• Journal of the East Asian Society of Dietary Life
• /
• v.26 no.5
• /
• pp.427-434
• /
• 2016

The study was conducted to investigate quality properties and sensory characteristics of soup prepared with 0, 30, 40, and 50% soybean flour instead of wheat flour. Total moisture contents of soup among the different groups were not significantly different, whereas the ash, crude lipid, and crude protein contents of soup increased with increasing levels of soybean flour. pH and total acidity of the test sample added with soybean flour were similar compared to the control, whereas sugar content increased with higher amounts of soybean flour. In the chromaticity determination, L, a and b values increased with increasing level of soybean flour. Total polyphenol and flavonoid contents increased with increasing levels of soybean flour. The antioxidant activity of samples measured based on DPPH and ABTS radical scavenging activities were significantly higher than the control, and proportionally increased as the amount of soybean flour increased. In the sensory evaluation, addition of 40% soybean flour resulted in the best scores for flavor, taste, thickness, and overall acceptance. Addition of 40% soybean flour increased the intensity of softness and nutty taste and reduced oily taste compared to the control. These results suggest that addition of 40% soybean flour could be applied for preparation of cream soup.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 1995.12a
• /
• pp.9-21
• /
• 1995

A planning support system enhances our ability to use water capacity expansion as an urban growth management strategy. This paper reports the development of capacity expansion modeling of water supply as part of the continuing development of such a planning support system (PEGASUS: Planning Environment for Generation and Analysis of Spatial Urban Systems) to incorporate water supply, This system is designed from the understanding that land use and development drive the demand for infrastructure and infrastructure can have a significant influence on the ways in which land is developed and used. Capacity expansion Problems of water supply can be solved in two ways: 1) optimal control theory, and 2) mixed integer nonlinear programming (MINLP). Each method has its strengths and weaknesses. In this study the MINLP approach is used because of its strength of determining expansion sizing and timing simultaneously. A dynamic network optimization model and a water-distribution network analysis model can address the dynamic interdependence between water planning and land use planning. While the water-distribution network analysis model evaluates the performance of generated networks over time, the dynamic optimization model chooses alternatives to meet expanding water needs. In addition, the user and capacity expansion modeling-to-generate-alternatives (MGA) can generate alternatives. A cost benefit analysis module using a normalization technique helps in choosing the most economical among those alternatives. GIS provide a tool for estimating the volume of demanded water and showing results of the capacity expansion model.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.2
• /
• pp.155-170
• /
• 2020

In this paper, a risk management system applicable to NATM tunneling projects is proposed. After investigating case histories in NATM tunnel collapse, this paper analyzes the potential risk factors and their corresponding risk events during NATM tunnel construction. The risk factors are categorized into three groups: geological, design and construction risk factors. The risk events are also categorized into four types: excessive deformation, excessive deformation with subsidence, collapse inside tunnels, and collapse inside tunnels with subsidence. The paper identifies risk scenarios in consideration of the risk factors and proposes a risk analysis/evaluation method for the NATM tunnel risk scenarios. Based on the evaluation results, the optimal mitigation measure to handle the risk events is suggested. In order to effectively facilitate a series of risk management processes, it is necessary to develop a risk register and a management ledger for risk mitigation measures that are customized to NATM tunnels. Lastly, the risk management for an actual NATM tunnel construction site is performed to verify the validity of the proposed system.

• Journal of the Korean Society for Railway
• /
• v.14 no.4
• /
• pp.313-319
• /
• 2011

In a modern society, various type of transportation modes are utilized, among them the subway system is the one of the main transportation mode which more than 7.21 million people ride a day in Seoul. Due to the increased interests on the indoor air quality (IAQ) of underground facilities, public concerns on IAQ of subway system are increasing also. Platform screen door (PSD) recently installed at the whole stations of Seoul subway and tunnel washing-out appeared to be effective in reducing particulate matters in the platform and tunnel. However there has not been any attempt to improve IAQ of subway cabin inside. Most technologies for removing airborne particulate matters are known to be difficult to adopt on the subway cabin due to the problem of maintenance cost. Therefore, the object of this study is a practical development of cabin air cleaning system which can reduce the concentration of airborne particles and harmful gases at the same time. In this paper, we focused on the development of particle removing system utilizing a roll-filter for increasing operating time of air filter. The prototype of system was designed and manufactured based on the numerical prediction results. For rollfilter device, 5 candidate filter materials were tested in point of particle collection efficiency and pressure drop. It was found that the electrically charged filter material showed the highest performance among them.

• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.467-472
• /
• 2019

Growing smartphone usage in South Korea has also accelerated the pace of development of mobile games, but competition is intensifying as the market grows. As one of the factors for the success of the game in this mobile game market, UI has been presented, suggesting that the design of such mobile game UI should be approached in terms of designing the user's experience, along with its function, aesthetic expression, function-oriented design and information delivery before. In this paper, we propose an effective lobby layout of mobile RPG using experience among UX factors. Through the layout classification of Ernest Adams and Andrew Rollings, we selected 9 mobile RPGs in the 20th place of google play cumulative sales rankings and analyzed the layout of the lobby. As a result, the lobby layout of the game, which led the first market success of the mobile RPG genre, The result was that it became the standard of the boxed game. It can be interpreted that the lobby layout, which is similar to the game used previously by the user, is effective because low entry barriers and learning are unnecessary due to the experience of using the existing RPG. Future studies may produce a common layout of a broad genre if studies are conducted to measure the optimum UX for other genres than RPG.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.67-78
• /
• 2017

Traffic congestion cost is increasing annually. Specifically congestion caused by the CDB traffic contains more than a half of the total congestion cost. Recent advancement in the field of Big Data, AI paved the way to industry revolution 4.0. And, these new technologies creates tremendous changes in the traffic information dissemination. Eventually, accurate and timely traffic information will give a positive impact on decreasing traffic congestion cost. This study, therefore, focused on developing both recurrent and non-recurrent congestion prediction models on urban roads by adopting Recurrent Neural Network(RNN), a tribe in machine learning. Two hidden layers with scaled conjugate gradient backpropagation algorithm were selected, and tested. Result of the analysis driven the authors to 25 meaningful links out of 33 total links that have appropriate mean square errors. Authors concluded that RNN model is a feasible model to predict congestion.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.1
• /
• pp.59-67
• /
• 2013

Complex-shaped tall building causes many structural challenges due to its structural characteristics regarding inclined members and complexed shape. This paper is aimed at development of design process using computational-platform which is effective design tool for responding frequent design changes, particularly as to overseas projects. StrAuto, a parametric structural modeling and optimizing system, provides the optimized alternatives according to design intent and realize a swift process converting a series of structural information necessary to nonlinear analytical models. The application of the process was to a 45-story hotel building in Ulanbator, Mongolia adopting shear wall and special moment frame with outrigger systems. To investigate the safety of lateral force resisting system against maximum considered earthquake(MCE), nonlinear response history analysis was conducted using StrAuto.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.2
• /
• pp.187-193
• /
• 2017

This study evaluated tidal stream energy resources according to tidal flow properties around Uido off the west coast of, Jeollanam-do, South Korea. A feasibility study was first carried out through the collection of bathymetry data and tidal phase information. For this simulation, a depth-averaged 2D ADCIRC (Advanced Circulation) model for real sea situations was applied to a Finite Element Method (FEM) approach for tides given the variation of tidal current speed. Hydrodynamics were simulated with 4 major tidal constituents (M2, S2, K1, and O1) after setting up 4 observation points. From the real depth-averaged model simulation results, it was found that the spring tide Higher High Water (HHW) and tidal current speed values at the 4 observation points were about 2.2 m and 1.33 m/s, respectively. The ADCIRC model results were analyzed with reference to the Korea Hydrographic and Oceanographic Agency's (KHOA) observed data for verification. Furthermore, using topographical characteristics via the Tidal Flux Method (TFM), tidal energy density distribution was calculated, indicating a maximum tidal energy density of about $1.75kW/m^2$ for the 5 assessment areas around Uido. The tidal energy density was evaluated with consideration given to topographical characteristics as well as tidal elevation and tidal current speed to determine an optimum tidal farm candidate.

• Polymer(Korea)
• /
• v.38 no.6
• /
• pp.694-701
• /
• 2014

In this study, Polygomun aviculare L. (P. aviculare L.) extract loaded elastic liposomes (ELPs) were investigated to enhance the transdermal delivery of P. aviculare L. extract composed of various flavonoids. ELPs were composed of egg phospholipids (PC) and edge activator ($Tego^{(R)}$ care 450) and the physical properties and in vitro permeation studies of ELPs were performed. Particle size ranged from 148.1 to 262.2 nm and deformability index was recorded as 11.5~25.4. Loading efficiency was from 53.1 to 66.3%. In vitro skin permeation studies using Franz diffusion cell demonstrated that ELP-4 having ratio of 85:15 for PC to $Tego^{(R)}$ care 450 exhibited the higher skin permeability than ELP-1, the general liposome without $Tego^{(R)}$ care 450. It was visually seen by fluorescence image restoration microscopy. The findings suggest that ELP-4 selected as the optimal formulation could be used as useful formulation for transdermal delivery of the extract.

• Polymer(Korea)
• /
• v.37 no.4
• /
• pp.486-493
• /
• 2013

The structure, morphology, and physical properties of syndiotatic poly(vinyl alcohol) (s-PVA) gel spun fibers were investigated to prepare polymeric embolization coils. S-PVA was prepared by saponification of the poly(vinyl acetate)/poly(vinyl pivalate)(PVAc/PVPi) copolymer. The viscosity of s-PVA solutions showed shear thinning behavior and the solution formed a homogeneous phase. Based on shear viscosity change with concentration, the optimum dope concentration was selected as 13 wt%, after which s-PVA fibers were spun and the solvent was removed. The fibers were then drawn with a maximum draw ratio of 15. A polymeric embolization coil was made of the s-PVA gel-spun fibers. The fibers were wound densely onto rigid rod and then annealed at different annealing temperatures. The polymeric embolization coil annealed at $200^{\circ}C$ was similar to metallic coils and its shape was maintained well after extension. Overall, gel-spun PVA fibers performed well for the preparation of primary and secondary coils to replace metallic coils.