• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.698-701
• /
• 2011

Over recent several years, researches for the less sensitive gun propellant development have been carried out with promising the product of propellants which have temperature independent characteristics using the new energetic plasticizing mixture as Di-nitro-diaza-alkanes. During this study, the promising propellant formulation having temperature ballistic properties as well as better behaviors concerning the cold brittleness of the materials was confirmed by results in tests of a closed bomb and 40mm Gun firing. On-going research on the optimized shape, formulation and processes of the propellant is progressing. From now on it should be done present study to establish the better composition and processes.

• Journal of Mushroom
• /
• v.3 no.1
• /
• pp.24-30
• /
• 2005

To study the cultural characteristics and wood rotting ability of the secondary mycellia of Armillaria mellea, it was cultivated on the various media. The optimal mycelial growth condition was 20~27 and pH 5.0~6.5 on PDB. A. mellea grew well on MEA, PDA and GP. Lactose and mannitol as carbon sources and glutamic acid as nitrogen sources were found to be effective as additives. A. mellea employed in this study have the characteristics of white rot types. Pine and oak wood were selected as candidates for sawdust substrate.

• Solar Energy
• /
• v.10 no.3
• /
• pp.35-45
• /
• 1990

An analytical equation to estimate the Rankine power cycle efficiency at maximum power for the given mass flow rates of heating and cooling fluids is derived. The accuracy of the result is shown by comparing the analytical values with those calculated one using detailed thermodynamic data. The results indicate that the thermal efficiency at maximum power depends primarily on the initial temperatures of the heating and cooling fluids, and it also depends on the pinch-temperature differences between the working fluid and the heating and cooling fluids. The efficiency at maximum power provides a measure of the power available in a practical Rankine heat engine.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.5
• /
• pp.42-49
• /
• 2007

This paper introduces a study on reliability-driven device placement using simulated annealing algorithm which can be applicable to MCM or electronic systems embedded in a spacecraft running at thermal conduction environment. Reliability of the unit's has been predicted with the devices' junction temperatures calculated from FDM solver and optimized by simulated annealing algorithm. Simulated annealing in this paper adopts swapping devices method as a perturbation. This paper describes and compares the optimization simulation results with respect to two objective functions: minimization of failure rate and minimization of average junction temperature. Annealing temperature variation simulation case and equilibrium coefficient variation simulation case are also presented at the two respective objective functions. This paper proposes a new approach for reliability optimization of MCM and electronic systems considering those simulation results.

• Korean Journal of Food Science and Technology
• /
• v.12 no.3
• /
• pp.176-181
• /
• 1980

Yeast invertase was immobilized on the 2 kinds of matrices : one is an indirectly coupled enzyme to the cyanogen bromide activated Sepharose by using ${\omega}-aminohexyl$ group as an extension arm, and the other is a tightly adsorbed enzyme on the modified hydrophobic cellulose derivative which has a phenoxyacetyl group as a linkage. The enzyme preparation coupled on Sepharose retained 26.0% of the original activity against sucrose as a substrate, while the preparation immobilized on phenoxyacetyl cellulose retained 72.9% . The immobilized invertase preparation on ${\omega}-aminohexyl$ Sepharose showed the optimal pH 4.5, optimal temperature $60^{\circ}C$, activation energy $5,941\;cal/mole{\cdot}deg$ and Km' 22.2 mM against sucrose, while the preparation adsorbed on phenoxyacetyl cellulose showed the optimal pH 4.0, optimal temperature $60^{\circ}C$, activation energy $7,769\;cal/mole{\cdot}deg$ and Km' 69.9 mM.

• Proceedings of the Korean Fiber Society Conference
• /
• 1996.10a
• /
• pp.513-517
• /
• 1996

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2003.10a
• /
• pp.56-60
• /
• 2003

폐 적층세라믹콘덴서(MLCC)로부터 Ni을 회수하기 위하여 침출실험을 수행하였다. 침출용매로 $HNO_3,\;HCl\;H_2SO_4$을 사용하여 시간의 변화, 반응온도의 변화, 시료 입도와 광액농도의 변화가 Ni의 침출율에 미치는 영향과 최적 침출 조건을 조사하였다. 그 결과 HCl, $H_2SO_4$을 침출용매로 사용했을 때 Ni 침출의 최적 조건은 산농도 5M, 반응온도 $90^{\circ}C$나타났으며, $HNO_3$을 침출용매로 사용했을 때 최적 침출 조건 산농도 1M, 반응온도 $70^{\circ}C$에서 광액농도 500ml당 20g일때 Ni 침출율이 98%로 최대였다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1996.10b
• /
• pp.77-80
• /
• 1996

우리나라에서 피크부하용으로 사용하는 복합발전이 하계시에서 외기온도가 상승함에 따라 실제로는 정격출력을 내지 못하고 있다. 따라서 본 연구에서는 연료(LNG)의 냉열을 이용하여 가스터빈의 연소용공기를 냉각시킬 경우, 복합발전 시스템의 성능변화를 분석하기 위하여 시뮬레이션을 수행하였다. 그 결과 LNG의 냉열을 이용하여 연소용공기를 원하는 온도까지 냉각시킬 수 있음을 확인할 수 있었다. 또한 연소기로 연료를 투입하기전에 설계온도까지 예열시키는 열교환기를 통해 배기가스에 함유된 현열을 더욱 많이 회수하면서, 가스터빈 투입연료의 온도를 상승시킬 수 있어, 시스템효율이 더욱 상승함을 알 수 있었다. 결론적으로 외기온도가 변하는 경우에, 본 시스템의 도입을 위해서는 경제성분석과 더불어 열교환기 시스템의 최적합성이 추후 진행되어야 할 것이며, 이를 통해 최적의 발전시스템을 구성할 수 있으리라 생각된다.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.4
• /
• pp.3-10
• /
• 1999

Investigations of temperature differences between both cnds of thermoacoustic exchanger generated by acoustic heat transport have been carried out as a function of the position of TAC(Thermo-Acoustic Couple)[1] in a 68-cm-long duct. Fixed with the electric power at 50W, measurements were compared with the theory changing the frequency from 150Hz to 300Hz with 10Hz step. The frequency-position dependent distribution of temperature difference corresponding to the Q-values was obtained with the numerical simulation. Through this distribution, the optimum position of the thermoacoustic exchanger and the optimum driving frequency can be determined.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.251-251
• /
• 2004

이 연구에서는 주단조 공정을 자동차 부품인 low control arm 제조에 적용하였다. Al6061에 주단조 공정을 적용함므로써 재료비 감소와 기존의 스틸제품보다 경량화 효과를 얻을 수 있다는 것을 증명하기 위함이다. 첫째로 단조 재료인 A16061의 최적 주조조건을 찾기 위하여, 주조 실험은 알루미늄의 주입온도, 금형온도, 주입시간을 조절함으로써 수행되어졌다. 최적주조조건은 주입온도 $700^{\circ}C$, 금형온도 30$0^{\circ}C$, 주입시간 10초로 정하여졌다. 각각의 미세조직을 관찰하고 응력-변형률곡선을 구하기 위하여 열가단조실험은 빌렛온도, 변형률속도와 감소율을 기초로 하여 수행되어졌다.(중략)