• The KIPS Transactions:PartB
• /
• v.15B no.4
• /
• pp.275-284
• /
• 2008

With increases in recent security requirements, biometric technology such as fingerprints, faces and iris recognitions have been widely used in many applications including door access control, personal authentication for computers, internet banking, automatic teller machines and border-crossing controls. Finger vein recognition uses the unique patterns of finger veins in order to identify individuals at a high level of accuracy. This paper proposes new device and methods for touchless finger vein recognition. This research presents the following five advantages compared to previous works. First, by using a minimal guiding structure for the finger tip, side and the back of finger, we were able to obtain touchless finger vein images without causing much inconvenience to user. Second, by using a hot mirror, which was slanted at the angle of 45 degrees in front of the camera, we were able to reduce the depth of the capturing device. Consequently, it would be possible to use the device in many applications having size limitations such as mobile phones. Third, we used the holistic texture information of the finger veins based on a LBP (Local Binary Pattern) without needing to extract accurate finger vein regions. By using this method, we were able to reduce the effect of non-uniform illumination including shaded and highly saturated areas. Fourth, we enhanced recognition performance by excluding non-finger vein regions. Fifth, when matching the extracted finger vein code with the enrolled one, by using the bit-shift in both the horizontal and vertical directions, we could reduce the authentic variations caused by the translation and rotation of finger. Experimental results showed that the EER (Equal Error Rate) was 0.07423% and the total processing time was 91.4ms.

• Restorative Dentistry and Endodontics
• /
• v.35 no.4
• /
• pp.235-237
• /
• 2010

When curing the composite restorations with light curing units, the light guides are often in direct contact with oral tissues, therefore contamination of light guides is inevitable. Curing light guides fall into the "semicritical" instrument category according to the Centers for Disease Control and Prevention (CDC) and must be heat or vapor-sterilized or at a minimum, these semicritical instruments must be sterilized in a liquid chemical agent. Currently, most common methods of maintaining sterility of the light guides are wiping the guide with a disinfectant, such as glutaraldehyde, after each patient use; using autoclavable guides; using presterilized, single-use plastic guides; and using translucent disposable barriers to cover the guide.

• Proceedings of the KAIS Fall Conference
• /
• 2002.05a
• /
• pp.99-101
• /
• 2002

효율적인 기업 경영을 위해서는 업무의 전산화 작업이 필요하다는 것은 이미 널리 알려진 사항이다. 또한 전산화작업도 요즈음에는 어느 곳에서든지 접촉이 가능한 인터넷을 이용해 실시간 업무에 대한 접근이 가능하도록 설계되어지고 있다. 그래야만 데이터의 효율적 관리와 업무능력을 향상시킬 수 있다. 이러한 요구를 충족시키기 위해서 전산화가 미진한 기업에 한꺼번에 큰 변화를 주는 것은 오히려 업무상의 효율을 저하시킬 수 있으므로 기업경영에 가장 기본이 되는 생산관리, 영업관리, 자재관리 등을 분야로 나누어 개발하는 것이 기업의 부작용을 최소한 줄이는 것이 경제적, 기능적 측면에서 매우 유리할 것이다. 본 연구에서는 신화기업의 업무가 지금까지 단순히 수작업으로만 해왔던 기업내의 모든 관리를 생산관리, 영업관리, 자재관리 둥의 분야로 나누어 개발한 뒤 나중에 각각의 독립된 업무를 통합하고 또한 이를 인터넷을 이용하여 원격지에서 요구하는 자료의 접근이 가능하게 하는 인터넷 업무 전산화 작업 개발에 목적을 두고 있다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.9 no.1
• /
• pp.79-83
• /
• 1969

1) 가능(可能)한한 조직(組織)이 변형(變形)되지 않아야 한다. 2) Atmospheric pressure를 이용(利用)하기 위(爲)하여 peripheral border 에 있어서의 조직변형(組織變形)이 필요(必要)한 경과(境過)는 그 정도(程度)가 eiastic force가 retentive force 보다 크지 않도록 최소한(最小限)으로 해야 한다. 3) Denture base와 조직(組織)의 원형간(原形間)에는 접촉(接觸)이 밀접(密接)해야 한다. 그래야 saliva의 film 균일(均一)하고 얇게 될 수 있다. 4) Atmospheric pressure는 denture의 retention과 중요(重要)한 연관성이 있으므로 physiologic seal area를 형성(形成)해 주는 것이 유리(有利)하다. 5) Ridge의 형태(形態)도 denture의 retention 대(對)한 하나의 중요(重要)한 인자(因子)이다. 6) Denture에 의(依)해서 피개(被蓋)되는 면적(面積)은 retention에 관계(關係)되는 한 인자(因子)로써 피개면적(被蓋面積)이 클수록 유지력(維持力)이 커진다. 7) Saliva의 viscosity도 retention의 한 인자(因子)가 된다. 8) Friction은 retention의 한 인자(因子)가 될수는 있으나 병인적(病因的)인 증상(症狀)을 유발(誘發)할수 있으므로 이용(利用)해서는 않된다.

• The Journal of the Korean dental association
• /
• v.25 no.8 s.219
• /
• pp.735-739
• /
• 1987

implant라는 것은 생리학적으로 생체에 있어서 이물이라는것을 인식해야 한다. 또 그 일부를 상부구조물을 제작하기 위하여 구강내에 노출시킴으로써 연조직과의 접촉부위가 감염으로 염증상태를 지속하고 있다. 그뿐아니라 저작시에 교합압에 의한 위격으로 골내에 여러 가지 변화를 일으킨다. 이와같이 생체내에 이물를 implant 하였을 때 생기는 반응은 생체의 방어기전으로서 염증을 일으키는데 이 염증의 진도에 따라 동화, 흡수, 배제중의 어느 하나로 결말짓게 된다. 따라서 implant를 시술하였을때 생기는 조직의 반응을 최소한으로 감소하기 위한 생물학적 적응조건으로서 재료, 약물, 기구, 시술방법 등을 잘 선택하는 것이 implant의 임상응용에 요절이 되는것이다. implant의 종류는 실로 다양다종이다. 그러나 어떤 implant와 시술방법을 선택하든지 악골에 접착, 또는 식위하여 견고하게 장착되어 그 implant된 자체를 통하여 가장 천연치에 가까운 기능을 얻는것이 implant의 시술목적이다. 임상의가 implant를 시술하면서 이것이 과연 성공할것인가? 즉 저작효율과 내구연한이 얼마나 갈것인가 우려하지 않을수 없다. 그러므로 그 우려를 덜고 성공으로 이끄는 임상상의 문제점을 찾아 논하기로 한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.5
• /
• pp.521-526
• /
• 2020

Airfield pavements, such as runways and taxiways, are essential for smooth take-off and landing of fixed-wing aircraft and are the most important installation for the military to carry out air operations during wartime. Therefore, in wartime, it is necessary to reduce the damage to these installations and repair them in the shortest possible time. Recently, the pattern of attack is changing from the use of conventional high explosive which is to create large craters to the use of multiple warheads weapon system which is to effectively attack enemy's airfields but unrelated to accuracy. Hence in this study, through identifying the specification and composition of multiple warheads weapon system, we checked the protection performance and damage patterns of the pavement when explosion occurred on the installed military runway and taxiway by the multiple warheads weapon system. And The multiple warheads weapon systems is able to cause extensive damage but the destructive power of each warhead is not as great, so I would like to propose an airfield pavement design plan for minimal protection against such attacks.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.2
• /
• pp.207-212
• /
• 2016

High-frequency induction hardening (HFIH) is used in many industries and has a number of advantages, including reliability and repeatability. It is a non-contact method of providing energy-efficient heat in the minimum amount of time without using a flame. Recently, HFIH has been actively studied using the finite-element method (FEM), however, these studies only focused on the accuracy of the analysis. In this paper, we analyzed HFIH by using a variable frequency based on the conditions of the same shape and input power then comparing the analysis results to experimental results. The analysis and experimental results indicate that the hardening depths are approximately the same using the optimal frequency of 3kHz.

• Conservation Science in Museum
• /
• v.22
• /
• pp.85-96
• /
• 2019

The restoration of ceramics excavated in fragments is limited by the difficulty of inferring the overall shape of the original object. However, recent innovations in digital technology can help to overcome the limits of conventional restoration using handwork. This study explored the potential of digital technology by digitally restoring a shard from a white porcelain water dropper excavated at a kiln site at Sindae-ri. In order to complete the digital restoration, 3D scanning was applied to obtain scan data, and 3D modeling and texture mapping were performed. In this way, three-dimensional data with patterns and color information was acquired and the original form of the water dropper could be ascertained based on the shard. The study found that the data acquired from digital restoration can be used for various purposes, including for obtaining data on cross-sections or missing portions of a relic.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.12
• /
• pp.2508-2519
• /
• 1994

In this thesis, two possible schemes for power feeding are considered. The first one is the network power feeding, and the other is the power feeding from the rechargeable battery. Though each scheme has its merits and demerits, the domestic network operator has proposed the latter due to the large deviation of line resistance, high power loss, and safety. This scheme, however, has several problems. The usage is limited by the life of battery leading to the failure of minimal voice service for many hours. The space occupation of that battery is another serious problem. Moreover, the network opeator should have overhead of maintenance and repair. In order to alleviate such the difficulties, the sealing current is introduced through the subscriber loop. Flowing the current into the loop prevents from rusting. This thesis designs a power controller using PEB2025 to control various amount, duration, and period of this sealing current, to achieve the optimum current supply for sealing.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.3
• /
• pp.183-189
• /
• 2022

COVID-19 is also influencing the coffee industry. This will increase untact consumption, a new consumption trend. Consumption utilizing online channels and delivery service applications that represent untact consumption is becoming commonplace. The coffee industry is also increasingly using coffee shops with drive-through and smart ordering systems that can be ordered with minimal contact. While most of the untact services are preempted at franchise stores, many independent coffee shops still offer differentiated services by communicating directly with customers. However, along with the prolonged COVID-19 infection, coffee shops in the present era, which cannot be free from infectious diseases, have no choice but to worry about delivery services. Therefore, this study analyzed the factors that influence coffee delivery services. Research results due to the influence of COVID-19, regular delivery services have increased along with coffee delivery services. Regular delivery services will play a central role in coffee delivery services due to increased use of home cafes by consumers who want to enjoy coffee in various ways.