• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.61-64
• /
• 2000

본 논문에서는 cdma2000 규격을 채용한 역방향 링크 동기식 DS-CDMA 시스템을 시뮬레이션 하여 시스템의 성능을 분석하려다 cdma2000 시스템은 기존의 IS-95와는 달리 Pilot 채널을 이용하여 페이딩 채널을 추정하고 이를 이용하여 채널 환경에 의한 수신신호의 위상변화를 보상해 준다. 채널 추정필이 31pcg 심볼에서 Pilot 채널과 Traffic 채널의 최적의 전력비를 구하였다. 또한 시스템에 Power Control을 적용하여 Target FER을 만족시키기 위한 required Eb/No를 구하였고, 서로 다른 데이터율의 사용자가 동시에 전송할 때의 성능을 분석하였다.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.187-189
• /
• 2020

본 논문은 AGV(Automated Guided Vehicle)용 규격에 적합한 자기 유도 방식의 무선 전력 전송 패드 설계 디자인을 제안한다. 제한된 공간에서의 최적설계를 위해 코일의 직경, 턴수, 페라이트의 배치에 따른 관련 파라미터의 상관관계를 분석하며 유한요소해석 시뮬레이션을 통해 대해 비교 및 선정한다. 제안한 설계 결과는 3kW급 하드웨어를 제작하여 검증하며, 발열 및 효율을 확인한다.

• Journal of the Korean Institute of Gas
• /
• v.22 no.3
• /
• pp.65-73
• /
• 2018

Coalbed methane has a nonlinear desorption curve depending on the pressure, so an appropriate production system should be constructed considering this phenomenon. The capacity and specification of the coalbed methane gas production facility are determined by the gas flow rate and pressure in the coalbed, which is the external boundary condition of the system. Thus, it is essential to analyze these characteristics in gas production. The gas inflow equation was calculated using the reservoir flow model and utilized as the boundary condition of the whole production facility in this study. Also, to understand the effect of pressure drop on the gas flow in the production facility, the nodal analysis was performed using the flow analysis simulator of production equipment, and we determined the proper specifications and operating conditions of the production facility. This study presents a design criteria as to production and gathering system capable of effectively transporting coalbed methane.

• Journal of Bio-Environment Control
• /
• v.16 no.4
• /
• pp.275-283
• /
• 2007

This study was carried out to: (1) analyze structural stability of representative rain-sheltering greenhouses for large-grain grapevine cultivation with widths of 3.6 m and 5 m in case of using the existing pipe for agriculture; (2) present the optimum specification of pipes in the greenhouse with a width of 5 m under the condition of using the pipe of which ultimate strength has been above $400N{\cdot}mm^{-2}$; (3) evaluate stability and also present the optimum specification of pipes as eaves height was augmented. The above analyses were done for greenhouses with roof vents and also with a main-column interval of 3 m and a rafter interval of 60 cm. First, the existing 3.6 m greenhouse with a rafter of ${\Phi}25.4{\times}1.5t@600$ was stable far a snow-depth of 35 cm but unstable for a wind velocity of $35m{\cdot}s^{-1}$. Meanwhile the existing 5 m greenhouse with the same rafter was not stable for a wind velocity of $335m{\cdot}s^{-1}$ as well as a snow-depth of 35 cm. This meant that existing greenhouses had to be reinforced to secure stability. Second, the specification of pipes, especially rafter, could be classified as two cases. One had a structural stability at a safe wind velocity of $35m{\cdot}s^{-1}$ and a safe snow-depth of 40 cm for which stability the rafter had to be ${\Phi}31.8{\times}1.5t@600$, and the other had a stability at $30m{\cdot}s^{-1}-35cm$ at the specification of rafter ${\Phi}25.4{\times}1.5t@600$. Finally, eaves height had a significant effect on safe wind velocity. But it had little influence on safe snow-depth. The results showed that the specification of side-wall pipes had to be reinforced for the safe side velocity accord-ing to the increment of eaves height and similarly the specification of fore-end post far the safe fore-end velocity.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.2
• /
• pp.55-61
• /
• 2001

In this paper, a synchronous reverse link DS-CDMA system with cdma2000 standard is simulated to analyze performance of system and to find the optimum power ratio between pilot channel and traffic channel. In the cdma2000 the pilot channel is used to estimate fading channel, in contract to IS-95 and it compensates phase variation of received signal due to channel environment. When the length of channel estimation is 31pcg symbols, we can find the optimum power ratio of pilot channel to traffic channel. And also we find Eb/No satisfying target FER when the power control is applied and analyze performance of system with multiuser transmission.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.2
• /
• pp.165-175
• /
• 2001

In this paper, it is analyzed lumped element isolators analytically by the analysis program using scattering matrixes including ferrite saturation magnetization, external direct current magnetic field and strip line length and width, designed and experimented the small isolator of mobile phone. The simulation results show that the characteristics of the isolator are affected by external R, C, length and width of strip line and ferrite width and saturation magnetization sensitivity. We proposed the isolator specification applied cellular and PCS mobile phones, experimented the isolator for cellular mobile phones. From the experimented result, isolation and return loss are measured below 20 dB, insertion loss is below 0.7 dB, bandwidth is about 44 MHz at center frequency 836.5 KHz. The implemented isolator has better performances than the conventional one.

• International Journal of Highway Engineering
• /
• v.7 no.4 s.26
• /
• pp.31-39
• /
• 2005

Tests are conducted to analyze the compaction characteristics of domestic river sand used frequently for backfill in construction of electrical pipeline. As a result of test, the range of specific gravity of sand is found to be in between 2.63 and 2.67, and of maximum dry weight of sand is in between $1.70g/cm^3\;and\;1.86g/cm^3$. Also, the optimum moisture content is found to be in between 11.3% and 13.8%. The variability of compaction degree with respect to compaction energy is well captured by hyperbolic function.

• International Journal of Highway Engineering
• /
• v.2 no.4 s.6
• /
• pp.123-131
• /
• 2000

The compaction equipment and the Marshall stability head are the two important testing equipment for the Marshall test. The compaction equipment is closely related to the air void, VMA and compactability of the mixtures, and the stability head is related to the Marshall stability and the flow, therefore the size and the shape of the equipment is essential for finding the accurate optimum asphalt content for the asphalt mix design. However, the size and the shape of the equipment currently used and the condition of the installation of compaction pedestal in this country are different from each agency and manufacturer. The national inspection of the Marshall equipment is necessary because the difference can affect the test results and also the performance of the asphalt pavement.

• Journal of Internet Computing and Services
• /
• v.12 no.6
• /
• pp.129-137
• /
• 2011

In this paper, a fast and reliable emergency broadcasting system for Advanced Television System Committee (ATSC) Mobile DTV is proposed. The proposed protocol is based on the Emergency Alert Message (EAM) standard currently used for cable TV emergency broadcasting in the United States. The protocol is implemented and evaluated to enable fast emergency information propagation. ATSC Mobile DTV enables digital mobile broadcasting without affecting the existing ATSC legacy digital TV system. Since ATSC Mobile DTV devices are mobile and self-powered, they can effectively propagate emergency information. The proposed emergency broadcasting protocol can be applied in all countries adopting the ATSC standard.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.191-196
• /
• 2015

해상 pedestal 크레인은 각종 운송물을 선박에 싣거나 내리는 해상 운송에 필수적인 장비이다. 따라서 구조적 안전성을 가지는 크레인 설계가 요구된다. 그의 일환으로 수행된 '해상 pedestal 크레인의 설계 개선을 위한 연구'에서는 기존 크레인의 기초 설계에 대해서 구조적 안전성올 평가하여 개선 방안을 제시하였다. 또한 좌굴 안정성 향상을 위한 보강재 설계를 수행하였다. 하지만 상세설계 관점에서 미비한 점이 있어 이를 보완할 필요성이 있다. 안전성 평가를 위해 필요한 응력을 계산하기 위해 EDISON-CSD프로그램을 통해 유한요소모델 해석을 활용한 구조해석을 수행하였다. 효율적인 해석을 위해 상세설계에 필요한 부분영역을 선택하여 모델링 하였으며 전체영역에서의 해석 결과 값을 등가 힘, 등가 모멘트로 환산하여 경계조건으로 부여하였다. 보강재간의 교차점 형상이 안전성에 미치는 영향을 보기위해 stiffener와 diaphragm의 교차점 형상(반원, 정사각형, 사다리꼴)에 따라 안전성 평가를 수행하였고, 안전 여유의 유효한 차이를 보이지 않음을 확인하였다. 평가에 필요한 응력계산을 위해 또한 Diaphragm의 좌굴에 대한 영향을 고려하기 위해 설계 규격 DNV-RP-201 8장(Buckling of girders)을 분석하였고, 안전성 평가에 반영하였다. 또한 실제 현장에서 보편적으로 사용되는 angle 형상 stiffener의 치수 도출을 위해 최적설계를 수행하였고, 모든 설계 제한조건을 만족하면서 최소의 무게를 가지는 합리적인 치수를 도출하였다.