• Journal of the Korean GEO-environmental Society
• /
• v.7 no.3
• /
• pp.21-29
• /
• 2006

The treatment performance of ozonation and three types of advanced oxidation processes (AOPs) such as $O_3/H_2O_2$, $O_3/UV$, $O_3/H_2O_2/UV$ was experimentally investigated for the treatment of refractory synthetic dye wastewater. The removal efficiency of $COD_{cr}$, color and biodegradability ($BOD_5/COD_{cr}$) were relatively evaluated in each treatment unit with simulated dye wastewater. Optimal operational conditions of pH, temperature, dosage and circulation flow rate were also investigated. All suggested processes revealed an effectiveness for the removal of color within a short operational time, moreover, $O_3/H_2O_2/UV$ process showed the highest $COD_{cr}$ removal and biodegradability enhancement among proposed oxidation process.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.503-503
• /
• 2010

국제협약에 따라 2012년부터 유기성폐기물의 해양배출이 금지됨에 따라 환경문제를 유발하는 축산분뇨, 음식물쓰레기, 농축산 폐기물 등의 처리가 곤란한 실정이다. 그러나 최근 저탄소 녹색성장으로 정부가 폐자원 에너지화에 관심을 기울이면서 위의 폐기물을 바이오가스로 전환하는 바이오가스 플랜트(Biogas Plant, BGP)의 이용이 보다 활성화 될 전망이다[1]. 이 바이오가스 처리방법에서 유기물은 메탄가스로 배출되고[2], 나머지 영양성분들(질소, 인산, 칼륨 등)은 모두 소화액에 남아있으므로[3] 이들은 친환경농업에서 필요한 액비로도 활용이 가능하며, 혐기소화 처리방법은 일반적인 가축분뇨 처리과정에서 발생되는 악취문제도 해결할 수 있는 장점 또한 가지고 있다. BGP는 유기성 폐기물에서 혐기성소화를 통해 바이오가스를 만드는 장점이 있는 반면, 가스를 만들고 남은 소화액은 액비로 활용이 가능하지만, 액비로 활용이 불가능할 경우 악성 폐수로 그 처리가 매우 까다로운 단점이 있다. 일반적인 생물학적인 폐수처리방법으로는 처리가 곤란하며, 환경기준을 맞추도록 처리하는데 많은 비용이 소요된다. 이러한 폐액처리를 위해 공정의 단순화와 높은 처리 효율[4]을 가지면서, 액비 또는 정화처리공정이 가능한 방법으로서 분리막공정이 바람직하나, BGP 발생폐액의 성상이 고농도의 오염물질을 함유하고 있어 적용이 쉽지 않다. 따라서 본 연구에서는 이를 보안할 수 있는 와류발생형 막모듈을 이용하여 Biogas Plant의 발생폐수에 대하여 분리막을 이용한 효과적인 처리공정을 개발하고 그에 따른 최적의 조건을 찾는 연구를 하고자 한다. 와류발생형 막모듈을 막과 막 사이에 와류를 발생시킴으로써 막에 전단력을 가하여 막의 가장 큰 단점인 막오염을 줄이는 방법으로 기존의 막모듈과 큰 차이가 있을 것으로 예상된다. 본 연구에서는 기존의 분리막 모듈[5]과 와류발생형 막모듈의 차이를 실험을 통해 확인하며, 막에 가해지는 압력, 막을 통과하는 유량 등의 차이를 두어 최적조건을 탐색하였다.

• Journal of Broadcast Engineering
• /
• v.12 no.2
• /
• pp.102-111
• /
• 2007

Currently, the efficient adaptive video streaming services and coding techniques are required to ensure quality of service (QoS) in diverse multimedia environments. To maintain optimal video quality in these environments, it is required to support scalable video coding (SVC) technique and proper QoS metric methods. In this paper, we propose a new quality metric that takes in to the temporal, the SNR, the spatial scalability on SVC. Experimental results shows that proposed method has a higher correlation with the subjective quality. We expect that the proposed metric plays an important role in deciding the coding parameter to optimize the quality of the SVC based video.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.4
• /
• pp.254-262
• /
• 2015

Parametric study on submerged body shape of an oscillating hemisphere point absorber was conducted to predict the optimal relation between radius and draft of the body. As an additional damping due to power takeoff system, the optimal damping same as wave radiation damping was applied to the PTO system to produce the maximum wave power. Body response spectrum and power spectrum were obtained for various peak frequencies on wave spectra. It was found that the maximum power can be generated when the peak frequency of available wave power was 20% greater than that of wave spectrum.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.6
• /
• pp.357-362
• /
• 2015

A novel $TiO_2$-Coconut Shell Powder Composite (TCSPS), prepared by the controlled sol-gel method with subsequent heat treatment, was evaluated as an innovative photocatalytic absorbent for the removal of methylene blue. Optimal preparation conditions of TCSPC were obtained by a response surface methodology and a central composite design model. As compared with the results obtained from one-factor-at-a-time experiments, the values were approximated to the nearest condition of these values and the following experimental parameters were set as the optimum : $600^{\circ}C$ calcination temperature and 20 g of coconut shell powder loading amount.

• Journal of Korea Soil Environment Society
• /
• v.2 no.2
• /
• pp.53-60
• /
• 1997

A series of batch and lab-scale pilot tests were conducted to optimize the design parameters for the application of soil washing techniques to the soil contaminated by heavy metals. Cu, Pb, and Zn were selected as target heavy metals. The concentrations of Cu, Pb, and Zn were 500mg/kg dry soil, 1, 000mg/kg dry soil, and 500mg/kg dry soil, respectively. Citric acid and oxalic acid were used for the extractants. In the batch tests, the extraction efficiencies for Cu, Pb, and Zn were 79%, 72%, 72%, respectively. The proper extractant concentration and dilution ratio(weight/volume) for Cu and Pb were turned to be citric acid 50mM and 1:5, respectively. The extraction efficiencies were enhanced with the addition of 1~2% OA-5 or SDS. From pilot scale tests for Pb, first stage and second stage of soil washing resulted in the extraction efficiency of 59% and 78%, respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.3
• /
• pp.289-296
• /
• 2007

Porous media for sewage treatment were developed through a pyrolysis process of food wastes with loess in the study. This work was carried out in two consecutive stages; in the first stage, new porous media were prepared through a high temperature pyrolysis process, and then the resultant media were applied to a simple lab-scale sewage treatment process in the second stage. To determine the optimum operating conditions of pyrolysis and mixing ratio of materials, physical properties such as specific surface area, porosity and compressive strength of final products were analyzed. The removal efficiencies of TOC and COD were measured to evaluate the effectiveness of resultant porous media. As a result of the experiment, we found that the best mixing ratio of food wastes to loess was 1 : 1 at $1,100^{\circ}C$. Average porosity of the developed media was 37.0%, in which pore size ranged from 1 to $20{\mu}m$, showing quite vigorous microbial activation. After immersing the media into a reactor for sewage treatment for eight days, removal efficiencies of TOC and COD were 87.3% and 85.0%, respectively.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.1
• /
• pp.47-54
• /
• 2008

In this study, the effect of water content condition was investigated on the Mohr-Coulomb shear strength parameters which are commonly used as the input data in the soil slope analysis. For the purpose, a series of direct shear test was conducted in different water content conditions on the two types of weathered soils and a dam core material, obtained from the domestic slope construction sites and the dam construction site, respectively. The comparisons between the values of the Mohr-Coulomb ${\phi}_{peak}$ and $c_{peak}$, estimated from the relationships between the normal stress and the peak shear stress for the samples in the four different water content conditions (i.e., dry side, optimum, wet side, and saturated), showed that overall, the values of $c_{peak}$ decreased gradually while those of ${\phi}_{peak}$ did not vary much with increasing the water content. A rough estimate for the varying ratio of the values of ${\phi}_{peak}$ and $c_{peak}$ indicated that the values of $c_{peak}$ decreased by every 25% of the $c_{peak}$ values in dry side, while those of ${\phi}_{peak}$ were constant, as the water content condition changed from dry, optimum, and wet to saturated, respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.12
• /
• pp.705-711
• /
• 2015

Degradation of 2,6-Dichlorophenol (DCP) using liquid ferrate(VI) synthesized by wet oxidation method has been studied. Several parameters such as pH (acid, base and neutral), DCP initial concentration, ferrate dosage, and temperature have been examined to determine the optimal experimental conditions. The ferrate(VI) has useful properties such as strong oxidizing power and selectivity and generates a non-toxic end product, Fe(III). Ferrate ion reduced rapidly to Fe(III) and oxygen in acidic and neutral conditions. The experimental results showed the higher DCP degradation efficiency in the neutral condition than in the acidic and basic conditions. The oxidation of DCP strongly depended on the dosage of ferrate added to the reactor and DCP initial concentration. With increasing of ferrate dosage the degradation efficiency of DCP increased, while the degradation efficiency of DCP decreased with increasing of DCP initial concentration. The effect of temperature has been tested at 4 different levels (10, 25, 35, and $50^{\circ}C$). The optimal temperature was obtained in $25^{\circ}C$ and degradation efficiency decreased as the temperature increased in the range from $25^{\circ}C$ to $50^{\circ}C$. The DCP degradation pathways were studied and proposed based on the intermediate products identified by GC/MS analysis.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.5
• /
• pp.437-442
• /
• 2010

This work was initiated both to maximize purity of calcium fluoride sludge and to minimize water content in the settled sludge. The sludge was produced in the process of fluoride removal of semiconductor wastewater by the addition of $Ca^{2+}$ ion. Fludized bed reactor(FBR) using calcium fluoride as a seed was adapted. Optimum pH and molar ratio of $Ca^{2+}/F^-$ were determined in lab-scale study. The experimental results showed that fluoride removal was increased as pH and molar ratio of $Ca^{2+}/F^-$ increased, with the best removal of 79.8% in an optimum condition. In the optimum point of fluoride removal, very low ${PO_4}^{3-}$-P removal of 9.3% was observed. It indicates forming $CaF_2$ crystal of high purity, when side reaction of calcium with phosphate was minimized. In addition, water content of settled sludge was 19.3%, which is relatively low compared to other fluoride removal processes. Consequently, the FBR process proposed in this study was very effective in fluoride removal, producing good sludge of high purity and less water content.