• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7A
• /
• pp.635-640
• /
• 2002

We investigate optimal and suboptimal decision rules for parallel code acquisition in chip asynchronous direct-sequence spread-spectrum systems. The conventional decision rule for parallel acquisition is to choose the largest correlator output of a receiver. However, such a scheme is optimum only for chip synchronous models. In this paper, an optimal decision rule is derived based on the maximum-likehood criterion for chip asynchronous models. A simpler suboptimal decision rule is also discussed. The performance of the optimum and suboptimum decision rules is compared to that of the conventional decision rule. Numerical results show that, for chip asynchronous models, both the optimal and suboptimal decision rules outperform the conventional decision rule.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11b
• /
• pp.850-854
• /
• 2010

본 연구는 ANP법을 활용하여 전평시 군수지원 시스템에 대한 운용평가 방안을 제시하였다. 이러한 평가를 위하여 본 연구에서는 군 실정에 부합한 평가기준 재정립하여 기준별 구체적인 평가방법을 제시하였다. 그에따라 연구에서는 시뮬레이션을 이용하여 시스템 운용의 최적조합을 판단하는 과정과 정수계획법을 통한 수리적 모델링으로 군수품의 배송비용에 대한 경제성 평가를 제시하였고 회귀분석을 통한 효용성 평가와 IPB에 의한 군수품 수송의 안정성 평가를 실시하였다. 마지막으로 이러한 각 평가 결과를 ANP법을 이용한 종합 평가치를 산출하여 전평시 지휘관 및 참모의 부대지휘절차간에 구체적인 방책구상 및 선정시 지휘관이 최적의 의사결정할 수 있도록 하였다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.11 no.5
• /
• pp.373-378
• /
• 2001

The optimization method based on an enhanced genetic algorithms is for multimodal function optimization in this paper. This method is consisted of two main steps. The first step is a global search step using the genetic algorithm(GA) and function assurance criterion(FAC). The belonging of an population to initial solution group is decided according to the FAC. The second step is to decide the similarity between individuals, and to research the optimum solutions by single point method in reconstructive search space. Four numerical examples are also presented in this papers to comparing with conventional methods.

• Journal of Korea Water Resources Association
• /
• v.33 no.6
• /
• pp.733-744
• /
• 2000

Due to the randomness of reservoir inflow and supply demand it is not easy to establish an optimal reservoir operation rule. However, the operation rule can be derived by the implicit stochastic optimization approach using synthetic inflow data with some demand satisfied. In this study the optimal reservoir operation which was reasonably formulated as Linear Tracking model for maximizing the hydro-energy of seven reservoirs system in the Han river was performed by use of the optimal control theory. Here the operation model made to satisfy the 2001st year demand in the capital area inputted the synthetic inflow data generated by multi-site Markov model. Based on the regressions and statistic analyses of the optimal operation results, monthly reservoir operation rules were developed with the seasonal probabilities of the reservoir stages. The comparatively larger dams which would have more controllability such as Hwacheon, Soyanggang, and Chungju had better regressions between the storages and outflows. The effectiveness of the rules was verified by the simulation during actually operating period.period.

• Journal of Nutrition and Health
• /
• v.51 no.1
• /
• pp.73-86
• /
• 2018

Purpose: The aim of this study was to design optimized food intake patterns that meet the nutritional recommendations with minimal changes from the current food intake patterns among Korean adults using linear programming. Methods: Data of a one day 24-hour dietary recall from the 2010 ~ 2014 Korea National Health and Nutrition Survey were used to quantify the food items that Korean adults usually consumed. These food items were categorized into seven groups and 24 subgroups. The mean intakes and intake distributions of the food groups and the food subgroups were calculated for eight age (19 ~ 29, 30 ~ 49, 50 ~ 64, and over 65 years old) and gender (male and female) groups. A linear programming model was constructed to minimize the difference between the optimized and mean intakes of the food subgroups while meeting the Dietary Reference Intakes for Koreans (KDRIs) for energy and 13 nutrients, and not exceeding the typical quantities of each food subgroup consumed by the respective age and gender groups. Results: The optimized food intake patterns, which were a set of quantities of 24 food subgroups, were obtained mathematically for eight age and gender groups. Overall, major modifications of current diet were required to increase the intake of vegetables and milk/dairy products and decrease the Kimchi intake. The optimized intake of seasonings, including salt, was calculated to be 0 g for all the age and gender groups. Conclusion: The optimized food intake patterns designed using linear programming in this study lack feasibility because they suggest a seasoning consumption of 0 g. Modification of intake goal for sodium is needed to obtain optimized food intake patterns with improved feasibility.

• The Korean Journal of Applied Statistics
• /
• v.7 no.2
• /
• pp.183-200
• /
• 1994

Data-adaptive sequential suboptimal designs for very complex computer simulation codes are considered based on a spatial prediction model. These designs are constructed for two simulators of the computational nuclear fusion devices model. The difficulty of constructing the optimal designs due to the irregular design region, and its alternatives are also discussed with some computational algorithms for obtaining the designs.

• Journal of the Korean Magnetics Society
• /
• v.20 no.6
• /
• pp.239-243
• /
• 2010

This paper deals with the optimum design criteria for the premium efficiency of 250 kW traction induction motor, using response surface methodology (RSM) and finite element method (FEM). The focus of this paper is found firstly a design solution through the comparison of torque according to rotor bar shape, rotor dimensions variations. And secondly a mixed resolution with central composite design (CCD) is introduced and analysis of variance (ANOVA) is conducted to determine the significance of the fitted regression model. The proposed procedure allows to be optimized the rotor copper bar shape, rotor slot, rotor dimensions starting from an existing motor or a preliminary design.

• Journal of Korea Water Resources Association
• /
• v.35 no.1
• /
• pp.51-64
• /
• 2002

In this study, the formulation of the developed mixed-integer programming model for a multi-reservoir system including hydro-electric power generation (park et al., 2001) has been improved for multiple reservoir system operation using risk evaluation criteria. Sequential linear programming(SLP) was applied for the linearization of the hydro-electric energy term in the model. In order to allocate monthly reservoir release reasonably the value of weight for hydro-electric energy was assigned by level of power generation hour. The improved model was applied to the five reservoirs system in the Han river. And could be confirmed the availibility of new formulation appling risk evaluation criteria.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.10a
• /
• pp.254-262
• /
• 1999

실시간 시뮬레이션에서 주어지는 다양한 종류의 불연속적인 파라미터 값을 가지는 데이터 테이블에서 실시간의 제약 하에서의 검색을 수행하기 위해서는 최적의 기법이 요구된다. 실시간의 제약 하에서 최적 기법의 기준이 되는 것은 보통의 알고리즘들과는 달리 평균 속도가 아니라 worst case에서의 속도가 된다. 검색 알고리즘 들은 iteration을 거치게 되므로 총 탐색에 걸리는 시간은 iteration의 수(logical speed)와 1 probe를 수행하는 데 걸리는 시간(실제 수행속도)의 곱으로 정의된다. 본 연구에서 총 탐색에 걸리는 시간을 이론적으로 계산한 검색 속도 기존의 수행한 수치비교시험의 결과와 대체로 일치하였고, 이분 검색법이 iteration의 수와 실제 수행시간 모두에 있어서 가장 우수하다. 한편, 검색하고자 하는 파라미터 값의 dynamics를 이용하여 주어진 데이터 테이블 내의 검색 영역을 축소시키는 dynamic-window 개념을 도입하여 검색 알고리즘의 속도를 향상시킬 수 있었다. 이 개념의 도입은 데이터 테이블의 형태에 민감한 보간 검색법(interpolation method)과 그 응용 기법들에 대해 탁월한 효과를 나타내었다. 결론적으로 일반적 데이터 테이블에 있어서는 이분 검색법이 logical speed와 실제 수행속도가 우수하고, dynamic-window 개념을 도입한 보간 검색법과 그 변형들은 logical speed가 탁월하게 향상된다.

• Proceedings of the KOR-KST Conference
• /
• 1998.10a
• /
• pp.342-351
• /
• 1998

노면표시는 운전자에게 시선유도와 각종 규제 및 지시에 대한 정보를 제공함으로써 교통안전 및 소통에 도움을 주는 시설로써 주야간의 시인성 확보가 중요하며 이를 위해서는 반사화가 필요하다. 노면표시의 반사성능은 유리알 (Glass Bead)의 함량 및 종류, 용융온도, 도료의 색도등 각 영향인자에 의해 결정되지만 현재는 시공법 및 관련 연구의 미흡으로 현행기준의 최하수준을 상회하는 정도로 제공되고 있다. 따라서 본 연구에서는 노면표시의 시공에 관계되는 각 요인중 반사성능가 내구성에 영향을 미치는 주요인자 및 반사성능을 최적화하기 위한 인자별 최적조합을 도출하였다. 연구결과 유리알 살포량이 중량비로 25%-30%, 용융시 온도가 $188^{\circ}C$$\pm$$10^{\circ}C$일 때 노면표면시의 반사성능이 최적화됨을 밝혀내었다. 또한 유리알의 품질개선과 함께 황색 노면표시의 재귀반사 휘도계수 기준을 현재 기준보다 상향조정할 필요성이 있음을 제안하였다.