• Explosives and Blasting
• /
• v.27 no.1
• /
• pp.38-46
• /
• 2009

Recently, as a reduction method of vibration and noise, an electronic detonation which has an accuracy of time and a freedom of input delay time was introduced. A waveform composition program can determine a delay time and accomplish simulation under environment similar to real blast using a delay time. In this study, optimum delay time which controls vibration is obtained and real measurement vibration level is estimated by a waveform composition program.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.5C
• /
• pp.422-434
• /
• 2002

We propose 3-layered hierarchical fiber-optic backbone transmission network composed of B-DCS, Backbone ring, Edge ring for efficient transmission of high capacity traffic and consider design method to ensure network survivability of each layer at affordable cost. Mathematical ring-construction cost minimization using MIP(Mixed Integer Programming) models results in NP-complete problem. So, it is hard to solve it within reasonable computing time. on a large-scale network. Therefore we develop heuristic algorithms solving WSCAP(Working and Spared Channel Assignment Problem) for B-DCS, MRLB(Multi-Ring Load Balancing) problem for Backbone ring, and ORLB(Overlayed Ring Load Balancing) problem for Edge ring and show their usefulness through case study.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.3
• /
• pp.29-36
• /
• 2015

Steganography is the technique of hiding the existence of a secret message that is communicated hiddenly. Generally, the main objectives of this paper is to develop newer and more sophisticated steganographic techniques based on perceptual transparency, robustness and capacity of the hidden data. This paper analyzes the advantages and disadvantages of image steganography techniques and proposes an effective method. As a result, the images steganography technique based on good ELSB and DCT which applies the rearranged key is secure and effective.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.8 no.2
• /
• pp.129-139
• /
• 2006

When blasting by imposing the time difference between two adjacent charge holes, the mutual interference phenomenon occurs depending the feature of blast. This interference phenomenon of blast amplifies or compensates the blast-induced vibration depending on the overlapping mechanism. Thus, this experiment aims at finding out the optimum delay time by measuring the blast vibration data from the single hole blast during the blasting test and composing each blasting waveform, and at proving the its efficiency by applying the composition delay time in the entire cross section. The experiment showed that the blasting-induced vibration was reduced by endowing an optimum delay time of electronic detonator appropriate to the rock quality of construction site compared to the typical delay time (20, 25ms) of existing detonator (non-electric and electric detonator). From these results, the excavation efficiency using blasting could be enhanced..

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.357-357
• /
• 2018

기후변화의 영향으로 기온과 강수량의 증가가 나타나고 있으며, 이러한 변화는 수문 순환 및 강우-유출의 변화로 인해 하천의 수질에도 영향을 미치게 된다. 수질 오염원 중 배출원의 형태가 명확하지 않은 비점오염원은 강우의 유출과 함께 발생하는 특징을 띤다. 비점오염원은 지표면에 존재하던 오염 물질이 지표면에서 유출이 발생함에 따라 하천으로 유입되는 오염물이다. 이에 따라 강우량에 비례하는 특성을 띠며 점 오염원과 달리 변동 폭이 크다. 대표적인 비점오염물로 알려진 질소, 인과 같은 영양물질은 하천으로 유입 시 부영양화를 야기하는 물질로 우리나라와 같이 계절별 강수량의 차이가 큰 환경에서 비점오염물의 지속적인 관리는 필수적이라 할 수 있다. 비점오염원은 오염원을 특정할 수 없기 때문에 하천으로의 유입을 최소화하는 최적관리기법(Best Management Practices)을 통해 관리한다. 국내외에서 가장 널리 이용되는 비점오염원 최적관리기법은 식생형 시설로, 나지에 식물체를 파종함으로써 토양의 유실을 방지하여 비점오염물의 하천 유입을 저감시키고, 자연경관으로써 기능한다. 미래 수자원의 효과적인 이용을 위해서는 기후변화에 따른 수문 변화, 그로 인한 수질 변화 특성을 파악하는 것은 매우 중요하다. 이에 본 연구에서는 기후변화 시나리오를 통해 기온, 강수, 습도와 같은 기후 조건의 변화를 고려하여 예측되는 비점오염물의 유출 저감 대책의 영향을 분석하고자 한다. 이 때, 기후변화 시나리오는 그 자체로 불확실성을 포함하는 자료이기 때문에 특정 시나리오를 분석하기 보다는 기후변화 진행 정도에 따른 비점오염물 유출을 산정하고 저감 대책의 영향을 분석한다. 연구를 수행하기 위해 장기간의 강우-유출 특성의 모의가 가능하고 저감 대책을 제공하는 SWAT 모형을 이용한다. SWAT 모형에서는 여러 최적관리기법을 제공하는데, 가장 널리 이용되는 것이 식생형 시설인 것에 기초하여 적용할 저감 대책으로 계단식 산비탈(Terracing)을 선정하였다. 저감 대책의 적용으로 비점오염물질이 적게는 약 30%에서 많게는 60%까지 변화하며 매우 효율적으로 저감되는 것이 확인되었다. 저감 시설의 적용을 통해 총 량 뿐만 아니라 시간에 따른 비점오염물 유출의 변동성 또한 감소시킬 수 있음이 확인되었다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.8 no.1
• /
• pp.65-76
• /
• 2006

In this study, NATM can reduce the loosened ground near the tunnel face more than the other pre-existing tunnelling methods, because of rapid supporting by means of shotcrete and rock bolts. However, this method sometimes can not help for a unstable tunnel face with a unsupported caondition. In order to keep from that dangerous case, some excavation methods such as bench cut and drift advancing method are introduced, despite of high construction cost and period. So, this thesis is intended to introduce the new tunnel face shape, that is concave shaped face, and discusses its effects on the tunnel stabilization.

• Journal of Korea Water Resources Association
• /
• v.51 no.7
• /
• pp.585-597
• /
• 2018

This study aims to investigate the variation of water quality and discharge under the condition of climate change and Best Management Practices (BMPs), which is one of the reduction methods for non-point source pollution. Soil and Water Assessment Tool (SWAT) model is applied to case in Cheongmicheon watershed. The coefficients required for SWAT model were calibrated using SWAT Calibration and Uncertainty Program. Climate change is considered by using Representative Concentration Pathway (RCP) scenarios, RCP 4.5 and RCP 8.5. It is known from simulation results that the non-point source pollutant increases under the climate change scenario assuming worse condition. It is also found in this study that an appropriate application of BMPs is able to reduce the quantity and temporal variation of non-point source pollutant effectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.232.1-232.1
• /
• 2015

흑연 박리를 통해 형성된 탄소나노플레이트를 탄소나노튜브 합성을 위한 지지체로 적용하여 탄소나노플레이트 위에 직접 탄소나노튜브를 합성함으로써 3차원 구조의 탄소나노튜브/탄소나노플레이트 나노혼성체를 합성하였음. 흑연의 박리를 통해 탄소나노플레이트를 제조하기 위해서 층간화합물 삽입과 열처리를 통해 팽창흑연을 제조하고, 물리적 분쇄 과정과 액상 고압균질기 방법을 통해 두께 30nm 이하, 수 마이크론 크기의 탄소나노플레이트를 제조하고 동결건조 방법으로 탄소나노플레이트를 제조하였음. 제조된 탄소나노플레이트 상에 탄소나노튜브 합성을 위해서 탄소나노플레이트 표면처리 공정을 적용하였는데, 표면처리 방법 및 물질에 따라 금속 촉매의 담지량 및 담지 형상이 결정되어 합성되어지는 탄소나노튜브의 합성 수율과 합성된 탄소나노튜브의 형성이 다르게 나타났다. 표면처리 방법으로는 산처리방법, 흡착성 고분자 처리법, 무전해 도금법, 무기산화물 처리법이 적용되었다. 또한 담지되는 촉매 종류 및 함량, 조촉매 적용에 따라 탄소나노튜브 합성 거동을 분석하여 최적 촉매시스템을 구축하여 촉매담지체 질량 대비 700% 이상의 고수율의 탄소나노튜브/탄소나노플레이트 혼성체 합성법을 개발하였다.

• Journal of Korean Society of Transportation
• /
• v.24 no.1 s.87
• /
• pp.109-120
• /
• 2006

Since the 1st of July, 2004, the public transport system of the Seoul metropolitan area has been rearranged. In the new system, bus lines are divided into 4 classes-wide area, arterial road, branch, and rotation lines with renewed fare system based on the total distance travelled. Since central control center known as the Bus Management System (BMS) integrates the entire system operation. it now becomes feasible to collect travel information and provide it to the users scientifically and systematically. The Purpose of this study is to forecast transit travel time using real-time traffic data coming from both buses and subway. This is significant contribution since provision of real-time transit information and easy access to it would most likely boost the use of mass transit system, alleviating roadway congestion in the metropolitan area.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.2
• /
• pp.369-383
• /
• 2018

User authentication using PIN input or lock pattern is widely used as a user authentication method of smartphones. However, it is vulnerable to shoulder surfing attacks and because of low complexity of PIN and lock pattern, it has low security. To complement these problems, keystroke dynamics have been used as an authentication method for complex authentication and researches on this have been in progress. However, many studies have used imposter data in classifier training and validation. When keystroke dynamics authentications are actually applied in reality, it is realistic to use only legitimate user data for training, and using other people's data as imposter training data may result in problems such as leakage of authentication data and invasion of privacy. In response, in this paper, we experiment and obtain the optimal ratio of the thresholds for distance based classification. By suggesting the optimal ratio, we try to contribute to the real applications of keystroke authentications.