• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.2 s.72
• /
• pp.213-219
• /
• 2006

Topology optimization problem requires numerous repeated evaluations of objective function and design sensitivity for elements within design domain with various density distributions. The recently proposed two-level condensation scheme(TLCS) is very promising for the construction of reduced system and for an accurate and efficient analysis concerned about eigenvalue and dynamic problems. We used the two-level dynamic condensation scheme for the analysis and sensitivity computation part in the structural topology optimization problem. The results of the topology optimization for the reduced system show the TLCS provides high accuracy and computation efficiency compared to the full scale system within engineering accuracy.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.274-277
• /
• 1999

자동차 오디오는 차량의 상품성에 큰 영향을 미치고 있다. 고급 차량일수륵 또한 젊은 층일수록 차량 구매시 선택의 기준이 되기도 한다 그러나 자동차 오디오는 크게 두가지 면에서 가정용 오디오와 차이가 있다. 첫번째는 청취공간이 매우 헙소하다는 것이고 둘째로는 주행시 차량소음이 차 실내로 유입되어 오디오 음질에 영향을 미친다. 차 실내는 즘은 공간 음향폭성으로 인한 음향 dip 현상이 발생하며 이는 오디오 음질의 왜곡을 가져오므로 이를 개선하기 위해서는 라우드스피커 최적배치 뿐 아니라 주행소음에 대한 시험 및 분석을 하여 오디오 음질에 영향을 주는 주파수 밴드를 파악하여야 한다 본 논문에서는 오디오 음에 차량소음이 섞인 경우에 대하여 차량의 라우드스피커 위치는 변경하지 않고 라우드스피커의 주파수 밴드별 출력을 디지털필터를 이용하여 수정하는 방법으로 음질 개선을 제안하였다. 디지털 필터의 보정치는 차량 주행소음 특성과 차 실내 음향특성을 고려하였다. 차량소음을 섞은 주파수 옥타브 밴드 분석법을 이용한 객관적인 분석과 감성적 분석법인 NCB곡선으로 차량소음을 분식하여 디지털 필터 보정치를 구하는데 사용하였다. 제안한 9가지 디지털 필터를 이용하여 차량소음과 음악을 합성하였고 이중에서 좋은 음질에 대한 판정을 하기 위해 Scheffe가 제안한 7점 주관 평가법을 사용하여 64명이 내린 주관평가를 수행하였다.

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.669-682
• /
• 1997

[$Bj\ddot{o}rk$] and Skieller concluded after following facial growth patterns using implants in upper and lower jaw bones that stable structures, which are not influenced by the growth do exist and so these must be the reference landmarks in the process of superimposition. In spite of such facts, for the last 40 years since the discovery of stable structures, most orthodontists have preferred best fit superimposition method to structural method. Cases such as Angle's Class II division 2 malocclusion that show characteristic forward and upward growth or one under long period of post-treatment observation demonstrate that distinct differences exist between the two methods of superimposition. Today, ethical concerns prohibit further growth studies that use implants, md so there is no choice but to use stable structural superimposition method based on $Bj\ddot{o}rk's$ data. Thus, to encourage clinical use of stable structural superimposition method, logic for the use of stable structural superimposition method will be demonstrated, and its technical methods of application will be introduced step by step.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.8
• /
• pp.781-788
• /
• 2008

This study shows how to find out optimum co-substrate conditions and continuous operating parameters for maximum acidification of three different organic wastes - livestock wastewater, sewage sludge and food waste. Design of experiments and statistical analysis were revealed as appropriate optimization schemes in this study. Analyses of data obtained from batch tests demonstrated the optimum substrate mixing ratio, which was determined by maximum total volatile fatty acids(TVFA) increase and soluble chemical oxygen demand(SCOD) increase simultaneously. Suggested optimum mixing ratio of livestock wastewater, sewage sludge and food waste was 0.4 : 1.0 : 1.1 based on COD, respectively. Response surface methodology(RSM) contributed to find out optimum operating parameter - hydraulic retention time(HRT) and substrate concentration - for the semi-continuous acidogenic fermentation of mixed organic wastes. The optimum condition for maximum TVFA increase was 2 days of HRT and 29,237 mg COD/L. Empirical equations obtained through regression analysis could predict that TVFA increase would be 73%. To confirm the validity of the statistical experimental strategies, a confirmation experiment was conducted under the obtained optimum conditions, and relative error between theoretical and experimental results was within 4%. This result reflects that using statistical and RSM technique can be effectively used for the optimization of real waste treatment processes.

• Environmental Analysis Health and Toxicology
• /
• v.17 no.3
• /
• pp.265-272
• /
• 2002

This study was carried out with the detection for multiresidue of the organophosphorus pesticides such as malathion, parathion. diazinon, and carbamate pesticide such as carbaryl, by enzyme-inhibition method. The acetylcholinesterase (AChE) and cholinesterase (ChE) activities in chicken brain determined by the Ellman's method were 166.6 and 5.8 $\mu$mol/min/g protein, and in chicken plasma were 23.1 and 8.3 $\mu$mol/min/g protein, respectively. The optimum pH of AChE and ChE was 8.2 and 7.8, respectively. The Km of AChE and ChE was 0.034 and 0.045 mM, respectively. I$\_$50/ for AChE and ChE by some organophosphorus was 55.82 and 99.42 mg/L of malathion, 31.16 and 29.13 mg/L of parathion, and 17.89 and 19.62 mg/L of diazinon, respectively. I$\_$50/ for AChE and ChE by carbaryl of carbamate was 0.10 and 0.05 mg/L, respectively. The 0.07 mg/L of drinking water advisory level for carbaryl could be detected with I$\_$50/ of AChE and ChE. Enzyme-Inhibition (EI) method with AChE and ChE was used the multiresidue method to detect the 1 mg/L of the carbamate pesticides.

• Journal of Korea Water Resources Association
• /
• v.51 no.1
• /
• pp.61-70
• /
• 2018

This study examined how to determine the optimal sediment level in dam reservoir for efficient plan and operation of dam. Currently, Korea is applying a horizontally accumulated method for sediment level estimation for the safety design of dam and so the method estimated relatively higher level than others. However, the sediment level of dam reservoir should be accurately estimated because it is an important factor in assessing life cycle of a dam. The sediment level in dam reservoir can be determined by SED-2D model linked with RMA-2, horizontally accumulated method, area increment method, and empirical area reduction method. The estimated sediment level from each method was compared with the observed sediment level measured in 2007 in Imha dam reservoir, Korea and then the optimal method was determined. Also, the future sediment level was predicted by each method for the future trend analysis of sediment level. As the results, the most accurate sediment level was estimated by the empirical area reduction method and the future trend of sediment level variation followed the past trend. Therefore, we have found that the empirical area reduction method is a proper one for more accurate estimation of sediment level and it can be validated by the results from a numerical model of SED-2D linked with RMA-2 model.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.2
• /
• pp.354-360
• /
• 2022

The aluminum handrails used for promoting structural strength and weight reduction of the topside in an offshore platform are designed according to international standards (ISO, NORSOK, and Austria Standard), and consider the most conservative load combinations. Existing aluminum handrails are bolted to a socket when installed on the topside of a platform, and the amount of deflection of the handrail is largely influenced by the socket design. However, the importance of socket design has been overlooked, and furthermore, separate evaluation procedures or guidance for socket design are ambiguous. Therefore, a series analysis was performed for estimating the structural strength of aluminum handrails to obtain the governing parameters that minimize their deflection against loads. Experimental verification was performed to validate the structural safety of the new model, and we confirmed that all were satisfied within allowable deflection according to international standards. The developed model could be used in several areas in the future as it is lighter and more productive compared to existing models from overseas makers.

• Journal of Environmental Impact Assessment
• /
• v.24 no.4
• /
• pp.386-395
• /
• 2015

In order to assess sewage treatment technology necessary to achieve water quality criteria in the watershed and to ensure best treatment technology is applied in building and expanding PSTWs when establishing the Watershed Sewer System Maintenance Plan, it is necessary to develop assessment guidelines to determinate the best treatment technologies applicable to the public sewage treatment works(PSTWs). Sewage treatment technologies such as anaerobic-anoxic-aerobic treatment process are employed at PSTWs, and treatment efficiency varies due to many factors such as how the PSTWs are operated. Therefore, analyzing assessment guideline of best available technology(BAT) using currently in USA and EU, this study presents assessment parameters for the assessment guidelines to be used in determining the best treatment technologies applicable to PSTWs. We have a plan to implement pilot assessment in preparation for the final assessment guidelines based on the results of professionals survey and to determine weighted factors and assessment parameters using analytic hierarchy process (AHP).

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.2
• /
• pp.293-300
• /
• 2012

This study was to investigate the unsuitable rate of the storage facilities, the changes in corrosion process over time after installation according to the status, the time to install the facilities, years elapsed after facilities installation, inspection of methods and motivation, and so on, based on the results of the inspection at the petroleum storage facilities conducted by domestic soil-relate specialized agency to derive optimal management plans which meet the status of soil contamination facilities. The results showed that the facilities more than 5 years after the initial leak test at the time of the installation need to be inspected periodically by considering costs of leak test and remediation of polluted soil. The inspection period can be decided by cost and leak test methods showing discrepancies for the results obtained from individual test whether it was direct or indirect. To compensate these matters, we suggested that the direct inspection method on regular schedule is recommended. On the other hand, the inspection can be voluntarily completed to ease burden of the results by inspection or equivalent level to this inspection method. Also, it may need improved construction supervision and performance test system to minimize the occurrence of the nature defects in installing the facilities as well as the upgrade program for the facilities during intervals of inspection period.

• Analytical Science and Technology
• /
• v.26 no.2
• /
• pp.142-153
• /
• 2013

A new, rapid, and simple analytical method was developed and validated using high performance liquid chromatograph-photodiode array detector (HPLC-PAD) for the determination of lepimectin residues in agricultural commodities. The lepimectin residues in samples were extracted with methanol, partitioned with dichloromethane, and then purified with glass column filled with subsequently to aminopropyl ($NH_2$) solid phase extraction (SPE) cartridge. The purified samples were detected using HPLC-PAD. Correlation coefficient ($R^2$) of both lepimectin $A_3$ and $A_4$ solutions were 0.9999. The method was validated using cucumber spiked with lepimectin at 0.02 and 0.2 mg/kg and pepper, mandarin, hulled rice, potato, soybean at 0.02 and 0.5 mg/kg. Average recoveries were 76.0~114.8% with relative standard deviation less than 10%, and limit of detection (LOD) and limit of quantification (LOQ) were 0.005 and 0.01 mg/kg, respectively. The result of recoveries and overall coefficient of variation of a laboratory results in Gwangju regional KFDA and Daejeon regional KFDA was followed with Codex guideline (CAC/GL 40). Therefore, developed method in this study is accurate, rapid, and appropriate for lepimectin determination and will be used to keep safety of lepimectin residues in agricultural products.