• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.4 s.38
• /
• pp.27-36
• /
• 2006

Conventionally, in order to get accurate geolocation of satellite images we need a set of ground control points with respect to individual scenes. In this paper, we tested the possibilities of modeling satellite orbits from individual scenes by establishing a sensor model for one scene and by applying the model, which was derived from the same orbital segment, to other scenes that has been acquired from the same orbital segment. We investigated orbit-attitude models with several interpolation methods and with various parameter sets to be adjusted. We used 7 satellite images of SPOT-3 with a length of 420km and ground control points acquired from GPS surveying. Results of the conventional individual scene modeling hardly introduced differences among different interpolation methods and different adjustment parameter sets. As the results of orbit modeling, the best model was the one with Lagrange interpolation for position/velocity and linear interpolation for attitude and with position/angle bias as parameter sets. The best model showed that it is possible to model orbital segments of 420km with ground control points measured within one scene (60km).

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.6
• /
• pp.458-467
• /
• 2019

The purpose of this study is the suggestion of optimized parameters in OI (Optimal Interpolation) by experimental study. The observation of applying optimal interpolation is ADCP (Acoustic Doppler Current Profiler) data at the southwestern sea of Korea. FVCOM (Finite Volume Coastal Ocean Model) is used for the barotropic model. OI is to the estimation of the gain matrix by a minimum value between the background error covariance and the observation error covariance using the least square method. The scaling factor and correlation radius are very important parameters for OI. It is used to calculate the weight between observation data and model data in the model domain. The optimized parameters from the experiments were found by the Taylor diagram. Constantly each observation point requires optimizing each parameter for the best assimilation. Also, a high accuracy of numerical model means background error covariance is low and then it can decrease all of the parameters in OI. In conclusion, it is expected to have prepared the foundation for research for the selection of ocean observation points and the construction of ocean prediction systems in the future.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.289-295
• /
• 2005

LMTT (Linear Motor-based Transfer Techn-ology) is a horizontal transfer system for the yard automation This system is based on PMLSM (Permanent Magnetic Linear Synchronous Motor) toot consists of stator modules on the rail and shuttle car. In this research, the kriging interpolation method with sequential sampling find the optimum design of mover in LMTT. The design variables are considered as the transverse, longitudinal and wheel beam's thicknesses. The objective function is set up as weight, while the constant function are set up as the stresses generated by four loading conditions. The objective function is set up as weight. The optimum results obtained by the suggested method are compared with those by the GENESIS.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.23-23
• /
• 2020

하구 관측은 조사 방법 및 주기에 따라 크게 두 가지로 구분되는데, 첫째는 현장에서 직접 주기적으로 자료를 수집하는 정기 현장관측과 다른 하나는 고정된 지점에 관측소를 설치하여 실시간으로 연속된 자료를 수집하는 실시간 관측으로 분류된다. 본 연구는 하구 관측망 체계를 확립하기 위한 기초 연구로서 금강하구역을 대상으로 모의된 수치 모델 자료를 이용하여 관측망을 설계하기 위한 대표 모니터링 지표를 선정하고, 이를 기반으로 관측 지점을 설계하기 위한 전략을 제시하였다. 대표 모니터링 지표는 실제 현장에서 일반적으로 취득할 수 있는 6가지 항목(수온, 염분, 용존산소, 클로로필a, 총질소, 총인)을 대상으로 EOF 분석을 실시하여 해역의 시공간 분포를 대표할 수 있다고 판단되는 2개의 항목을 선정하였다. 대표 모니터링 지점은 2개의 대표 모니터링 지표에 대한 고유 벡터 사이의 각도를 벡터의 내적으로 계산하고 이를 설계변수로 활용하여 도식최적화 기법을 통해 각 모니터링 항목들에 대한 공간 분포를 가장 잘 재현해 낼 수 있는 지점의 개수와 위치를 선정하였다. 선정된 모니터링 지점들을 이용하여 재구성된 공간 분포를 참값(수치모델)과 비교하여 통계적 적정성 여부를 평가하였으며, 이를 통해 금강하구의 대표 모니터링 지점들을 도출 해 내었다. 금강하구의 정기 현장 관측에 대한 대표 모니터링 지점은 7개로 선정되었으며, 이들은 6가지 관측 항목들에 대해서 매우 높은 공간분포 재현율을 확보할 수 있음을 확인하였다. 또한, 담수가 비정기적으로 방류되는 금강하구 시스템의 지역적 특성에 대한 시계열 정보를 연속적으로 가장 잘 취득할 수 있는 실시간 관측소 설치 영역을 결정하기 위하여, 7개의 대표 모니터링 지점에서의 시계열 정보를 금강하구둑 전면과 외해의 시계열 정보와 비교분석하여 설치가능 지점을 영역으로 제언하였다.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.20 no.1
• /
• pp.1-15
• /
• 2015

Impacts of Sea Surface Temperature (SST) assimilation to the prediction of upper ocean temperature is investigated by using a regional ocean forecasting system, in which 3-dimensional optimal interpolation is applied. In the present study, Sea Surface Temperature and Sea Ice Analysis (OSTIA) dataset is adopted for the daily SST assimilation. This study mainly compares two experimental results with (Exp. DA) and without data assimilation (Exp. NoDA). When comparing both results with OSTIA SST data during Sept. 2011, Exp. NoDA shows Root Mean Square Error (RMSE) of about $1.5^{\circ}C$ at 24, 48, 72 forecast hour. On the other hand, Exp. DA yields the relatively lower RMSE of below $0.8^{\circ}C$ at all forecast hour. In particular, RMSE from Exp. DA reaches $0.57^{\circ}C$ at 24 forecast hour, indicating that the assimilation of daily SST (i.e., OSTIA) improves the performance in the early SST prediction. Furthermore, reduction ratio of RMSE in the Exp. DA reaches over 60% in the Yellow and East seas. In order to examine impacts in the shallow costal region, the SST measured by eight moored buoys around Korean peninsula is compared with both experiments. Exp. DA reveals reduction ratio of RMSE over 70% in all season except for summer, showing the contribution of OSTIA assimilation to the short-range prediction in the coastal region. In addition, the effect of SST assimilation in the upper ocean temperature is examined by the comparison with Argo data in the East Sea. The comparison shows that RMSE from Exp. DA is reduced by $1.5^{\circ}C$ up to 100 m depth in winter where vertical mixing is strong. Thus, SST assimilation is found to be efficient also in the upper ocean prediction. However, the temperature below the mixed layer in winter reveals larger difference in Exp. DA, implying that SST assimilation has still a limitation to the prediction of ocean interior.