• The Journal of the Acoustical Society of Korea
• /
• v.14 no.1E
• /
• pp.56-64
• /
• 1995

The least mean fourth (LMF) adaptive algorithm is a stochastic gradient method that minimizes the error in the mean fourth sense. Despite its potential advantages, the algorithm is much less popular than the conventional least mean square (LMS) algorithm in practice. This seems partly because the analysis of the LMF algorithm is much more difficult than that of the LMS algorithm, and thus not much still has been known about the algorithm. In this paper, we explore the statistical convergence behavior of the LMF algorithm when the input to the adaptive filter is zero-mean, wide-sense stationary, and Gaussian. Under a system idenrification mode, a set of nonlinear evolution equations that characterizes the mean and mean-squared behavior of the algorithm is derived. A condition for the conbergence is then found, and it turns out that the conbergence of the LMF algorithm strongly depends on the choice of initial conditions. Performances of the LMF algorithm are compared with those of the LMS algorithm. It is observed that the mean convergence of the LMF algorithm is much faster than that of the LMS algorithm when the two algorithms are designed to achieve the same steady-state mean-squared estimation error.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.3
• /
• pp.224-232
• /
• 2003

In this paper, efficient deployment method of sensors and target positioning performance with respect to measurement error are dealt with. Active sonar can be categorized into Monostatic, Bistatic, Multistatic sonar, and characteristics of respective sonar are different. Assuming that each sensor can receive range and angular information, we compare the performance of Monostatic, Bistatic, and Multistatic systems. And we suggest Weighted least square (WLS) which gives the weight to former case, LS. In particular. adopting suggested method we investigate the target positioning performance according to number of sensor, distance from transmitter to receiver, and propose efficient arrangement rule for Multistatic sonar configurations. According to the experimental results, RMSE of Multistatic sonar is found to be superior to Monostatic and Bistatic by 35.98%. 37.45% respectively, and WLS is superior to LS approximately by 7.4% in average. Furthermore, as the difference of respective sensor's variance is large, it is observed that the improvement ratio of target positioning performance is increased.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.117-120
• /
• 1999

본 논문은 희소어레이의 패턴을 원하는 패턴과 실제 희소어레이의 패턴간의 오차의 계수적 자승치를 최소화하여 최적화하는 방법을 제시한다 센서의 간격이 어레이 중심에 관하여 대칭인 경우와 비대칭인 경우에 대하여 성능을 점검하며, 어레이 공간의 주어진 영역의 오차함수에 성능 향상을 위하여 계수를 적용한다. 주빔 부근의 측면롭의 효과적인 제어를 위하여 지수 함수적인 계수를 제안하였으며 그 결과 측면롭의 수준이 전체적으로 균등하게 분포되는 패턴을 얻을 수 있었다. 이 결과는 입력잡음신호가 어레이 공간상에 균등하게 입사될 때 효과적으로 사용될 수 있다.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.6 s.79
• /
• pp.727-736
• /
• 2005

This study presents a method of determining the optimum cable tension forces for the proper initial equilibrium state of a cable-stayed bridge using the least square method. The proposed method minimizes the errors, i.e., the differences, such as the deflection and the moments of the girder and the tower, between the target values from a continuous beam by considering the cable anchor point as supports of the girder and the responses obtained from the analysis of the entire cable-stayed bridge system. Especially, the proposed method can selectively control the adjustment of the tower moment, the girder moment, and the deflections by introducing the weighing matrix. Through numerical analysis and comparisons with existing studies, the usefulness and validity of the proposed method was verified.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4B
• /
• pp.309-316
• /
• 2012

The compensation algorithm for localization using the least-squires method in NLOS(Non Line of Sight) environment is suggested and the performance of the algorithm is analyzed in this paper. In order to improve the localization correction rate of the moving node, 1) the distance value of the moving node that is moving as an constant speed is measured by SDS-TWR(Symmetric Double-Sided Two-Way Ranging); 2) the location of the moving node is measured using the triangulation scheme; 3) the location of the moving node measured in 2) is compensated using the least-squares method. By the experiments in NLOS environment, it is confirmed that the average localization error rates are measured to ${\pm}1m$, ${\pm}0.2m$ and ${\pm}0.1m$ by the triangulation scheme, the Kalman filter and the least-squires method respectively. As a result, we can see that the localization error rate of the suggested algorithm is higher than that of the triangulation as average 86.0% and the Kalman filter as average 16.0% respectively.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.94-98
• /
• 2012

In order to serve the exact torque clamping force, the torque measurement system use the curve fitting algorithm by the least square. The corrected least square curve fitting algorithm which suggested in this paper can surpport more exact clamping force for fastner in variable industry field using the torque. At first, This paper introduces mathematical modeling for curve fitting algorithm, and simulate it. As a result, the corrected least square algorithm have shown lower standard error value than that of the used algoritm with torque, and so this corrected least square algorithm prove high accuracy than nomal least square algorithm. The suggested algorithm will contribute to improvement of cost and safety on industry field with bolt clamping force for precision industry parts, electronics parts, aircraft, aerospace, etc.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.51-53
• /
• 2001

전력 수요 예측은 전력 수급 안정과 양질의 전력을 공급하기 위한 필수 기법이며 경쟁적인 전력시장에서 전력요금과 밀접한 관련이 있다. 그러므로, 경쟁적인 전력시장 구조하의 시장 참여자에게 있어서 전력 수요 예측은 매우 관심 있는 사항이다. 최근의 전력 수요 예측 기법으로 예측한 오차율을 살펴보면 평일과는 다르게 특수일의 전력 수요예측은 평균 5%를 상회하는 수준으로 예측의 정확도가 평일 예측에 비해 크게 낮은데 이유는 특수일이 평일에 비하여 부하의 크기가 다소 낮게 나타나고 특수일 마다 계절적인 차이가 있으며 각각의 특수일 마다 고유한 부하의 특성이 있으므로 과거 데이터를 이용할 때 동일 특수일을 이용하게 되며 따라서 평일과는 다르게 일년 단위로 과거 데이터 값들이 취득되므로 오차율이 커진다. 따라서 데이터들을 퍼지화하여 선형계획법을 수행하여 평균 $2{\sim}3%$ 정도의 우수한 결과를 도출한 바 있다. 본 논문에서는 퍼지 선형회귀분석법을 이용한 예측 기법에 최소자승법을 도입하여 특수일 전력 수요예측의 정확도를 개선하였다.

• Journal of Korea Water Resources Association
• /
• v.31 no.6
• /
• pp.675-684
• /
• 1998

This paper presents the empirical formulas for determining the design-width for medium rivers in the Han river basin. The design flood, the watershed ares, and the channel slope of 216 medium rivers in the Han river basin are collected. the design width formulas are then determined by 1) the least squares (LS) method, 2)the least median squares (LMS) method, and 3) the reweighted least squares method based on the LMS (RLS). The six types of formulas are considered to determine the acceptable type for medium streams in the Han river basin. The root mean squared errors (RMSE), the absolute mean (AME) errors, and the mean errors (ME) are computed to test the formulas derived by three regression methods. It si found that the equation related stream width to the watershed area and the channel slope is acceptable for determining the design width for medium streams in the Han river basin. It is expected that the equations proposed by this study be used an index for determining the design-width for medium streams in the Han river basin.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.10
• /
• pp.2303-2309
• /
• 1997

This paper presents a convergence analysis of the stocastic gradient adaptive algorithm based on the least mean absolute third (LMAT) error criteriohn. Under the assumption that the signals involved are zero-mean, wide-sense sateionaryand gaussian, a set of nonlinear difference equations that characterizes the mean and mean-squared behavior of the algorithm is derived. Computer simulation resutls show fairly good agreements between the theoetical and empirical behaviors of the algorithm.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.8
• /
• pp.723-731
• /
• 2009

In this paper, we propose a novel sound field reconstruction algorithm using a three dimensional loudspeaker array for providing realistic sound field to multiple listeners. The proposed algorithm is based on minimization of the squared error between the original sound field and the reconstructed sound field by the loudspeaker array over a predefined three dimensional region of the space using a loudspeaker array surrounding the listening area. For evaluating the proposed algorithm, we constructed the three dimensional array composed of 40 loudspeakers and discuss the relevant experiment results.