• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.47.4-47.4
• /
• 2009

초소형전기기계시스템(MEMS: Micro-Electro-Mechanical Systems) 기술로 제작된 마이크로미러 어레이를 장착한 MEMS 우주망원경은 특유의 광시야각 감시, 목표 확인, 확대 및 고속 추적 기능을 가지며 고층대기에서의 초대형 방전현상과 같이 넓은 영역에서 드물게 임의로 일어나는 섬광현상을 관측하기에 최적이다. 러시아 과학위성 Tatiana-2의 주 탑재체로 선정된 극소형 MEMS 우주망원경 MTEL(MEMS Telescope for Extreme Lightning)은 광시야각 감시와 목표 확인을 위한 트리거망원경, 목표 확대와 고속추적을 위한 확대망원경 및 섬광현상의 분광측정을 위한 분광계로 구성되어 있다. 1년간의 개발 및 성능 검증 후 MTEL은 위성탑재를 위한 모든 우주인증 시험을 성공적으로 마쳤다. 현재 MTEL은 Tatiana-2 위성에 탑재되어 있으며, 9월 18일에 우주로 발사되어 1-3년간 800km 궤도를 비행하며 지구 대기에서 발생하는 섬광현상을 관측할 예정이다. 이 발표에서는 MTEL 탑재체의 설계, 제작, 성능 측정 및 calibration 결과를 보고하고, 위성탑재를 위한 진동 및 충격, 열, 진공 및 전자기파 적합성 등의 우주인증 시험 결과 또한 보고한다. 또한 발사 후 과학위성 및 MTEL의 이 발표 때까지의 우주에서의 상황을 보고한다.

• The Journal of the Korea Contents Association
• /
• v.16 no.12
• /
• pp.373-382
• /
• 2016

Carbon dioxide Capture and Storage/Sequestration (CCS) technology has attracted attention as an ideal method for most carbon dioxide reduction needs. When the collected carbon dioxide is transported to storage via pipelines, the direct transport is made if the storage is close, otherwise it can also be transported via an intermediate storage hub. Determining the number and the location of the intermediate storage hubs is an important problem. A decision-making algorithm using a mathematical model for solving the problem requires considerably more variables and constraints to describe the multi-objective decision, but the computational complexity of the problem increases and it also does not guarantee the optimality. This research proposes an algorithm to determine the location and the number of the intermediate storage hub and develop a simulator for the connection network of the carbon dioxide emission site. The simulator also provides the course of transportation of the carbon dioxide. As a case study, this model is applied to Korea.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.6
• /
• pp.661-665
• /
• 2001

This paper deals with optimal mooring system to secure fish cage in a desired location, Through field investigation and paper works, we surveyed disasters by breakdown of cage frame and mooring system due to higher wave attack and selected compliant buoy mooring method for shallow water mooring system against severe coastal external forces. To analyze interaction between external forces and compliant buoy mooring system, theoretical model has developed as quasi-static nonlinear analysis. After verifying the feasibility of the numerical model compared with experiment, static analysis has tried for various mooring systems with different angle of array, number of mooring points, length of horizontal and inclined rope. Optimal mooring method using compliant buoy has selected for fish cage through numerical simulation. This results can apply for preliminary design for cage mooring system.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.1
• /
• pp.95-103
• /
• 2016

The absolute value management method is widely used in the most of the earth retaining construction, which evaluates the safety by comparing measurement result and management criteria. Therefore, the management criteria is the standard to evaluate the safety of the site, and in other words, the criteria is a direct factor of the evaluation. That means that the safety of the site can not be acquired if the management criteria is not proper, even though the measurement system is perfectly set. However, many of field technicians do not have rely on the current management criteria, and they even recognize the necessity of the revision. Therefore, in this study, the necessity of the revision was studied. Also, the optimum criteria selection and the application were performed based on the test results of earth retaining deflection and probabilistic theory. The absolute value management method was used for this study. The details are tabulated.

• Journal of Convergence for Information Technology
• /
• v.10 no.7
• /
• pp.138-146
• /
• 2020

The paper deals with comparative study of characteristics of surrogate models and sensitivity evaluation using design of experiments in order to enhance and analysis the structure design of an automatic salt collector under various design load conditions. Orthogonal array design based on numerical analysis was used for the design of experiments. The thickness sizing variables of main structure member were considered the design factors, and the output responses were selected from the strength performances as well as the weight. The quantitative effects on responses for each design factor were evaluated from the orthogonal array experiment. Optimum design case was also identified to improve the strength performances with weight minimization. Using the orthogonal array experiment. various surrogate models such as response surface model, Kriging model, and Chebyshev orthogonal polynomial were generated. The orthogonal array experiment results were validated by the surrogate modeling results. The most suitable surrogate model was the response surface model for the exploration of design space of the automatic salt collector.

• Korean Journal of Environment and Ecology
• /
• v.29 no.6
• /
• pp.947-951
• /
• 2015

This study presents proper irrigation interval for the soil condition of green roof system and the smooth growth of the landscaping herbaceous plants available and reveal the need for irrigation in rooftop conditions. Twenty kinds of greenery plants are tested on ground paved wood panels where rain and wind shielder is installed. Before test, irrigation is conducted fully to experimental plants and then soil moisture in pot is measured after every ten minutes. In conclusion, it is suggested that the irrigation has to be carried out every 4~5 days in order to minimize water and heat stress of plants. Also, irrigation management is an essential prerequisite for good condition and the smooth growth of plants and environmental effects in green roof system.

• Journal of Korea Water Resources Association
• /
• v.51 no.5
• /
• pp.383-393
• /
• 2018

The regional frequency analysis is the method which uses not only sample of target station but also sample of neighborhood stations in which are classified as hydrological homogeneous regions. Consequently, identification of homogeneous regions is a very important process in regional frequency analysis. In this study, homogeneous regions for regional frequency analysis of precipitation were identified by the self-organizing map (SOM) which is one of the artificial neural network. Geographical information and hourly rainfall data set were used in order to perform the SOM. Quantization error and topographic error were computed for identifying the optimal SOM map. As a result, the SOM model organized by $7{\times}6$ array with 42 nodes was selected and the selected stations were classified into 6 clusters for rainfall regional frequency analysis. According to results of the heterogeneity measure, all 6 clusters were identified as homogeneous regions and showed more homogeneous regions compared with the result of previous study.

• Polymer(Korea)
• /
• v.38 no.3
• /
• pp.327-332
• /
• 2014

Polymer/wood flour composites are recently attracting a lot of interest because they are economic and ecofriendly. In this study, the effects of wood flour size on the thermal and mechanical properties of a polypropylene/wood flour composite were investigated. Mechanical properties of the composite samples prepared by melt-mixing and compression molding were tested by UTM and an izod impact tester, and thermal properties of them were measured by TGA, DMA, DSC and TMA. The best coupling agent was selected by testing three kinds of maleic anhydride modified polypropylene coupling agents, and under the same condition, the effects of wood flour size on the physical properties of the composite were investigated. According to the test results for four different wood flour sizes of 600, 250, 180 and $150{\mu}m$, flexural strength, flexural modulus, crystallinity and water-resistivity of the composite increased with decreasing wood flour size.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.6
• /
• pp.1881-1891
• /
• 2014

Full system of turnkey deliberation committee in 2010 was abolished and permanent Deliberation committee was introduced. So far, ordering organization selected the best method suitable for the design and comprehensive evaluation method in the turnkey bid construction. Comprehensive evaluation method have bid price design score coordination, weighted basis, the best design approach fixed amount, five successful bidder decision method in addition. Design deliberation branch committee in the successful bidder decision way configured and operated branch members of special design consultation committee, But main agent changed from committee deliberation pull system to permanent committee deliberation, as well as and The lobby burden was not improved. This similar to the past at the portion of the design deliberation and the way of the design deliberation in the turnkey bid construction. Therefore it is necessary to improve the design deliberation system. In other words, design score and technology competition should be adapted to determine a successful bid. This study suggested the operating system of the design deliberation, the decision method problems of the successful bidder and ways to improve the design deliberation.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.365-368
• /
• 2008

This research is related to 240MPa ultra-high strength concrete(UHSC) with extremely loss W/B ratio. For this development, High flow cement is mainly used which has a short reaction rate due to the high blaine and high early strength, which can make greater fluidity in case of very low W/C ratio. It made the best mixture using the mineral admixtures silica fume, slag powder and special admixture. For dispersibility and homogeneity of cement binder, cement of premix type is produced using omni-mixer. Moreover, it ensures the fluidity of ultra-high strength concrete(UHSC). For having a good fire performance, we made an experiment special coarse aggregate. As a result, we got 180MPa in case of water curing, 200MPa in case of steam curing and uniform UHSC of 240MPa in case of a special curing method.