가 형광체의 결정 구조, 소성 온도, 입자의 표면 형상, 광학 스펙트럼의 발광 효율에 미치는 영향을 조사하여 최적의 합성 조건을 결정하였으며, 회절 신호의 반치폭과 발광 세기의 상호 관계를 조사하였다. Ca2-1.5xSiO4::Eux3+와 Ca2-1.5xSiO4:Dyx3+ 형광체 초기 분말 시료는 CaO (99.9% 순도), SiO2 (99.9%), Dy2O3 (99.9%)와 Eu2O3 (99.9%)인 화학 물질을 구입하여 초정밀 저울로 화학양론적으로 측정하였다. 이때 Eu와 Dy의 함량비는 x=0, 0.01, 0.05, 0.1, 0.15, 0.2 mol로 변화 시키면서 합성하였다. Ca2-1.5xSiO4: Dyx3+ 형광체 분말 시료의 경우에 소결 온도를 각각 $1000^{\circ}C$와 $1100^{\circ}C$로 달리하여 흡광과 발광 스펙트럼의 세기를 비교해 본 결과, 서로 다른 두 소결 온도에서 합성한 두 형광체 분말은 동일하게 Dy3+의 몰 비가 0.05 mol일 때 주 발광 스펙트럼의 세기는 최대값을 나타내었다. 파장 355 nm로 여기시킨 Dy3+ 함량비에 따른 Ca2-1.5xSiO4:Dyx3+ 형광체 분말의 발광 스펙트럼은 Dy3+ 함량비에 관계 없이 581 nm에서 가장 강한 황색 발광을 보였다. 함량비가 증가함에 따라 발광 스펙트럼의 변화가 관측되었는데, Dy3+의 몰 비가 0.01 mol~0.05 mol인 영역에서는 발광 세기가 증가하여 0.05 mol에서 최대를 나타내다가 Dy3+의 몰 비가 더욱 증가함에 따라 발광세기는 현저히 감소하는 경향을 나타내었는데, 이 현상은 농도 소광 현상으로 해석 할 수 있다. 이외에도, Eu3+와 Dy3+ 이온의 함량비와 소결 온도가 결정 입자의 크기와 흡광 스펙트럼에 미치는 결과를 조사하였다.