• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.69.1-69.1
• /
• 2018

산업 현장에서 자주 사용되는 알루미늄 합금은 순도가 높은 알루미늄에 비해 경제성, 기계적 성질이 우수한 장점이 있다. 하지만 이런 합금들은 물리적, 화학적 성질이 순수 알루미늄과 달라 양극산화와 같은 표면처리가 쉽지 않다. 양극산화는 표면처리 기술의 대표적인 방법 중 하나로 인위적으로 산화피막을 형성하는 기술이다. 순도가 높은 알루미늄은 산성 전해질에서의 양극산화를 통해 다공성 산화피막을 형성할 수 있으며 그 구조로 인해 내식성, 내마모성 등 기계적, 화학적인 다양한 장점이 있다. 하지만, Mg, Si, Cr과 같은 성분이 함유된 알루미늄의 경우 산성 전해질에서 산화물을 형성되지 않는다. 본 연구에서 기존의 산성 전해질에서의 양극산화 방법이 아닌$K_2HPO_4$를 함유하는 고온의 글리세롤 전해질을 사용하여 양극산화를 진행하였다. 사용한 알루미늄은 산업용으로 자주 사용되는 3000계열의 알루미늄을 사용하였으며 균일한 양극산화를 위해 샌드페이퍼를 통한 연마과정을 통해 표면을 평탄화 하였다. 이후 전기화학적 에칭 과정을 거쳐 표면에 있는 자연산화막을 제거하여 표면 분석을 용이하게 하였다. 양극산화는 10wt%의 $K_2HPO_4$/글리세롤 전해질에서 전해질의 온도와 인가 전압을 달리 하여 진행하였다. 결과 $150^{\circ}C$ 이상의 온도에서 알루미늄 합금의 양극산화를 확인할 수 있었고 $170^{\circ}C$의 온도에서 인가 전압을 20V로 하였을 때 가장 정렬된 다공성 구조를 얻을 수 있었다. 본 연구 결과를 통해 산업용 알루미늄 합금의 양극산화를 통해 다공성 나노구조 산화물을 형성 시킬 수 있었다.

• The Journal of Natural Sciences
• /
• v.13 no.1
• /
• pp.35-50
• /
• 2003

Granular clay minerals for adsorption of the organic dye prepared a Na-Bentonite and optimum condition calcined temperature $700^{\circ}C$ and polyvinyl alcohol quantity was 25%. Granular clay mineral stable range was pH3 to pH9 and specific area was $83m^2/g$. The adsorption of the organic dye on the Granular clay mineral showed result good adsorption with acid medium and then enthalpy was -3.36 ~ -0.84 kcal/mol. It was exhibit typical physical adsorption.

• Korean Journal of Microbiology
• /
• v.36 no.2
• /
• pp.112-118
• /
• 2000

A new gene encoding an acidophilic TEX>$\alpha$-amylase of Bacillus cil-culans KCTC3004 was cloned into Eschericlzia coli using pUC19 as a vector. The gene localized in the 5.8 kb PstI DNA fragment was expressed independently of its orientation in the cloning vector showing enzyme activity about 40 times greater than that produced by the original B, circulans The optimum pH and temperature of the cloned enzyme were pH 3.6 and 45^{\circ}C.$ respectively. The enzyme hydrolyzed starch to produce maltotriose and maltooligosaccharides. The SDS-PAGE and zymopram of the enzyme produced in E coli(p.4L850) indicated a molecular weight of 55,000.

• Resources Recycling
• /
• v.6 no.4
• /
• pp.31-37
• /
• 1997

The Mg-ferrite powders were recovered from acid leaching Mg waste by hydrothermal method. Recovering conditions ofMg-Ferrite were investigated m this system and the powders prepared were characterized, using X-ray analysis, chemicalanalysis, SEM. TEM, and VSM. In this study, pH of solution and the kind of neutralizer wcre important factors on thecharacteristics of the product. The optimum condition of recovering MgPenite was the mole ratio of Fe" : Mg"=2'1, reactiontemperature : ZOWC, reaction time.lhr, at pH=lZ, and Oi partial pressure af 2000 psi. And the powders ~ccovered have amonodispersed and spherelike shapes with the narrow sue distribulion.ow sue distribulion.

• Journal of Life Science
• /
• v.17 no.6 s.86
• /
• pp.798-804
• /
• 2007

A Actinomycetes F-97 producing tyrosinase inhibitor was isolated from soil samples. The optimum culture condition for 쇼rosinase inhibitor production was investigated and the results were as follows. The best carbon source for tyrosinase inhibitor production was shown as soluble starch, the optimum concentration was 3.0%. The best nitrogen source for tyrosinase inhibitor production was shown as peptone, the optimum concentration was 0.36%. As effect of metal ions on the production of tyrosinase inhibitor, K$_2$HPO$_4$ was shown the best and the optimum concentration was 0.1 mM. The optimum pH and temperature was shown 7.0 and 30${\circ}$C, respectively. And the highest tyrosinase inhibitor production was observed at 70hr cultivation under optimum conditions in jar fermentor scale.

• Economic and Environmental Geology
• /
• v.39 no.1 s.176
• /
• pp.75-82
• /
• 2006

Acid drainage occurs when sulfide minerals are exposed to an oxidizing environment. The objective of this study was to examine the optimum condition for creating a phosphate coating on standard pyrite surfaces for reduction of pyrite oxidation. The solution of $10^{-2}M\;KH_2PO_4,\;10^{-2}M\;H_2O_2$ was identified as the best phosphate coating agent for the reduction of pyrite oxidation. The formation of an iron phosphate coating on pyrite surfaces was confirmed with ore microscope and scanning electron microscope equipped with energy dispersive spectroscopy. The temperature did not significantly affect the formation of phosphate coating on the surface of pyrite. However, the phosphate coating was less stable at higher temperature than at lower temperature. The phosphate coating was quitely stable at wide range of pH and $H_2O_2$ concentration. The less than $3.4\%$ of phosphate was dissolved at pH 2.79 and 10.64 and less than $1.0\%$ of phosphate was dissolved at 0.1M $H_2O_2$. On the basis of these results, the phosphate coating can effectively reduce the negative environmental impact of acid rock drainage.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.12
• /
• pp.705-711
• /
• 2015

Degradation of 2,6-Dichlorophenol (DCP) using liquid ferrate(VI) synthesized by wet oxidation method has been studied. Several parameters such as pH (acid, base and neutral), DCP initial concentration, ferrate dosage, and temperature have been examined to determine the optimal experimental conditions. The ferrate(VI) has useful properties such as strong oxidizing power and selectivity and generates a non-toxic end product, Fe(III). Ferrate ion reduced rapidly to Fe(III) and oxygen in acidic and neutral conditions. The experimental results showed the higher DCP degradation efficiency in the neutral condition than in the acidic and basic conditions. The oxidation of DCP strongly depended on the dosage of ferrate added to the reactor and DCP initial concentration. With increasing of ferrate dosage the degradation efficiency of DCP increased, while the degradation efficiency of DCP decreased with increasing of DCP initial concentration. The effect of temperature has been tested at 4 different levels (10, 25, 35, and $50^{\circ}C$). The optimal temperature was obtained in $25^{\circ}C$ and degradation efficiency decreased as the temperature increased in the range from $25^{\circ}C$ to $50^{\circ}C$. The DCP degradation pathways were studied and proposed based on the intermediate products identified by GC/MS analysis.

• Culinary science and hospitality research
• /
• v.21 no.2
• /
• pp.119-129
• /
• 2015

In this study, rice bran containing biologically active substances, including oryzanol and dietary fiber, Korean food industry was used in glutinous rice Takju(a cloudy Korean rice wine) fermentation. During fermented in rice wine, four different amounts of defatted rice bran(0, 3, 6, and 10g) were formulated in a recipe and fermentation characteristics, physicochemical properties, and sensory characteristics of product were analyzed. An increase in the amount of defatted rice bran was witnessed by heightened pH values in the fermentation period. The titratable acidity of sansung takju was increased with high levels of defatted rice bran. The titratable acidity of defatted rice bran takju during the fermentation period significantly was decreased, and then increased. FRAP radical-scavenging activity of TDT6 2.56 g/moL, compare with the control group, showed the highest reducing power. The results of the sensory evaluation showed that overall-acceptability had the highest scores in the sansung takju containing TDT3(3%) level of defatted rice bran. In conclusion, sansung takju added with TDT3(3%) of defatted rice bran is rated most prefrence in the four groups in this parts quality and acceptability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6425-6431
• /
• 2015

Invertase, that hydrolyzes sucrose into glucose and fructose, plays a great role in carbohydrate reallocation between the photosynthetic source tissue and various sink tissues. Invertase also occurs in a variety of isoforms for various functions in plants. Insoluble invertases were extracted only in buffer solutions containing high concentrations of salt. Within these classes, acid invertase has an optimum activity at acidic pH (pH 4-5). Induction of insoluble acid invertase (INAC-INV) in leaf, stem, and root tissues in response to physical wounding has been investigated. To detect the localization of INAC-INV within the plant, immunolocalization has been performed. In this study, the accumulation of INAC-INV was noticeable to reach maximum levels on 72 hr after mechanical injuries. INAC-INV was induced in wounded leaves 3 times more than control leaves. Immunolocalization results showed that INAC-INV accumulated in wall appositions and intercellular spaces. INAC-INV was also localized at sieve cell walls in phloem tissues close to the site of wounding. Taken together, this study suggested that INAC-INV induction upon wounding injuries can play a role on responses to the high energy demand for wound healing process.

• KSBB Journal
• /
• v.22 no.5
• /
• pp.297-304
• /
• 2007

For large and rapid screening of high-yielding mutants of lovastatin produced by filamentous fungal cells of Aspergillus terreus, one of the most important stage is to test as large amounts of mutated strains as possible. For this purpose, we intended to develop a miniaturized cultivation method using $7m{\ell}$ culture tube instead of traditional $250m{\ell}$ flask (working volume $50m{\ell}$). For obtaining large amounts of conidiospores to be used as inoculums for miniaturized cultures, 4 components i.e., glucose, sucrose, yeast extract and $KH_2PO_4$ were intensively investigated, which had been observed to show positive effect on enhancement of spore production through Plackett-Burman design experimet. When optimum concentrations of these components that were determined through application of response surface method (RSM) based on central composite design (CCD) were used, maximum spore numbers amounting to $1.9\times10^{10}$ spores/plate were obtained, resulting in approximately 190 fold increase as compared to the commonly used PDA sporulation medium. Using the miniaturized cultures, intensive strain development programs were carried out for screening of lovastatin high-yielding as well as highly reproducible mutants. It was observed that, for maximum production of lovastatin, the producers should be activated through 'PaB' adaptation process during the early solid culture stage. In addition, they should be proliferated in condensed filamentous forms in miniaturized growth cultures, so that optimum amounts of highly active cells could be transferred to the production culture-tube as reproducible inoculums. Under these highly controlled fermentation conditions, compact-pelleted morphology of optimum size (less than 1 mm in diameter) was successfully induced in the miniaturized production cultures, which proved essential for maximal utilization of the producers' physiology leading to significantly enhanced production of lovastatin. As a result of continuous screening in the miniaturized cultures, lovastatin production levels of the 81% of the daughter cells derived from the high-yielding producers turned out to be in the range of 80%$\sim$120% of the lovastatin production level of the parallel flask cultures. These results demonstrate that the miniaturized cultivation method developed in this study is efficient high throughput system for large and rapid screening of highly stable and productive strains.