• Korean Journal of Environment and Ecology
• /
• v.30 no.6
• /
• pp.939-961
• /
• 2016

For effective conservation of endangered wild plants, it is necessary to understand their interactions with environmental factors in each habitat together with life traits of target species. First, the characteristics of their distribution were investigated followed by their monitoring for 4 years focusing on the habitats in the lagoon. Also, their life traits were compared including production of hibernacles, fruits, and seeds by the soil fertilization and light intensities. Next, the information on the species was secured by germination experiment using the generated seeds from the cultivation experiment. The habitat of Glaux maritima var. obtusifolia Fernald in Korea was located in the rear edge of the worldwide distribution and its four habitats were isolated and distributed far away each other. Two of them were located in small salt-marsh and fine sand estuaries formed in the rocky area of the seashore, and the other two were inhabited with the sandy soil in the lagoon which was connected by river-mouth to the sea. Glaux maritima var. obtusifolia Fernald tends to be distributed in the sites where the establishment and growth of the competitor were inhibited by salinity, periodic flooding, and lower layer of the soil to extend a roots. It maintained its population by recruitments of hibernacles and seedling. The production of hibernacle was assumed to be affected by the particle consist of the sand together with organic matters in the soil. Seedling recruitment was observed only in the salt-marsh area located in the rear sites of sand ridge where was the shore of the lagoon. Glaux maritima var. obtusifolia Fernald was observed to have different threatening factors by each population. Its population in Pohang seemed the sedimentation of fine sand which affected the recruitment of hibernacles had been eroded due to the construction of the coastal road. The population in Ulsan appeared rapid expansion of competitor and reduction of its distribution area due to the interruption of eluted water supplied to the habitat. On the other hand, the habitat in the lagoon maintained the population relatively stable. Especially, the population in Songji-ho was determined to be the most stable one. To sustain the population of Glaux maritima var. obtusifolia Fernald distributed in the lagoon, it is suggested that the wide ranged scale of conservational activities is necessary to maintain the mechanisms including the entrance of seawater which belongs to the lagoon, and periodic flooding.

• Journal of Animal Science and Technology
• /
• v.46 no.1
• /
• pp.31-38
• /
• 2004

Data from five Hanwoo breeding farms were collected to analyze the effects of parity, season, nutrition and reproduction on body conditions of heifers and cows and to analyze the relationships of body conditions with reproductive performances and body growth. Analytic models included farms and parity which were run through SAS to estimate least squares means and correlation coeflicients between traits body condition scores(BCS) of I(very emaciated) through 9(very obese) scale at service and at calving. calving interval, days to rebreeding, gestation length. number of services per conception. Overall averages were 4.55 for BCS at service, 5.42 for BCS at calving. 406.7days of calving interval, 287.7days of gestation length, 66.2days from calving 10 first service and 1.78 times of services per conception. Number of services per conception was 1.50${\sim}$1.74 times for the cows of BCS 5 or under and 2.00${\sim}$3.00 for those of BCS 6 or higher. Body weight of calves from cows observed averaged 23.3kg at birth and 70.7kg at weaning. 57 percent of cows showed BCS 4${\sim}$5 at service while 46 percent of those showed 5${\sim}$6 at calving. Estimated phenotypic correlation coefficients of BCS at service with BCS at calving, calving interval, gestation length, number of services per conception were low but positive: 0.16, 0.26. 0.08 and 0.06. respectively. Phenotypic correlations of BCS at calving with calving interval, gestation length and number of services per conception were estimated to be also low and positive: 0.10, 0.13 and 0.10. respectively. However, phenotypic correlations between calving interval and gestation length, and between gestation length and number of services per conception were negative but low as - 0.11 and- 0.13 each.

• The Korean Journal of Malacology
• /
• v.19 no.1
• /
• pp.41-51
• /
• 2003

Reproductive cycle with the gonadal development of Ruditapes philippinarum can be classified into five successive stages by histological observations: early active stage (January to March), late active stage (February to May), ripe stage (April to August), partially spawned stage (May to October), and spent/inactive stage (August to February). Changes in total protein contents in the adductor muscle tissues reached the maximum in the early and late active stages (February) and appeared the minimum in the ripe and partially spawned stages (May), while changes in their contents in the visceral mass tissues reached the maximum in the ripe and partially spawned stages (June) and gradually decreased in the partially spawned stage (June to October). On the whole, changes in total protein contents showed a negative correlationship between the adductor muscle and visceral mass tissues (r = -0.292, p < 0.05). Changes in total lipid contents in the adductor muscle tissues reached the maximum in the inactive and early active stages (January) and sharply decreased in the early and late active stages (February), while their contents in the visceral mass tissues reached the maximum in the ripe and partially spawned stages (April) and gradually decreased in the partially spawned stage (to October). On the whole, changes in total lipid contents showed a negative correlationship between the adductor muscle and visceral mass tissues (r = -0.699, p<0.05). Changes in glycogen contents in the adductor muscle tissues reached the maximum in the late active and ripe stages (April) and rapidly decreased in the partially spawned stage (May to October), while their contents in the visceral mass tissues reached the maximum in the early and late active stages (February) and rapidly decreased in the late active stage (March). Thereafter, their levels gradually increased in the ripe and partially spawned stages (April to July). On the whole, changes in glycogen contents appeared no correlationship between the adductor muscle and visceral mass tissues (r = 0.062, p > 0.05). These results indicate that the adductor muscle and visceral mass tissues are an important energy storage and nutrient supply organ in the Manila clams, and the nutrient contents of the adductor muscle and visceral muscle tissues change in response to gonadal energy needs.

• Progress in Medical Physics
• /
• v.22 no.3
• /
• pp.107-116
• /
• 2011

Respiratory gated radiation therapy and stereotactic body radiation therapy require identical tumor motions during each treatment with the motion detected in treatment planning CT. Therefore, this study developed a tumor motion monitoring and analysis system during the treatments employing RPM data, gated setup OBI images and a data analysis software. A respiratory training and guiding program which improves the regularity of breathing was used to patients. The breathing signal was obtained by RPM and the recorded data in the 4D console was read after treatment. The setup OBI images obtained gated at 0% and 50% of breathing phases were used to detect the tumor motion range in crenio-caudal direction. By matching the RPM data recorded at the OBI imaging time, a factor which converts the RPM motion to the tumor motion was computed. RPM data was entered to the institute developed data analysis software and the maximum, minimum, average of the breathing motion as well as the standard deviation of motion amplitude and period was computed. The computed result is exported in an excel file. The conversion factor was applied to the analyzed data to estimate the tumor motion. The accuracy of the developed method was tested by using a moving phantom, and the efficacy was evaluated for 10 stereotactic body radiation therapy patients. For the sine wave motion of the phantom with 4 sec of period and 2 cm of peak-to-peak amplitude, the measurement was slightly larger (4.052 sec) and the amplitude was smaller (1.952 cm). For patient treatment, one patient was evaluated not to qualified to SBRT due to the usability of the breathing, and in one patient case, the treatment was changed to respiratory gated treatment due the larger motion range of the tumor than treatment planed motion. The developed method and data analysis program was useful to estimate the tumor motion during treatment.

• Journal of Korea Spatial Information System Society
• /
• v.3 no.2 s.6
• /
• pp.21-43
• /
• 2001

The environment to development information system including a GIS has been drastically changed in recent years in the perspectives of the complexity and diversity of the software, and the distributed processing and network computing, etc. This leads the paradigm of the software development to the CBD(Component Based Development) based object-oriented technology. As an effort to support these movements, OGC has released the abstract and implementation standards to enable approaching to the service for heterogeneous geographic information processing. It is also common trend in domestic field to develop the GIS application based on the component technology for municipal governments. Therefore, it is imperative to adopt the component technology considering current movements, yet related research works have not been made. This research is to propose a component-based GIS development methodology-ATOM(Advanced Technology Of Methodology)-and to verify its adoptability through the case study. ATOM can be used as a methodology to develop component itself and enterprise GIS supporting the whole procedure for the software development life cycle based on conventional reusable component. ATOM defines stepwise development process comprising activities and work units of each process. Also, it provides input and output, standardized items and specs for the documentation, detailed instructions for the easy understanding of the development methodology. The major characteristics of ATOM would be the component-based development methodology considering numerous features of the GIS domain to generate a component with a simple function, the smallest size, and the maximum reusability. The case study to validate the adoptability of the ATOM showed that it proves to be a efficient tool for generating a component providing relatively systematic and detailed guidelines for the component development. Therefore, ATOM would lead to the promotion of the quality and the productivity for developing application GIS software and eventually contribute to the automatic production of the GIS software, the our final goal.

• The Korean Journal of Malacology
• /
• v.20 no.2
• /
• pp.111-120
• /
• 2004

We investigated the reproductive cycle of Corbicula japonica with its gonadal development by histological observations, and the seasonal changes in biochemical mass and foot muscle of the adductor muscle, visceral mass and foot muscle of the clam by biochemical analysis, from January to December, 2003. The reproductive cycle of this species can be classified into five successive stages: early active stage (February to April), late active stage (April to July), ripe stage (June to August), partially spawned stage (July to September) and spent/inactive stage (September to March). According to ANOVA test, there were significant differences (p < 0.05) in total protein, total lipid and glycogen contents among months for all of the visceral mass, adductor muscle and foot muscle. Total protein content was highest in adductor muscle, while lowest in visceral mass. There was no correlation in total protein content between visceral mass and adductor muscle (p = 0.208). However, strong positive correlation was found between adductor muscle and foot muscle (r = 0.769, p < 0.001). In visceral mass, total lipid content was the highest; it was 2 or 3-fold higher than in adductor muscle or foot muscle. The monthly change was also most dynamic in visceral mass. It decreased from January to March (early active stage), and reached maximum in April (late active stage). From May to August (ripe and partially spawned stage), it dradually decreased and then increased again until October (spent/inactive stage). Multiple comparisons showed that total lipid content in visceral mass between all of the adjacent two months was significaltly different (p < 0.05). There were strong negative correlations in total lipid content between visceral mass and adductor muscle (r = 0.687, p < 0.001), and between visceral mass and foot muscle (r = 0.473, p = 0.008). Changes of glycogen content were more or less similar to the changes of lipid contents in visceral mass, adductor muscle and foot muscle, except for April. In April, glycogen content in visceral mass was over four times higher than that in adductor muscle or foot muscle. There was a positive correlation in glycogen content between adductor muscle and foot muscle (r = 0.686, p < 0.001). Especially, total lipid content showed a negative correlation between the adductor muscle and visceral mass. Therefore, these results indicate that the nutrient content of the adductor muscle, visceral muscle and foot muscle changed in response to gonadal energy needs.

• The Korean Journal of Malacology
• /
• v.22 no.1 s.35
• /
• pp.27-38
• /
• 2006

We investigated the reproductive cycle with gonad developmental phases of Solen grandis by histological observations. Seasonal changes in biochemical components of the adductor muscle, visceral mass, foot muscle and mantle were studied by biochemical analysis, from January to December, 2005. The reproductive cycle of this species can be classified into five successive stages: early active stage (December to January), late active stage (January to March), ripe stage (March to July), partially spawned stage (June to July) and spent/inactive stage (July to December). Total protein content was the highest in the foot muscle, the content was high in January (early active stage), the lowest in April (ripe stage), and was the highest in August (partially spawned stage). In the visceral mass, total protein content began to increase in February (late active stage) and reached a maximum in March (ripe stage). Thereafter, it gradually decreased between June and July (partially spawned stage). There was a strong negative correlation in total protein contents between visceral mass and mantle (r = -0.594, p = 0.042). Meanwhile there was a positive correlation between the adductor muscle and foot muscle, the correlation was not statistically significant (r = 0.507, p = 0.093). Total lipid content was the highest in the visceral mass; it was more than 2 to 5-fold higher than that in the adductor muscle, foot muscle, and mantle. Monthly changes in total lipid content were also most dynamic in the visceral mass. It was relatively higher between January and February, showed a maximum in March (the ripe stage), decreased rapidly from April to July (ripe and partially spawned stage), and gradually decreased from September to December (spent/inactive stage). There was a strong positive correlation in total lipid content between foot muscle and adductor muscle (r = 0.639, p = 0.025). Tthough a negative correlation was found between visceral mass and mantle (r = -0.392), the correlation was not statistically significant (p = 0.208). Glycogen contents changed within relatively narrow range and were similar among different tissues. There was no statistically significant correlation in glycogen contents among tissues.

• Economic and Environmental Geology
• /
• v.48 no.2
• /
• pp.147-160
• /
• 2015

In 2014, on 31 August and 1 September, the emissions of $CH_4$, $CO_2$, and $O_2$ gases were measured six times using the closed chamber method from exposed tidal flat sediments in the same position relative to the low point of the tidal cycle in the Eoeun-ri, Taean-gun, on the Mid-western Coast of Korea. The concentrations of $CH_4$ in the air sample collected in the chamber were measured using gas chromatography with an EG analyzer, model GS-23, within 6 hours of collection, and the other gases were measured in real time using a multi-gas monitor. The gas emission fluxes (source (+), and sink (-)) were calculated from a simple linear regression analysis of the changes in the concentrations over time. In order to see the surrounding parameters (water content, temperature, total organic carbon, average mean size of sediments, and the temperature of the inner chamber) were measured at the study site. On the first day, across three measurements during 5 hours 20 minutes, the observed $CO_2$ flux absorption was -137.00 to $-81.73mg/m^2/hr$, and the $O_2$ absorption, measured simultaneously, was -0.03 to $0.00mg/m^2/hr$. On the second day using an identical number of measurements, the $CO_2$ absorption was -20.43 to $-2.11mg/m^2/hr$, and the $O_2$ absorption -0.18 to $-0.14mg/m^2/hr$. The $CH_4$ absorption before low tide was $-0.02mg/m^2/hr$ (first day, Pearson correlation coefficient using the SPSS statistical analysis is -0.555(n=5, p=0.332, pronounced negative linear relationship)), and $-0.15mg/m^2/hr$ (second day, -0.915(n=5, p=0.030, strong negative linear relationship)) on both measurement days. The emitted flux after low tide on both measurement days reached a minimum of $+0.00mg/m^2/hr$ (+0.713(n=5, p=0.176, linear relationship which can be almost ignored)), and a maximum of $+0.03mg/m^2/hr$ (+0.194(n=5, p=0.754, weak positive linear relationship)) after low tide. However, the absolute values of the $CH_4$ fluxes were analyzed at different times. These results suggest that rate for $CH_4$ fluxes, even the same time and area, were influenced by changes in the tidal cycle characteristics of surface sediments for understanding their correlation with these gas emissions, and surrounding parameters such as physiochemical sediments conditions.

• Journal of Animal Science and Technology
• /
• v.49 no.5
• /
• pp.677-688
• /
• 2007

돼지를 포함한 대부분의 동물은 일정한 발정주기를 가지고 일정한 시기에 배란을 하는 자연배란동물이지만, 토끼, 고양이, 밍크 등의 암놈은 교미자극에 의해 배란이 일어나는 유기배란동물이다. 또한 1년에 한 번만 발정하는 단발정동물과 1년에 수차례 발정하는 다발정동물이 있다. 이 중에서 모돈은 1년에 수차례 발정하는 다발정 동물로서 발정기에 들면 비발정기와는 다른 행동을 나타낸다(Diehl 등, 2001). 양돈가의 수익을 최대화하기 위해서는 비생산일수를 최소로 줄여야 한다. 모돈의 비생산일수를 줄일 수 있는 한 가지 방법은 성공적으로 교배를 시키는 것이다. 이처럼 성공적으로 교배를 시키기 위해서는 수정적기를 정확히 예측해야 한다. 만약 수정적기를 정확히 판단하지 못하여 수태가 되지 않으면, 비생산일수가 늘어나 손실을 입게 된다. 따라서 수정적기를 정확히 판단하는 것은 모돈의 성공적인 인공수정에 있어서 중요한 요소이다. 수정적기는 배란이 일어나기 전 10시간에서 12시간 사이이며, 발정이 시작되는 시점을 기준으로 하였을 때 경산돈의 경우 26시간에서 34시간 사이이고 미경산돈의 경우는 18시간에서 26시간 사이이다(Evans 등, 2001). 현재 하루에 두 번 모돈의 발정을 확인하는 것이 일반화되어 있으며, 이 때 웅돈을 접촉시키거나 육안관찰을 통하여 발정 유무를 판단한다. 이러한 방법에는 숙련된 기술과 풍부한 경험이 요구될 뿐만 아니라 총 소요노동력의 30% 정도가 요구된다(Perez 등, 1986). 하루에 두 번밖에 발정을 감지하지 않기 때문에 발정이 언제 시작되었는지를 정확히 알 수 없으며, 또한 발정의 대부분이 새벽에 시작되므로 수정적기를 정확히 판단하기란 매우 어렵다. 만약 발정을 감지했더라도 적기에 인공수정을 하지 못한다면, 수태율이 낮아지므로 경제적 손실이 초래된다. 현재 이러한 문제점 때문에 2회에서 3회에 걸쳐 인공수정을 하고 있으나 이에 따른 소요비용과 소요노동력 등은 양돈가의 부담을 가중시키는 요인이 되고 있다. 돼지는 발정기가 되면 비발정기에 나타내지 않던 외음부의 냄새를 맡는 행동, 귀를 세우는 행동 및 승가허용 행동 등을 나타낸다(Diehl 등, 2001). 또한 돼지는 비발정기에 비하여 발정기에 더 많은 활동량을 나타낸다(Altman, 1941; Erez and Hartsock, 1990). Freson 등(1998)은 스톨에서 개별적으로 사육되고 있는 모돈의 활동량을 적외선센서를 이용하여 측정함으로써 발정을 86%까지 감지하였다고 보고하였다. 그러나 이 연구는 단지 모돈의 발정을 감지하였을 뿐 번식관리에 있어서 가장 중요한 수정적기의 판단 기준을 제시하지 못하였다. 따라서, 본 연구는 스톨에서 사육되는 모돈의 활동량을 측정함으로써 발정시작시각을 감지하고 이를 기준으로 인공수정적기를 예측할 수 있는 인공수정적기 예측 장치를 개발한 후 이의 성능을 농장실증실험을 통하여 시험하고자 수행되었다.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.6
• /
• pp.185-196
• /
• 2015

Energy aware server clusters aim to reduce power consumption at maximum while keeping QoS(Quality of Service) compared to energy non-aware server clusters. They adjust the power mode of each server in a fixed or variable time interval to let only the minimum number of servers needed to handle current user requests ON. Previous studies on energy aware server cluster put efforts to reduce power consumption further or to keep QoS, but they do not consider energy efficiency well. In this paper, we propose an energy efficient cluster management based on autonomous learning for energy aware server clusters. Using parameters optimized through autonomous learning, our method adjusts server power mode to achieve maximum performance with respect to power consumption. Our method repeats the following procedure for adjusting the power modes of servers. Firstly, according to the current load and traffic pattern, it classifies current workload pattern type in a predetermined way. Secondly, it searches learning table to check whether learning has been performed for the classified workload pattern type in the past. If yes, it uses the already-stored parameters. Otherwise, it performs learning for the classified workload pattern type to find the best parameters in terms of energy efficiency and stores the optimized parameters. Thirdly, it adjusts server power mode with the parameters. We implemented the proposed method and performed experiments with a cluster of 16 servers using three different kinds of load patterns. Experimental results show that the proposed method is better than the existing methods in terms of energy efficiency: the numbers of good response per unit power consumed in the proposed method are 99.8%, 107.5% and 141.8% of those in the existing static method, 102.0%, 107.0% and 106.8% of those in the existing prediction method for banking load pattern, real load pattern, and virtual load pattern, respectively.