• Title/Summary/Keyword: 최소편의 실험

Search Result 32, Processing Time 0.022 seconds

Appraisal Study on Tensile Test Method of Mechanical Properties of FRP Composite Used in Strengthening RC Members (구조보강용 FRP 복합체의 역학적 특성치 분석을 위한 인장시험방법 평가 연구)

  • You, Young-Chan;Choi, Ki-Sun;Kang, In-Seok;Kim, Keung-Hwan
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.12 no.1
    • /
    • pp.73-80
    • /
    • 2008
  • Experimental study has been performed in order to construct the standard test methods and appraisal criteria by investigating the influence of specimen types(property, width, layers) and loading rate on the tensile characteristics of FRP used in strengthening RC structures. The FRP composite tested in this study are the unidirectional CFRP sheet/strip and the bidirectional GFRP sheet. Test variables consist of the various width ranging from 10mm to 25mm and number of CFRP sheets plied up to 5 layers. Test results indicated that maximum tensile strength and minimum coefficient of variation are recorded at each different width according to the fiber types and weaving directions. Also, the average tensile strengths of CFRP sheets are decreased as the number of layer of CFRP sheet are increased.

A Study on Wearing Tests of Mastectomy Brassieres with Prostheses (유방절제환자를 위한 보정용 브래지어와 부속물 착장실험연구(III))

  • Hei-Sun Choi;Kyung Mi Lee
    • Journal of the Korean Home Economics Association
    • /
    • v.40 no.8
    • /
    • pp.13-21
    • /
    • 2002
  • 본 연구의 목적은 유방절제수술을 받은 여성들을 위해 개발한 다섯 종류의 브래지어와 두 종류의 보정물 유형에 따른 착용감과 쾌적성을 검토하기 위한 것이다. 피험자로는 유방절제시술기간이 3년 이상이며 브래지어 사이즈 85에 컵사이즈 A컵인 여성 세 명을 선정하였다. 실험방법은 보정물을 삽입한 브래지어를 하루에 최소 15시간 이상 연속착용하도록 하고 실험복을 착용한 상태에서 피험자들의 일상과 그에 소요된 시간을 기록하도록 하였으며 이 때 착용한 브래지어와 보정물에 대한 느낌을 5점 척도로 표시하게 하였다. 실험기간은 다섯 종류의 브래지어를 하루에 한 가지씩 정해진 순서대로, 처음 5일은 옥보정물과 함께 착용하도록 하고 그 후 5일은 스펀지 보정물과 함께 착용하도록 하였으며 이러한 순서를 두 번 반복하게 하여 총 20일이 소요되었다. 각각의 피험자들에 대해서는 실험이 진행되는 동안 반복적인 면접을 통하여 진행상황을 기록하였으며 아울러 실험복에 대한 제언을 수렴하여 보다 나은 제품개발을 위한 기본 자료화하였다. 실험결과는 다음과 같다. 1. 브래지어에 있어서는 세 명의 피험자가 일치된 결과를 나타내어 일반적인 브래지어 형태와 가장 유사하면서 어깨 끈과 하변밴드 폭만 약간 넓혀준 실험복이 착용감에서 가장 높은 점수를 받았다. 착용자의 편의를 고려하여 앞트임으로 제작한 실험복의 경우에는 앞으로 구부렸을 때 밴드부분이 꺾이는 현상이 생겼으며 피험자들이 모두 뒤트임에 익숙하여 앞트임 브래지어 착용에 불편함을 나타내었다. 브래지어 착장평가에 있어서는 피험자들의 일상적인 행동이나 보정물의 종류가 영향을 미치지 않는 것으로 나타났다 2. 보정물 평가에 있어서는 모든 피험자가 옥가루 재질의 보정물만으로는 수술부위를 자극하는 느낌이 든다고 하였으나 3mm 두께의 스펀지와 함께 삽입했을 때는 아무런 문제가 없는 것으로 나타났다. 또한 보정물의 무게 조절이 가능하므로 실리콘재질의 보정물에서 쉽게 찾아볼 수 있는 무게에 대한 문제를 제기한 피험자는 없었다. 그러나 스펀지로 제작된 보정물에 대해서는 무게가 너무 가벼워 모든 피험자들이 양 쪽 가슴의 균형이 잘 맞지 않는다고 답하였으며 특히, 운동을 즐기고 활동이 많은 피험자의 경우 스펀지로 제작된 보정물에 대해 큰불만을 표시하였다.

Design and Manufacture of Improved Obstacle-Overcoming type Indoor Moving and Lifting Electric Wheelchair (향상된 장애물 극복형 실내 이·승강 전동휠체어의 설계 및 제작)

  • Kim, Young-Pil;Ham, Hun-Ju;Hong, Sung-Hee;Ko, Seok-Cheol
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.21 no.11
    • /
    • pp.851-860
    • /
    • 2020
  • With an increase in the aging population and a rising social interest in health and welfare, studies to improve healthcare in the elderly are being actively conducted. This study attempted to improve the current design and manufacture of elevating electric wheelchairs to enhance user safety and convenience. Seat design based on the user's body shape, convenience while boarding or alighting, caster turning radius and, safety and stability features that prevent shaking when the user gets up or sits down were improved. A driving experiment was conducted to evaluate the operation of the indoor electric wheelchair designed and manufactured with these additional functionalities. During the test, the performance parameters evaluated were continuous driving time, turning radius, maximum lifting and lowering load, maximum lifting height, noise level, minimum distance sensing by the driving auxiliary sensor, ability to interact with server and app programs, and the duty cycle maximum error rate. The test confirmed that this improved electric wheelchair successfully met target parameters. In a future study, we will evaluate this improved electric wheelchair from a user's perspective for its usability parameters, such as satisfaction, convenience and stability.

Optimized Path Finding Algorithm for Walking Convenience of the People with Reduced Mobility (교통약자의 이동편의를 위한 최적경로 탐색 기법)

  • Moon, Mikyeong;Lee, Youngmin;Yu, Kiyun;Kim, Jiyoung
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.34 no.3
    • /
    • pp.273-282
    • /
    • 2016
  • There has been growing social interest recently in the movement rights of people with reduced mobility. However, it simply eliminates the temporary inconvenience of walking of people with reduced mobility because it focuses only on supply of institutional facilities. Therefore, we look forward to improving movement welfare by proposing an optimized path finding algorithm for people with reduced mobility that takes into consideration physical elements affecting their movement, such as slope, steps etc. We selected Walking barrier factor by analyzing previous studies and calculated the relative importance of Walking barrier factors using an Analytic Hierarchy Process(AHP). Next, through the fuzzy system, the Walking disturbance level of link, which integrates the weights of Walking barrier factors and the attributes of each link, is derived. Then, Walking path cost that takes into consideration the ‘length’ factors is calculated and an optimized path for people with reduced mobility is searched using Dijkstra’s Algorithm. Nineteen different paths were searched and we confirmed that the derived paths are meaningful in terms of improving the mobility of people with reduced mobility by conducting a field test. We look forward to improving movement welfare by providing a navigation service using the path finding algorithm proposed in this study.

A comparison study of various robust regression estimators using simulation (시뮬레이션을 통한 다양한 로버스트 회귀추정량의 비교 연구)

  • Jang, Soohee;Yoon, Jungyeon;Chun, Heuiju
    • The Korean Journal of Applied Statistics
    • /
    • v.29 no.3
    • /
    • pp.471-485
    • /
    • 2016
  • Least squares (LS) regression is a classic method for regression that is optimal under assumptions of regression and usual observations. However, the presence of unusual data in the LS method leads to seriously distorted estimates. Therefore, various robust estimation methods are proposed to circumvent the limitations of traditional LS regression. Among these, there are M-estimators based on maximum likelihood estimation (MLE), L-estimators based on linear combinations of order statistics and R-estimators based on a linear combinations of the ordered residuals. In this paper, robust regression estimators with high breakdown point and/or with high efficiency are compared under several simulated situations. The paper analyses and compares distributions of estimates as well as relative efficiencies calculated from mean squared errors (MSE) in the simulation study. We conclude that MM-estimators or GR-estimators are a good choice for the real data application.

User-friendly adjustable table fan with selective rotation angles (사용 편의성 향상을 위한 선풍기의 효율적 회전구간 선정)

  • Kim, Sang-Hyun
    • The Journal of the Convergence on Culture Technology
    • /
    • v.8 no.2
    • /
    • pp.53-58
    • /
    • 2022
  • Since a general household fan has only one left/right turning stage, the rotation angle cannot be adjusted leading to cases whether the wind reaches to an unnecessary area or vice versa. In this paper, we propose a method to efficiently control the turning section to selectively send wind to a necessary space while reducing energy waste. The minimum rotation angle was obtained by experimentally measured the stationary wind direction angle of the fan, and the optimal number of turning stages was selected by appropriately dividing the space where the wind reaches. Through this, it was confirmed that if the fan has a minimum rotation angle of 45°, a turning section of 3 stages and its rotation angle is increased by twice the stationary wind direction angle at each stage, the wind is distributed efficiently. Therefore, it is considered that the selective turning stage control proposed in this paper can minimize energy waste without significant change of the fan structure.

Augmented Reality Interface Using Efficient Hand Gesture Recognition (효율적인 손동작 인식을 이용한 증강현실 인터페이스)

  • Choi, Jun-Yeong;Park, Han-Hoon;Park, Jong-Il
    • 한국HCI학회:학술대회논문집
    • /
    • 2008.02a
    • /
    • pp.91-96
    • /
    • 2008
  • 증강현실(Augmented Reality)을 위한 효과적인 비전 기반 인터페이스 개발은 꾸준히 진행되어 왔으나, 대부분 환경적 제약을 받거나, 특수한 장비 혹은 복잡한 모델을 요구한다. 예를 들어, 마커를 이용하면 구현 상의 편의성과 정확성을 보장하지만, 일반적으로 마커는 환경과 대비되는 모양을 가지기 때문에, 사용자에게 거부감을 줄 수 있으며 무엇보다 복잡한 인터랙션에는 적용되기 힘들다. 한편, 손동작을 이용할 경우, 자연스럽고 다양한 인터랙션을 수행할 수 있지만, 색을 이용한 손동작 인식은 복잡한 환경에서 인식률이 크게 저하되고, 3 차원 모델 기반의 손동작 인식은 많은 연산량을 필요로 한다는 문제점을 가진다. 이로 인해 지금까지 제안된 방법을 증강현실 시스템에 적용하는 데는 한계가 있다. 본 논문에서는 기본적으로 손동작을 이용한 인터페이스를 제안하는데, 손동작 인식을 위한 알고리즘을 효율적으로 개선함으로써, 복잡한 환경에서 적은 연산량으로 자연스러운 인터랙션을 제공하고자 한다. 제안방법은 손목에 컬러 밴드를 착용하고, 색 정보를 이용하여 손을 포함하는 최소 영역을 용이하게 검출함으로써, 손 동작 인식률이 좋아지도록 하였다. 제안된 인터페이스는 손의 자연스러운 움직임을 감지해서 손의 모양과 동작에 따라서 가상의 물체를 자연스럽게 제어할 수 있도록 해 준다. 예를 들어, 손이 지정한 위치에 가상의 물체를 나타내고, 가상의 물체를 잡고 다양한 조작을 하는 등의 제어를 할 수 있다. 다양한 환경에서의 실험 및 사용자 평가를 통해 제안된 인터페이스의 유용성을 검증하였다.

  • PDF

Fresh-cut사과 전처리에 따른 물성학적 품질 특성

  • 박연주;최소영;김인호;문광덕
    • Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
    • /
    • 2003.04a
    • /
    • pp.118-118
    • /
    • 2003
  • 편의와 fresh-like quality를 선호하는 소비 경향에 맞추어 가공한 fresh-cut사과의 선도 연장을 위한 저해제를 탐색하였다. 실험에 사용된 사과는 박피하여 속심을 제거한 사과를 8조각으로 절단하여 저해제에 3분간 침지한 후 물기를 제거하고 각각 LDPE 포장지에 포장하여 실온에서 저장하면서 colorimeter와 rheometer를 이용하여 색도와 물성을 측정하였다. 저해제로는 1% ascorbic acid, citric acid, NaCl, MgCl$_2$, CaCl$_2$, KCl, CaSO$_4$, MgSO$_4$, $Na_2$SO$_4$, oxalic acid, calcium lactate, calcium citrate를 사용하였으며 천연저해제로는 건칡, 맥문동, 목향, Rhubarb, 당귀, 오약, 시체, 지각, 천문동, 청피, 계피, 구기자, 당귀, 진피, 감초, 녹차, 후추 등을 열수추출하여 사용하였다. 물리적인 변화는 시간이 경과함에 따라 감소하는 추세를 보였으며 일부 건조로 인해 texture의 증가를 나타내기도 했다. 처리에 따른 물리적인 변화로는 CaCl$_2$, NaSO$_4$, Cl, 시금치를 처리하였을 때 그 변화가 가장 작았으나 시금치의 경우 시금치로 인한 사과의 색변화로 관능적으로 좋지 않았다. 한약재는 목향, 당귀, 지각, 계피를 처리하였을 때 물리적인 변화가 가장 작았으나 시금치와 마찬가지로 처리 초기에 한약재 자체의 향과 색으로 인하여 관능적으로 좋지 못한 결과를 나타냈다. 갈변 정도를 나타내는 ΔE의 변화는 KCl과 CaCl$_2$, CaSO$_4$를 처리한 구에서 변화가 가장 작았으며 한약재를 처리하였을 경우 당귀, 천문동을 처리한 구에서 효과를 보였다. oxalic acid는 갈변저해에는 효과적이었으나 시간이 경과함에 따라 수분의 용출이 증가하였으며 물성의 변화도 컸다. 또한 ZnCl$_2$를 처리한 구에서는 이취 발생과 수분 용출이 컸으며 색의 변화도 컸다.

  • PDF

최소가공 과일의 갈변저해를 위한 저해제의 탐색

  • 박연주;최소영;김영언;문광덕
    • Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
    • /
    • 2003.04a
    • /
    • pp.119.1-119
    • /
    • 2003
  • 단체 급식의 증가와 더불어 편의식품을 선호하는 소비 경향에 맞추어 최소가공한 과일의 갈변저해를 위한 저해제를 탐색하였다. 실험에 사용한 과일은 배와 감으로 각각 박피하여 속심을 제거한 후 배는 8조각으로 절단하고 감은 1~2cm 두께로 slice 하였다. 저해제는 1% ascorbic acid, citric acid, NaCl, MgCl$_2$, CaCl$_2$, oxalic acid, EDTA, raffinose, salicylic acit, sporix를 사용하였다. 또한 열수 추출한 오약, 계피, 황기, 당기, 건칡, 진피, 천궁, 감초 등도 저해제로 사용하였다. 최소가공한 과일은 저해제에 3분간 침지한 후 물기를 제거하고 tray에 포장하여 실온에서 저장하면서 colorimeter를 이용하여 갈변도의 변화를 측정하였다. 갈변 정도를 나타내는 $\Delta$E 는 시간의 경과에 따라 점차 감소하는 경향을 보였으나 배의 경우 변화 정도가 크지 않았다. NaCl, MgCl$_2$, CaCl$_2$를 처리한 배의 갈변 정도가 가장 적었다. cysteine을 처리한 구에서는 황화합물 냄새가 났다. 또한 oxalic acid를 처리한 구에서는 연화가 빠르게 일어났으며 저장 시간이 경과함에 따라 수분이 용출되었다. 한약재는 자체 색으로 인해 배의 색변화를 증가시켰으며 이취가 발생했다. 또한 저장 시간이 경과함에 따라 건조가 빠르게 일어나 관능적으로도 좋지 않은 결과를 나타냈다. 감에서는 CaCl$_2$, MgCl$_2$를 처리한 구에서 색의 변화가 가장 적었으며 cysteine은 색변화는 적었으나 배의 경우과 같이 이취가 발생하였다. 한약제는 계피와 진피를 처리한 감에서 색의 변화를 저해하는 효과를 보였다.를 처리하였을 경우 당귀, 천문동을 처리한 구에서 효과를 보였다. oxalic acid는 갈변저해에는 효과적이었으나 시간이 경과함에 따라 수분의 용출이 증가하였으며 물성의 변화도 컸다. 또한 ZnCl$_2$를 처리한 구에서는 이취 발생과 수분 용출이 컸으며 색의 변화도 컸다.내었다. 고온 단시간 처리구의 경우 저온 장시간 처리구와는 달리 저장 1일 후부터 그 농도가 다소 상승되었다가 다시 감소는 경향을 보였다. 한편 열처리하여 냉각시킨 직후 및 저장1주 후 사과의 pH, 산도, 당도, 경도, 과육의 갈변도 등을 조사하였던 바 대조구 및 처리구간에 일부 항목에 있어서는 약간의 차이를 나타내었다. 대치할 수 있을 것이라고 사료된다. 수분함량은 기계적 검사보다 관능검사와 더욱 높은 상관관계를 나타냈다.내었다. 항균활성이 우수한 생약재를 농도별로 활성을 조사한 결과, 물 추출물과 10% Ethanol 추출물 모두 낮은 농도에서도 우수한 항균활성을 나타내었다.취와 함께 점질성 갈변물질이 생성되었다. 이와 같은 결과로 볼 때, BAAG의 처리는 BAAC의 경우보다 가격은 저렴하면서도 항균력은 우수한 천연 항균복합제재로써 농산물 식품원료에 적용하여 선도유지 기간을 연장할 수 있는 효과를 기대할 수 있었다. 과일 등의 포장제로서 이용할 가능성을 확인하였다.로 [-wh] 겹의문사는 복수 의미를 지닐 수 없 다. 그러면 단수 의미는 어떻게 생성되는가\ulcorner 본 논문에서는 표면적 형태에도 불구하고 [-wh]의미의 겹의문사는 병렬적 관계의 합성어가 아니라 내부구조를 지니지 않은 단순한 단어(minimal $X^{0}$ elements)로 가정한다. 즉, [+wh] 의미의 겹의문사는 동일한 구성요 소를 지닌 병렬적 합성어([$[W1]_{XO-}$ $[W1]_{XO}$ ]

  • PDF

On-Line music score recognition by DPmatching (DP매칭에 의한 On-Line 악보인식)

  • 구상훈;이병선;김수경;이은주
    • Proceedings of the Korea Society of Information Technology Applications Conference
    • /
    • 2002.11a
    • /
    • pp.502-511
    • /
    • 2002
  • 컴퓨터의 기술적 발전은 사회 여러 분야에 막대한 영향을 끼쳤다. 그중 악보 인식분야에도 커다란 영향을 주었다 그러나, On-line 상에서 그린 악보를 실시간으로 정형화된 악보형태로 변환하는 처리에 대한 연구가 미흡하여 이에 대한 연구가 필요하다. 본 논문에서는 실시간으로 악보를 인식하고, 사용자의 편의를 도모하기 위해 DP(Dynamic Programming) 매칭법을 이용한 On-Line 악보인식에 관한 방법을 제안하였다. 본 연구에서는 실시간으로 입력되는 악상기호를 인식하기 위해, 가장 유효한 정보인 악상 기호내의 방향, x, y 좌표를 이용하여 벡터형태로 추출한 후 음표와 비음표(쉼표, 기타기호)의 두개의 그룹으로 나누어진 표준패턴과의 DP매칭을 통해 인식한다. 먼저 tablet을 통해 실시간으로 악상 기호를 입력할 때 생기는 x, y좌표를 이용하여, 펜의 움직임에 대한 16방향 부호화를 수행한다. 음표와 비음표를 구분하기 위한 시간을 줄이고자 16방향 부호화를 적용하치 않고 사사분면부호화를 적용한다. 음표를 약식으로 그릴 경우 음표 머리에 해당하는 부분의 좌표는 삼사분면에 분포하고, 폐곡선의 음표일 경우에는 좌표가 사사분면에 고르게 나타난다. 폐곡선을 제외한 음표의 머리는 폐곡선과 같은 조건이면서 입력받은 y좌표값들 중에서 최소값과 최대값을 구한 다음 2로 나눈 값을 지나는 y좌표의 개수가 임의의 임계값 이상이면 음표로 판단한다. 위 조건을 만족하지 않을 경우 비음표로 취급한다. 음표와 비음표를 결정한 다음, 입력패턴과 표준패턴과의 DP매칭을 통하여 벌점을 구한다. 그리고 경로탐색을 통해 벌점에 대한 각각의 합계를 구해 최소값을 악상기호로 인식 하였다. 실험결과, 표준패턴을 음표와 비음표의 두개의 그룹으로 나누어 인식함으로써 DP 매칭의 처리 속도를 개선시켰고, 국소적인 변형이 있는 패턴과 특징의 수가 다른 패턴의 경우에도 좋은 인식률을 얻었다.r interferon alfa concentrated solution can be established according to the monograph of EP suggesting the revision of Minimum requirements for biological productss of e-procurement, e-placement, e-payment are also investigated.. monocytogenes, E. coli 및 S. enteritidis에 대한 키토산의 최소저해농도는 각각 0.1461 mg/mL, 0.2419 mg/mL, 0.0980 mg/mL 및 0.0490 mg/mL로 측정되었다. 또한 2%(v/v) 초산 자체의 최소저해농도를 측정한 결과, B. cereus, L. mosocytogenes, E. eoli에 대해서는 control과 비교시 유의적인 항균효과는 나타나지 않았다. 반면에 S. enteritidis의 경우는 배양시간 4시간까지는 항균활성을 나타내었지만, 8시간 이후부터는 S. enteritidis의 성장이 control 보다 높아져 배양시간 20시간에서는 control 보다 약 2배 이상 균주의 성장을 촉진시켰다.차에 따른 개별화 학습을 가능하게 할 뿐만 아니라 능동적인 참여를 유도하여 학습효율을 높일 수 있을 것으로 기대된다.향은 패션마케팅의 정의와 적용범위를 축소시킬 수 있는 위험을 내재한 것으로 보여진다. 그런가 하면, 많이 다루어진 주제라 할지라도 개념이나 용어가 통일되지 않고 사용되며 검증되어 통용되는 측정도구의 부재로 인하여 연구결과의 축적이 미비한 상태이다. 따라서, 이에 대한 재고와 새로운 방향 모색이 필요하다고 사료된다.로 사료되며, 임신관련 cytokine에 대한 다양한 연구가 요구되고 있다.₂/Hf(Variable)/Si 계에서 HfO₂ 박막이 Si 기판위에 직접 증착되면, 순수 HfO₂ 박막의

  • PDF