• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.3
• /
• pp.180-188
• /
• 2022

This study was conducted to determine the optimal sowing date for seed yield of summer oat (Avena sativa L.) cultivars "Darkhorse (DH)" and "Highspeed (HS)" in Wanju, Jeonbuk province between 2017 and 2018. We investigated seed yield from 4 sowing dates: July 15, July 30, August 15, and August 30. We evaluated the agronomic characteristics of summer oats (DH and HS). We found the heading date of all cultivars to be within 50 days. Delayed sowing resulted in significantly increased plant height for both years and cultivars. There was no significant difference in spike length of DH and HS which ranged from 12.8 to 17.8 cm. The sowing date of July 30 produced a higher number of grains per spike, but this yield differed significantly by year and cultivars. In 2017, the first sowing resulted in the lowest DH yield at 132 kg per 10a, while the second sowing had the highest yield at 227 kg. HS yield was the lowest in the first sowing at 126 kg and the highest in the third sowing at 219 kg. In 2018, DH had the lowest yield from the first sowing at 184 kg per 10a, and the highest from the second sowing at 240 kg, but there was no significant difference between these yields. The first sowing for HS gave the lowest yield at 160 kg, and the second sowing produced the highest at 258 kg. The germination rate of harvested seeds from each sowing date in 2017 and 2018 was found to be higher than 85% and there was no significant difference between the two cultivars in the 2018 germination rate test. Thus, we found the optimal sowing date for summer cultivation of oats for the highest seed yield to be between July 30 (second sowing) and August 15 (third sowing).

• Korean Journal of Plant Taxonomy
• /
• v.44 no.3
• /
• pp.208-221
• /
• 2014

The Holocene Hypsithermal Interval(or climatic optimum) was the warmest post-glacial period: temperatures rose to as much as $1-4^{\circ}C$ above present temperatures. We hypothesize that southern plants expanded northward and upward during the Hypsithermal Interval. The Hypsithermal relict populations are defined as populations which distribute mainly in Is. Cheju and Southern subregions and have populations of short-distance dispersion separated by more than 100 km from the nearest distribution. The Hypsithermal relict species were identified and their distributions were mapped based on botanical floras and checklist, herbaria specimens, ecological studies, and field surveys of selected species. Evaluation of the hypothesis was based on reviews of published pollen stratigraphic and paleoecological studies. The results showed that the Holocene Hypsithermal relicts such as Corylopsis coreana Uyeki, Carpinus turczaninowii Hance, Stewartia koreana Nakai ex Rehder were expanded northward during the Holocene Hypsithermal Interval.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.393-393
• /
• 2023

최근 기후변화에 대한 관심이 높아짐에 따라 전 세계적으로 미래 기후변화 예측 전망에 대한 다양한 연구들이 수행되었으며, 특히 IPCC(Intergovernmental Panel on Climate Change)의 기후변화 6차 보고서에 채택된 SSP(Shared Socio-economic Pathway) 시나리오를 이용한 연구가 활발한 상황이다. 이들 연구에서는 미래 기후변화의 양상 비교를 위한 기간 구분은 통상적으로 F1(2011-2040), F2(2041-2070), F3(2071-2100)으로 구성된다. 하지만 이는 단순하게 동일한 기간으로 나누어 설정한 것으로, 통계적 근거가 부족할 뿐만 아니라 변화 추이를 확인하기 위한 수단으로 사용하기에 부족할 수 있다는 한계점이 존재한다. 이 연구에서는 기후변화 패턴에 대한 기존 연구의 한계, 특히 미래 기후변화를 비교하기 위해 사용되는 기간 분류와 관련하여 한계점을 보완하고자 한다. SSP 시나리오 모델 중 UKESM1 모델을 활용하여 ASOS(Automated Synoptic Observation System) 기상관측소 기준 59개 지점에서 추출한 강수량 데이터를 분석하였다. 이후, 기후변화 비교를 위한 최적의 분류를 결정하기 위해 장마철인 6월부터 9월까지의 강수 데이터에 대해 통계분석 및 Pettitt 검정을 수행해 최적 기간을 산정하였다. 이를 통해 기존의 F1, F2, F3 분류 방식과 통계분석을 통해 도출한 최적 시기의 유출 특성 분석결과의 변화양상을 비교하였으며, 각 방법에 대한 비교를 통해 기후변화 추이에 대한 이해를 제공할 수 있을 것으로 판단하였다. 결과적으로 이 연구는 기후변화 시나리오를 활용하는 연구 수행 시 기간 구분에 대한 발전된 접근 방식을 제시하고자 한다.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2003.10a
• /
• pp.81-84
• /
• 2003

TWO 협상의 결과로 농산물개방이 조만간 이루어지게 되면 쌀 생산을 중심으로 한 농업생산은 중국과 미국 등의 경쟁을 이기기가 상당히 어려워 질 것으로 생각된다. 또 쌀의 과잉생산으로 정부에서는 쌀 이외의 작물을 논에서 기르는 것을 장려하고 있다. 본 연구를 통해서 연재배 경제성과 재배된 연을 이용하여 다양한 차와 식품을 개발하는 것을 연구하였다. 먼저 연을 품종을 선별하였다. 본사에서 소유한 100여종의 연을 재배하여 식품으로 개발하기에 최적인 연을 선별하였다. 여러 가지 관능적인 미각 테스트와 생산량의 검정을 통해서 선별하였다. 일반적으로 많은 연들이 아린 기운이 많아서 식품으로 개발하기 어려웠다. 색깔이 진하면 진할 수록 아린 맛이 진하였다. 그러나 백련만은 맛도 우수하였고 생산성도 우수하였다. 식품으로 개발하기에 가장 적절한 시기를 조사하였다. 백련의 향은 시간이 갈수록 증가하다가 잎이 누렇게 변하면서 향이 떨어지기 시작하여 전 후가 가장 좋은 시기였다. 생산량은 시간이 갈수록 증가하였지만 이 추석 후에는 잎이 누렇게 변하기 시작하여 실제적으로 변하기 시작하여 식품으로 사용 가능한 생산량이 떨어 졌다. 수확된 제품을 연차와 연식품으로 개발하였다.

• Journal of Life Science
• /
• v.31 no.5
• /
• pp.511-519
• /
• 2021

The Perilla frutescens var. japonica HARA is widely cultivated in Korea for vegetable leaves and oil seeds. Perilla species have been used for food and medicine and are known to contain many functional compounds. In this study, we investigated the functional compound contents of Perilla during its growth stages to analyze the optimal harvest time and conditions. The contents of the Perilla sprouts were analyzed according to culture environment and days of growth. Sprouts grown in soil under natural light conditions showed high rosmarinic acid (23.19±0.16 mg/g) and GABA (0.55±0.05 mg/g) content. Therefore, the results suggest that 6 to 8 days after sowing in soil under natural light conditions was the optimum harvest condition for sprouts. Also, the functional compounds of Perilla were analyzed according to growth stage and plant part. As a result, caffeic acid and rosmarinic acid exhibited the highest content in the stage from vegetative growth to reproductive growth (0.28±0.03 ~ 0.30±0.07 mg/g rosmarinic acid and 20.60±7.02 ~ 19.37±3.18 mg/g caffeic acid), and luteolin and GABA showed the highest content in the reproductive growth stage and in the early stages of vegetative growth, respectively (31.11±2.98 ~ 22.35±1.64 ㎍/g luteolin and 0.42±0.09 ~ 0.37±0.04 mg/g GABA). It was confirmed that the content of caffeic acid (0.34±0.03 mg/g), rosmarinic acid (55.22±9.33 mg/g) and luteolin (1,044.89±6.72 ㎍/g) was the highest during the bolting stage. Overall, we identified the timing of the highest level of functional compounds in the sprouts and mature leaves of Perilla. These results suggest a suitable harvest time and conditions for sprouts and leaves for the use of Perilla as a functional material.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.139-145
• /
• 2011

The practice of asphalt pavement recycling has grown rapidly over the decade, one of which is the cold in-place recycling with the foamed asphalt (CIR-foam) or the emulsified asphalt (CIR-emulsion). Particularly, in Iowa, the CIR has been widely used in rehabilitating the rural highways because it significantly increases the service life of the existing pavement. The CIR layer is typically overlaid by the hot mix asphalt (HMA) to protect it from water ingress and traffic load and obtain the required pavement structure and texture. Most public agencies have different curing requirements based on the number of curing days or the maximum moisture contents for the CIR before placing the overlay. The main objective of this study is to develop a moisture loss index that the public agency can use to monitor the moisture content of CIR layers in preparation for a timely placement of the wearing surface. First, the moisture contents were measured in the field using a portable time domain reflectometry (TDR) device. Second, the weather information in terms of rain fall, air temperature, humidity and wind speed was collected from the same location. Finally, a moisture loss index was developed as a function of initial moisture content, air temperature, humidity and wind speed. The developed moisture loss index based on the field measurements would help the public agency to determine an optimum timing of an overlay placement without continually measuring moisture conditions in the field.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.6
• /
• pp.719-729
• /
• 2017

Recently, the field of agriculture has been gaining a new leap with the integration of ICT technology in agriculture. In particular, smart farms, which incorporate the Internet of Things (IoT) technology in agriculture, are in the spotlight. Smart farm technology collects and analyzes information such as temperature and humidity of the environment where crops are cultivated in real time using sensors to automatically control the devices necessary for harvesting crops in the control device, Environment. Although smart farm technology is paying attention as if it can solve everything, most of the research focuses only on increasing crop yields. This paper focuses on the development of a system architecture that can harvest high quality crops at the optimum stage rather than increase crop yields. In this paper, we have developed an architecture using apple trees as a sample and used the color information and weight information to predict the harvest time of apple trees. The simple board that collects color information and weight information and transmits it to the server side uses Arduino and adopts model-driven development (MDD) as development methodology. We have developed an architecture to provide services to PC users in the form of Web and to provide Smart Phone users with services in the form of hybrid apps. We also developed an architecture that uses beacon technology to provide orchestration information to users in real time.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.4
• /
• pp.451-462
• /
• 2005

Optimal Trajectory Correction Maneuver (TCM) design algorithm has been developed using the B-plane targeting method for future Korean Mars missions. For every-mission phase, trajectory informations can also be obtained using this developed algorithms which are essential to design optimal TCM strategy. The information were computed under minimum requiring perturbations to design Mars missions. Spacecraft can not be reached at designed aim point because of unexpected trajectory errors, caused by many perturbations and errors due to operating impulsive maneuvers during the cruising phase of missions. To maintain spacecraft's appropriate trajectory and deliver it to the designed aim point, B-plane targeting techniques are needed. A software NPSOL is used to solve this optimization problem, with the performance index of minimizing total amount of TCM's magnitude. And also executing time of maneuvers on be controlled for the user defined maneuver number $(1\~5)$ of TCMs. The constraints, the Mars arrival B-plane boundary conditions, are formulated for the problem. Results of this work show the ability to design and analyze overall Mars missions, from the Earth launch phase to Mars arrival phase including capture orbit status for future Korean Mars missions

• Korean journal of applied entomology
• /
• v.57 no.4
• /
• pp.329-337
• /
• 2018

To increase the mating rate of Bombus ignitus used as insect pollinator, we investigated the sexual maturity time of B. ignitus. In investigating ovary development such as the number of eggs per ovariole and spermatheca size, the time of sexual maturity of queen was 10 days after eclosion. In case of male, the number of sperm was 246 thousand at immediately after eclosion, and was highest as 480 thousand at 9 days, and tended to show a dramatic decline at 35 days (87 thousand). The more mating time, the less the number of sperm. In consideration of number of sperms, the time of sexual maturity of male was 3-15 days after eclosion. In the sexual maturity time of queen in mating, the queen was not mated at immediately after eclosion, and showed a decrease in 20 days. In terms of the rate of mating and oviposition, the favorable time for mating of queen was 9-20 days. On the other hand, the male showed 3.3% of mating at immediately after ecolosion, showed the highest of 43.3% at 6 days after eclosion, and tended to decrease in 25 days. The sexual maturity time for mating of male was 6-20 days. In summary, our results indicate that sexual maturity time of B. ignitus in reproductive organs and mating is most favorable in 9-12 days after eclosion for queen and 6-9 days for male.

• Korean Journal of Microbiology
• /
• v.49 no.4
• /
• pp.309-312
• /
• 2013

Fungal cell walls consist of various glucans and chitin. Fungi produce chitinases for their growth and development. The inky cap, Coprinellus congregatus, produces at least two different chitinases during its life cycle. Chitinase 1 (chi1) is expresses throughout its life cycle while chitinase 2 (chi2) is expressed at the mushroom autolysing phase. The cloned cDNA of chi1 is successfully expressed as a fusion protein with c-myc in Pichia pastoris, and purified by the affinity chromatography. The optimum pH and temperature of Chi1 was pH 8.0 and $35^{\circ}C$, respectively when 4-nitrophenyl N,N',N"-triacetyl-${\beta}$-D-chitotrioside was used as the substrate. The $K_m$ value and $V_{max}$ for the substrate was 0.780 mM and 0.10 OD $min^{-1}unit^{-1}$, respectively. The addition of purified Chi1 resulted in total growth inhibition against several plant pathogenic fungi such as Alternaria alternata, Fusarium graminearum and Trichoderma harzianum at the concentration of 60 ${\mu}g/ml$.