• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.33 no.3
• /
• pp.197-201
• /
• 2007

Oil soluble licorice extract(licorice extract) is an officially approved cosmetic component as a whitening ingredient in Korea. The durability of licorice, during which the whitening effect can be maintained in optimum condition, must be accurately defined. Since the cosmetics durability under real condition is relatively longer than its development time. It is needed to predict the real durability interval from the experimental measurement under simulated operating conditions. We analyzed the relationship between the licorice lifetime and the high temperature condition by using Arrhenius equation. We have established the constant stress test with temperature of $50^{\circ}C$, $55^{\circ}C$, and $60^{\circ}C$ condition, within which no formulation change of licorice products is expected for the accelerated stress test. In this paper, the lifetime of licorice in cosmetics was defined as time period for its 10% contents reduction. We observed that the lifetime of licorice is 580 h at $50^{\circ}C$, 319 h at $55^{\circ}C$ and 166 h at $60^{\circ}C$. Using the above experimental data, we obtained the equation for the relationship between the licorice lifetime and temperature as follows; log(lifetime)=-35.0243 + 1.15322$\times$(11604.83/temperature). From this equation, the lifetime of licorice at $25^{\circ}C$ can be estimated as 26 months. The estimated result was verified by measuring full lifetime of licorice. In fact, there was no significant difference between the estimated lifetime and real measurement within 95 % significance level. This study can be applied to other useful cosmetic components for the fast estimation of the exact durability.

• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.50-59
• /
• 2006

The risk of fault reactivation in the Gippsland Basin was calculated using the FAST (Fault Analysis Seal Technology) technique, which determines fault reactivation risk by estimating the increase in pore pressure required to cause reactivation within the present-day stress field. The stress regime in the Gippsland Basin is on the boundary between strike-slip and reverse faulting: maximum horizontal stress $({\sim}\;40.5\;Mpa/km)$ > vertical stress (21 Mpa/km) ${\sim}$ minimum horizontal stress (20 MPa/km). Pore pressure is hydrostatic above the Campanian Volcanics of the Golden Beach Subgroup. The NW-SE maximum horizontal stress orientation $(139^{\circ}N)$ determined herein is broadly consistent with previous estimates, and verifies a NW-SE maximum horizontal stress orientation in the Gippsland Basin. Fault reactivation risk in the Gippsland Basin was calculated using two fault strength scenarios; cohesionless faults $(C=0;{\mu}=0.65)$ and healed faults $(C=5.4;\;{\mu}=0.78)$. The orientations of faults with relatively high and relatively low reactivation potential are almost identical for healed and cohesionless fault strength scenarios. High-angle faults striking NE-SW are unlikely to reactivate in the current stress regime. High-angle faults oriented SSE-NNW and ENE-WSW have the highest fault reactivation risk. Additionally, low-angle faults (thrust faults) striking NE-SW have a relatively high risk of reactivation. The highest reactivation risk for optimally oriented faults corresponds to an estimated pore pressure increase (Delta-P) of 3.8 MPa $({\sim}548\;psi)$ for cohesionless faults and 15.6 MPa $({\sim}2262\;psi)$ for healed faults. The absolute values of pore pressure increase obtained from fault reactivation analysis presented in this paper are subject to large errors because of uncertainties in the geomechanical model (in situ stress and rock strength data). In particular, the maximum horizontal stress magnitude and fault strength data are poorly constrained. Therefore, fault reactivation analysis cannot be used to directly measure the maximum allowable pore pressure increase within a reservoir. We argue that fault reactivation analysis of this type can only be used for assessing the relative risk of fault reactivation and not to determine the maximum allowable pore pressure increase a fault can withstand prior to reactivation.

• Korean journal of applied entomology
• /
• v.58 no.4
• /
• pp.321-327
• /
• 2019

When Aphidius colemani mummies were stored at four different temperatures (6, 8, 10 and 12 ± 1℃), they could be stored at 8℃ for 10 days with over 50% adult emergence. A number of mummies of Rhopalosiphum padi parasitized by A. colemani adults emerged from mummies after 8℃ storage clearly reduced with increasing duration of storage and especially declined with storage longer than 13 days showing < 20% parasitism. However, there were no differences in aphid parasitisms by A. colemani on 3 to 10 days after storage. Over 3 day storage at 8℃ was adversely affected on survival of A. colemani adults. Therefore, cold storage of A. colemani adults is considered as an unsuitable method for mass production of biological control agent. When 2-day-old Meteorus pulchricornis cocoons were stored at 6, 8 and 10 ± 1℃, it was possible to be stored up to 63 days at 8℃, showing the highest emergence. With increasing of cold storage duration at 8℃, parasitism on 2^nd and 3^rd larval instar of Spodoptera litura by stored M. pulchricornis significantly reduced. However, parasitic rate by M. pulchricornis stored for 2 weeks was similar to that by 1 week stored ones. Therefore, M. pulchricornis cocoons could be stored up to 2 weeks at 8℃ for stockpiling before release.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.4 no.1 s.6
• /
• pp.15-29
• /
• 2005

Truck Shipment Safety Information, which is a part of the development of NERIS is divided into Optimal Route Guidance System and Emergency Response System. This research is for establishing an advance warning system, which aims for preventing damages(fire, explosion, gas-escape etc.) and detecting incidents that are able to happen during transporting hazardous materials in advance through monitoring the position of moving vehicles and the state of hazardous materials in real-time. This research is peformed to confirm the practical possibility of application of the advance warning system that monitors whether the hazardous materials transport vehicles move the allowed routes, finds the time and the location of incidents of the vehicles promptly and develops the emergency system that is able to respond to the incidents as well by using the technologies of CPS, CDMA and CIS with testing the ability of performance. As the results of the test, communication accuracies are 99$\%$ in freeway, 96$\%$ in arterial, 97$\%$ in hilly sections, 99$\%$ in normal sections, 96$\%$ in local sections, 99$\%$ in urban sections and 98$\%$ in tunnels. According to those results, the system has been recorded a high success rate of communication that enough to apply to the real site. However, the weak point appeared through the testing is that the system has a limitation of communication that is caused in the rural areas and certain areas where are fewer antennas that make communication possible between on-board unit and management server. Consequently, for the practical use of this system, it is essential to develop the exclusive en-board unit for the vehicles and find the method that supplements the receiving limitation of the GPS coordinates inside tunnels. Additionally, this system can be used to regulate illegal acts automatically such as illegal negligence of hazardous materials. And the system can be applied to the study about an application scheme as a guideline for transporting hazardous materials because there is no certain management system and act of toxic substances in Korea.

• Journal of Korean Society of Forest Science
• /
• v.99 no.1
• /
• pp.85-95
• /
• 2010

The purpose of this study was to quantitatively measure both growth performances and nutrient responses of Fraxinus rhynchophylla, Fraxinus mandshurica, Pinus koraiensis, and Abies holophylla seedlings, which are commercially planted in Korea, to nitrogen, phosphorus, and potassium fertilization. We used Dickson's quality index (QI) to compare growth performances and vector diagnosis to interpret nutrient status. Nitrogen fertilization increased more height and root collar diameter growth in F. rhynchophylla and F. mandshurica relative to no fertilization treatment. The QI of F. rhynchophylla and F. mandshurica was the highest on N treatment, but there were no significant differences between treatments for P. koraiensis and A. holophylla. Nitrogen fertilization increased total dry weight by 43, 41, 26, -9% for F. rhynchophylla, F. mandshurica, P. koraiensis and A. holophylla, respectively. In F. rhynchophylla, N fertilization increased N contents with similar N concentrations ("sufficiency"), decreased both P concentrations and P contents ("antagonism"), and decreased K contents with similar K concentrations ("toxic accumulation"). In P. koraiensis, N fertilization decreased N, P, and K concentrations because of more dry weight increases compared to uptaken contents ("dilution"), but N fertilization decreased N, P, and K contents with similar N, P, and K concentrations ("toxic accumulation"). In the light of quality index and vector diagnosis, F. rhynchophylla and F. mandshurica seedlings treated with N fertilization would have high field performance.

• Journal of Korean Ophthalmic Optics Society
• /
• v.21 no.3
• /
• pp.259-264
• /
• 2016

Purpose: To establish the cause of decrease in body stability and to analyze the effects on sensory organs maintaining static balance according to the induced astigmatic blur. Methods: Twenty subjects (10 males, 10 females; mean age, $23.40{\pm}2.70years$) were participated in this study. To induce myopic simple astigmatism, the axis directions of cylindrical lenses were placed $180^{\circ}$ on both eyes (with-the-rule), $90^{\circ}$ on both eyes (against-the-rule), and $45^{\circ}$ on both eyes (oblique). Cylindrical lenses of +0.50, +1.00, +1.50, +2.00, +3.00, +4.00, and +5.00 D were used to increase astigmatic blur in each astigmatism types. General stability (ST) and sway power (SP) in frequencies by each sensory organs were analyzed using the TETRAX biofeedback system. Results: ST in the all astigmatism types were raised with increase of astigmatic blur compared to full corrected condition, but a significant difference only showed in the induced oblique astigmatism. According to the results of correlation analysis between ST and SP in the each frequencies with increase of astigmatic blur, the causes of increased ST in the induced oblique astigmatism showed to have a high correlation in order of somatosensory system (high-medium frequency), central nervous system (high frequency), peripheral vestibular system (low-medium frequency), and visual system (low frequency). Conclusions: The visual information by uncorrected oblique astigmatism may disturb the normal functions of all sensory organs maintaining body balance, consequently, the body stability can be reduced. Therefore, optimal correction of astigmatism can play an important role for reducing the instability of body balance.

• Journal of Animal Environmental Science
• /
• v.9 no.2
• /
• pp.103-112
• /
• 2003

In this study, the distributions of internal climates such as air temperature, humidity, dust, ammonia gas, and air velocity were systematically measured at a mechanically ventilated broiler houses during summer season, with local weather data. The analysis was focused on the suitability, stability, and uniformity of internal climate, resulting in serious stress on chickens and decrease of productivity In the mechanically ventilated broiler house, the difference between measured and recommended air temperatures(suitability) was 10.4C in maximum during the summer time. The difference of air temperature in the house between day and night was $8.7^{\circ}C$ in maximum. And maximal hourly range of internal air temperature at 0.4m height from the floor was $3.7^{\circ}C$ suggesting it maintained thermal uniformity in the broiler house. The $NH_3$ and dust concentrations were pretty low because ventilation was fully performed. The air speed at chicken location was measured 2.2m/s and 1.7m/s, respectively without and with chicken existence.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.9
• /
• pp.5-16
• /
• 2012

In the case of using the soil materials created by cutting in-situ ground directly without adjusting particle size, it is recommendable to seek the compaction property or material constant required for filling design or density control through indoor test, and many studies on this subject have been carried out during that time. The researches conducted during that time, however, were focused on the mixed materials with different diameters that exist in a natural condition. There has been no study conducted using coal fly ash that is by-product of the thermal power plant that is actively considered as the building materials. Therefore, this study was aimed at implementing compaction test and examining the basic engineering property in order to explore the influence of crushing the particles through compacting the admixture of crushed stone and coal fly ash produced from thermal power plant on its engineering property, and then the impact of the admixture volume of each material on compaction property and material property by conducting the One-Dimensional Compression Test. As result of compaction test, the optimum moisture ratio of coal fly ash was shown to be approx. 23%. As result of compaction test in accordance with the mixed ratio of coal fly ash and crushed stone under the same compaction energy and moisture ratio, dry unit weight tended to drop when the mixed ratio of coal fly ash exceeded 30%, while it reached approx. $1.81gf/cm^3$ when the mixed ratio was 30%. As result of One-Dimensional Compression Test in accordance with the mixed ratio of crushed stone and coal fly ash, the change in void ratio by particle crushing was at the highest level in the case of coal fly ash 100%, while the lowest level in the case of crushed stone 100%. In the case of mixed materials of crushed stone and coal fly ash, compression index was at the lowest level in case of coal fly ash 30%, and therefore this ratio of mixed material was judged to be the most stable from an engineering aspect.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.3
• /
• pp.256-267
• /
• 1987

Changes of light intensity under and above shading materials were measured at different relative light intensity(R.L.I. 5% of common straw shading, 15% of polyester shading and 20% of polyester shading at 12 o'clock on clear day) and lines(lst, 3rd and 5th lines) on clear and cloudy days in 5-year -old ginseng plant populations. Rates of photosynthesis and respiration, microclimate and root yield were also measured in field. Air temperature of R.L.I. 5% were lower 2$^{\circ}C$ compared with R.L.I. 15% and lower 3$^{\circ}C$ compared with R. L. I. 20% from 12 to 14 o'clock on clear day, but there were not difference among R. L. I. on cloudy day. Relative humidity of R. L. I. 5% were higher 5% compared compared with R.L.I. 20% from 10 to 14 o'clock on clear day, R. L. I. on cloudy day. Light intensity were below 5,000 lux at R.L.I. 5%, about 15,000 lux at R.L.I. 15% and about 20,000 lux at R.L.I. 20% from 10 to 15 o'clock on clear day. But light intensity were below 3, 000 lux at R. L. I. 5% about 10, 000 lux at R. L. I. 15% and about 15, 000 lux at R. L. I. 20% from 10 to 15 o'clock on cloudy. Photosynthetic rate of R.L.I. 15% and R.L.I. 20% were higher compared with R.L.I. 5% on clear and cloudy days. Tatal photosynthesis in a day were increased by R.L.I. 5%, 20%, 15% in turn on clear and cloudy days. R. L. I. 15% and 20% were not notable difference of photosynthetic rates among lines but R. L. I. with R. L. I. 15%, and higher 8% but there were not different among 5% was notable difference of one. Root fresh weight were increased by R.L.I. 5%, 20% and 15% in turn and R.L.I. 15% and 20% were not notable difference of root yield among lines but R. L. I. 5% was notable difference of one.

• Journal of Animal Science and Technology
• /
• v.47 no.4
• /
• pp.607-614
• /
• 2005

To determine the optimum fermentation condition, the 50:50 feed mixture of both crushed corn and wet brewer’s grain were anaerobically fermented at various conditions. Three supplementation levels(0, 2%, and 5%) of molasses, five supplementation levels(0, 0.1%, 0.5%, 1.0%, and 2.0%) of yeast and five different incubation temperatures(4$^{\circ}C$, 10$^{\circ}C$, 30$^{\circ}C$, 40$^{\circ}C$ and 50$^{\circ}C$) were tested to determine the optimum fermentation conditions. During fermentation, alcohol concentration, live yeast cell number (LYCN) and pH values of the mixture were analyzed. Alcohol concentrations of the fermented feed mixtures were proportionally increased with increasing level of molasses supplementation. After 24hr fermentation, alcohol concentrations at 0.1%, 0.5%, 1.0% and 2.0% of yeast supplementation was 1.9%, 2.4%, 3.1% and 3.1%, respectively. These results indicate a proportional increase of alcohol concentration with the increasing supplementation of yeast (P<0.05) up to 1%, thereafter showing plateau at 2% supplementation. LYCN was relatively high with more than 0.5% yeast supplementation, whereas the value was significantly low(P<0.05) at 0.1% yeast supplementation. Alcohol production was significantly higher at 30$^{\circ}C$ and 40$^{\circ}C$ than other incubation temperatures (P<0.05), with the highest concentration at 30$^{\circ}C$. pH was rapidly decreased until 24 hours of incubation with steeper decrease at lower temperatures(P<0.05). Based on there results, optimum fermentation conditions for the alcoholic-fermented feed production could be achieved with 5% supplementation of molasses, 1% supplementation of yeast, and 24hr long incubation at 30$^{\circ}C$.