• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.3
• /
• pp.297-304
• /
• 2016

A numerical simulation has been performed for the penetration of a long-rod penetrator into a metal block (ceramic-tile-inserted 4340-steel plate). The impact velocity is 1.5km/s at a normal incidence angle. The first two validations are conducted for a semi-infinite block measuring the depth of penetration (DOP). The material model of ceramic is the JH-2 (Johnson-Holmquist) model. The predicted DOP values are in close agreement with the experimental data. Then, the primary simulation is performed by varying the position of the confined ceramic tile for three types of thickness of ceramic tile. The residual velocity, residual mass and residual kinetic energy of the long-rod are obtained from the simulation. Based on these predicted values, the trend of the ballistic performance of the protective structure is estimated. In addition, the mass efficiency is calculated in order to determine the performance of the ceramic-tile-inserted metal block. Finally, the optimum protective structure is identified.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.1
• /
• pp.1-7
• /
• 2011

In this study the optimal stacking section was selected by pendulum impact test for six different stacking sections of the composite safety barrier. The beam cross-section shape was determined through the poll on six different beam cross-section shapes. The six kinds of stacking design for the determined beam cross-section were suggested. CSM, DB, DBT and Roving fibers were used for stacking design. Horizontal beam and 3:1 sloped beam were modeled by using LS-DYNA. The fall impact simulation was carried out by using rectangular pendulum and cylinder pendulum. Optimal stacking section was determined by comparing and analyzing the impact simulation results.

• Composites Research
• /
• v.22 no.6
• /
• pp.52-62
• /
• 2009

This paper is for the state of the art of the lightweight protective clothing against the mine, and it covers the preliminary work focused on the appropriate protection, ballistics, convenience, and wearability. It is suggested that the lightweight protective clothing should be fabricated with the laminated materials of high strength woven and non-woven fabrics to reduce the weight and thickness, thus improving the wearability. And partial reinforcement of the protective clothing is necessary to prevent the mortal wound near the important parts of the body without disturbing the arbitrary activity. The composition of the protective clothing should be designed in consideration of easy putting-on and taking-off in addition to easy divesture, which require little motion of the body is in case of serious injury. Additionally, status of the practical technique for high performance and ultra-light hybrid armor material were also described.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3A
• /
• pp.323-330
• /
• 2008

The ship collision analysis of steel pile group as protection system of bridge in navigable waterways was performed to analyze the structural characteristics of protective structure during ship collision. The analysis encompassed finite element modeling of ship and pile, modeling of material non-linearity, hard impact analysis, displacement-based analysis and soft impact analysis for collision scenarios. Through the analysis of hard impact with a rigid wall, impact load for each collision type of ship bow was estimated. In the displacement-based analysis the estimate of energy which protection system can absorb within its maximum horizontal clearance so as to secure bridge pier from vessel contact during collision was performed. Soft impact analysis for various collision scenarios was conducted and the collision behaviors of vessel and pile-supported protection system were reviewed for the design of protection system. The understanding of the energy dissipation mechanism of pile supported structure and colliding vessel would give us the optimized design of protective structure.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2331-2338
• /
• 2014

The HEMP threat may have acquired new, and urgent, relevance as the proliferation of nuclear weapons and missile technology accelerates of the North Korea, for example, is assessed as already having developed few atomic weapons, and is on the verge of North Korea already has missiles capable of delivering a nuclear warhead against South Korea. ITU K.78, K81 and IEC recommended its counter-measuring for the industrial facilities with navigation and sailing facilities in order to obviate the all of processor equipped system malfunctions from the EMP/HEMP but its simulation must only be done by the computer simulation which had studied on the 1960-1990 years USA/AFWL papers. This result has a significant activities to the South Korea being under the North Korea threat because all of HEMP related products was strongly limited for export. The HEMP cord which was developed newly by the KTI including the HEMP generation & propagation analysis, optimal shelter design tool, essential EM energy attenuation in multi-layered various soils and rocks and HEMP filter design tool. Especially, the least square fitting method was adopted to analysis for the EM energy attenuation in the soils and rocks because it has a various characteristics based on the many times field test reports.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.351-351
• /
• 2015

음극방식법은 피방식체에 외부전원을 인가하거나 보다 활성 금속을 전기적으로 연결하여 피방식체를 일정 전위까지 음극분극 되도록 하여 부식을 억제하는 방법이다. 해수 중 음극방식을 실시할 경우 생성되는 석회질 피막(Calcareous deposit)은 소요전류밀도 감소로 인한 희생양극의 수명연장 및 물리적 방호벽 역할을 한다. 그러나 일반적인 석회질 피막은 세라믹과 같은 화합물로써 밀착력이 매우 약하며, 적지 않은 피막 형성 시간이 소요된다. 따라서 본 연구에서는 해수 중 음극전류 프로세스를 응용하여 실제 강관의 해중부 및 간만대 영역까지 석회질 피막을 균일-치밀하게 형성시키기 위한 최적의 조건을 찾고자 하였다. 각 조건별로 제작된 석회질 피막은 SEM, EDS 및 XRD를 통해 막의 모폴로지, 조성원소 및 결정 구조를 분석하였으며, 이를 바탕으로 희생양극 종류(Al, Zn) 및 1, 3, $5mA/m^2$의 전류밀도 조건에서 부위-기간별 형성된 석회질 피막의 메커니즘을 해명하였다. 또한 밀착성과 내식특성을 평가하기 위해 테이핑 테스트, 침지-자연전위 거동을 분석 및 평가하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.1031-1033
• /
• 2013

Radiation protection, as well as finding the location of the radiation source, such as the Fukushima radiation leak accident, it is important for the early and safe disposal of nuclear accident. The three-dimensional position of the radiation source detection distance of the radiation source can provide additional information to the existing radiation detectors radiation of a two-dimensional position detection function and then it can play a decisive role in the radiation contaminant removal and decontamination work. In this research, three-dimensional semiconductor sensor based on dual radiation detectors radiation source device visible part of the research and development of efficient radiation sensor unit on the design of the shielding structure.The lightweight, high-efficiency radiation source locator implementation was attempted for the structure and thickness of the shielding and collimator to perform the simulation of the radiation shielding for the various parameters of the shape model through design the optimal structure of the MCNP-based heavy-duty tungsten shielding, lead shielding The results of this study, is a compact, lightweight three-dimensional radiation source detection and future of silicon - based sensors will be used in the study.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.251-251
• /
• 2018

도로설계기준(2012)에 따르면 노면 배수시설은 측구, 집수정, 배수관, 배수구(빗물받이, 맨홀) 등으로 구성되며 중앙분리대 배수에서 구조가 방호벽일 경우 원칙적으로 집수정과 종배수관, 횡배수관을 설치하여 노면수를 배수한다. 최근 기후변화에 따른 국지성 집중호우로 교량 배수시설의 배수능력 부족으로 교량의 노후화, 노면의 체수와 수막현상을 야기한다. 교량 설계 시, 교량의 외관은 점배수에 의한 배수불량으로 막힘부에서의 식물생육, 부식, 배수구의 오염 등으로 심미성에 악영향을 미치고 있다. 따라서 국토교통부 도로 배수시설 설계 및 관리지침에서는 기존의 집수정으로 유도하여 배수하는 점배수 형태에서 우수의 지체시간을 저감하기 위해 배수구로 즉시 배수되어 배수 효율을 증가시켜주는 선배수시설을 권장하고 있다. 그러나 선배수 구조의 일반적인 내용만을 기술하고 있으므로 보다 상세한 설계기준이 필요하다. 또한 국내에서는 교면 배수를 위한 횡배수구의 배수능력에 관한 설계 개념은 미국의 빗물받이 설계 개념을 그대로 적용하고 있어서 교량 배수시설의 배수능력 증대를 위한 수치 및 수리실험에 관한 기술적인 자료가 부족한 실정이다. 따라서 도로의 흐름해석 및 선배수를 위한 측구 횡배수관의 흐름개선에 관한 구체적인 연구가 필요한 실정이다. 본 연구에서는 배수로 전반의 유향 분석 및 횡유입관 유입부에서의 상세한 흐름해석과 통수능력을 분석하기 위해서는 수리실험을 통한 연구가 필요한 실정이다. 그러나 최적 횡배수관의 형상 및 간격 설정에 대한 수리실험의 물리적 및 시간적 한계를 극복하기 위해 Fluent 모형(Ansys Workbench 13.0)을 활용한 수치모의를 수행하여 모형의 적용성을 검토하였다. 다상유동 해석을 위해 VOF(Volume of Fluid)방법을 적용하였고, 수치해석 방법으로는 비정상류, 난류 모형으로는 standard ${\kappa}-{\varepsilon}$모형을 적용했다. 도로 형상에 따른 우수유출량을 비교 분석하기 위하여 횡경사는 2%로 고정하고 종경사를 2%로 선정하여 수치모의를 통한 배수능력을 분석하고 설계에 직접적인 적용성을 검토하였다. 횡배수관의 간격변화 및 배수공의 위치 변화 등에 따른 차집량을 분석하였으며, 개략적인 수리실험 결과와 수치모의의 차집율을 비교 및 분석하여 Fluent 모형의 적용성을 확인하였다. 또한, 횡배수관의 유입부에서의 유속 변화 및 유출부에서의 유속이 모의가 가능하므로 배수시설에서 보다 정확한 흐름 해석이 가능하여 보다 적정한 배수능력 분석이 가능할 것으로 판단된다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1777-1783
• /
• 2014

In this paper, we designed and fabricated a high-speed semiconductor sensor for use in power control devices and analyzed the characteristics with pulsed radiation tests. At first, radiation sensitive circular Si PIN diodes with various diameters(0.1 mm ~5.0 mm) were designed and fabricated using Si epitaxial wafer, which has a $42{\mu}m$ thick intrinsic layer. The reverse leakage current of the diode with a radius of 2 mm at a reverse bias of 30 V was about 20.4 nA. To investigate the characteristic responses of the developed diodes, the pulsed gamma-radiation tests were performed with the intensity of 4.88E8 rad(Si)/sec. From the test results showing that the output currents and the rising speeds have a linear relationship with the area of the sensors, we decided that the optimal condition took place at a 2 mm diameter. Next, for the selected 2 mm diodes, dose rate tests with a range of 2.47E8 rad(Si)/sec to 6.21E8 rad(Si)/sec were performed. From the results, which showed linear characteristics with the radiation intensity, a large amount of photocurrent over 60mA, and a high speed response under 350ns without saturation, we can conclude that the our developed PIN diode can be a good candidate for the sensor of power control devices.