• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.9A
• /
• pp.1005-1012
• /
• 2004

In this paper, we have analyzed minimum performance required for W-CDMA Handset from standard and Implemented the receiver for W -COMA Handset. We have derived the noise figure and IIP3 of receiver and determined the selectivity about adjacent channel and minimum performance for front-end stage. Before the Implementation, we have verified the performance using AOS simulator In conclusion, we have implemented the receiver for W-COMA Handset using the heterodyne architecture and performed measurement. Therefore, this paper wlll gIVe a guideline for design of the W -COMA Handset.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.10
• /
• pp.11-15
• /
• 2015

In this paper, we introduce three modulation codes of the code rate 1/2 with different minimum distances, respectively, and investigate the performance of the codes according to the minimum distance. We simulate the codes in accordance with blur and misalignment. As the minimum distance increases, the complexity of encoder and decoder also grows. However, it can improve the error correcting capability and shows good performance with blur and misalignment.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.5
• /
• pp.879-886
• /
• 2009

The purpose of this article is to present the application of Least Squares Support Vector Machine in analyzing the existing structure of brand. We estimate the parameters of the Market Share Attraction Model using a non-parametric technique for function estimation called Least Squares Support Vector Machine, which allows us to perform even nonlinear regression by constructing a linear regression function in a high dimensional feature space. Estimation by Least Squares Support Vector Machine technique makes it a good candidate for solving the Market Share Attraction Model. To illustrate the performance of the proposed method, we use the car sales data in South Korea's car market.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.3
• /
• pp.35-44
• /
• 2017

In this study, steel fiber-reinforced concrete beams with ordinary steel reinforcements, that are below minimum steel reinforcement amount specified in domestic concrete structure design code, were tested in flexure until failure. Steel reinforcement ratio considered were 44%, 66%, 78% and 100% of the minimum steel reinforcement. Considered steel fiber volume fractions were 0.25%, 0.50%, 0.75% and 1.00%. In results, it is confirmed that steel fibers greatly improve crack performance. Also, the steel fibers contributed to increment in yield load not in ultimate load. But the increment was not greater than the reduction by steel reinforcement reduction. The use of steel fibers in RC beams lightly reinforced below the minimum reinforcement ratio specified design code reduced ductility greatly. Consequently, steel reinforcement ratio in steel fiber-reinforced beams lightly reinforced below the minimum steel reinforcement should be increased in order to enhance proper ductility.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06d
• /
• pp.453-455
• /
• 2012

본 논문에서는 유 무선 이종망의 네트워크에서 혼잡손실과 무선손실의 구별을 하지 못하고 전송률을 감소하는 TFRC의 성능을 개선하기 위한 최소 전송률을 보장하는 TFRC 제어방법을 제안한다. 제안 하는 TFRC기법은 기존의 TFRC 기법의 패킷손실률에 따른 loss event rate를 제한하고 피드백 타임아웃에 따른 전송률 감소를 제한하여 비디오의 최소전송률을 보장하는 방법이다. TCP와 제안하는 TFRC를 같은 네트워크망에서 경쟁하는 환경으로 실험 했을 때 기존의 TFRC와 비교해서 제안한 TFRC의 전송률이 보장되어 더 좋은 성능을 보였다. 무선구간에서의 손실까지도 혼잡손실로 판단하고 전송률을 감소시켜 다중 네트워크에서 대역폭을 보장받지 못하는 TFRC기법을 최소전송률 보장을 통해 비디오 스트리밍 서비스를 제공함으로써 서비스의 품질을 보장한다.

• Journal of the Society of Disaster Information
• /
• v.17 no.1
• /
• pp.97-111
• /
• 2021

Purpose: It is expected that various infrastructures diagnosis equipment will be needed as infrastructures management is strengthened to implement the Framework Act on Sustainable Infrastructure Management. It is necessary for a certification system to supply certified products of a reasonable level in accordance with market requirements for various convergence equipment. This paper deals with the introduction of certification system of inspection and diagnosis equipment for infrastructure using advanced technologies. Method: The basic elements, systems and procedures of certification system were reviewed through analyzing and comparing the existing similar certification system in Korea. In addition, a survey was conducted on a catalog method and the minimum performance criterion (sampling survey and complete enumeration survey) to equipment developers (manufacturers), clients and equipment users. Result: This survey showed that clients preferred complete enumeration method on the basis of minimum performance, and equipment users also preferred complete enumeration survey and sample survey, for minimum performance, at a similar rate. On the other hand, equipment developers preferred the catalog method. Conclusion: Clients and users who are the users of the diagnostic equipment preferred the minimum performance criterion because their trust in quality is important. On the other hand, developers(manufacturers) preferred the catalog method which adopts self certification because it is regulated in developing various products. There is no specific plan for the minimum performance standards required for the introduction of the method which users demand, at present. In addition, it is not desirable to force to introduce a certification system because it requires a considerable period of study to prepare the specific standards. Therefore, it is appropriate to operate the system for a certain period of time centering around the catalog method for the stable and continuous development of the infrastructure diagnosis and test equipment market in Korea. Also, it is effective to expand and develop the certification system to the extent that it minimizes the impact on the market when specific plans for the standards are prepared in the future.

• The KIPS Transactions:PartC
• /
• v.8C no.2
• /
• pp.207-212
• /
• 2001

본 논문에서는 호핑 방식을 사용한 블록 인터리버에 대해 연구하였다, 인터리버의 성능은 인접 데이터간 최소 거리에 이해 결정되어지므로, 인접 데이터간 최소 거리를 증가시키는 방법으로 인터리버의 성능을 향상 시켰다. 기존의 블록 인터리버는 메모리의 입/출력이 행과 열에 대해 차례대로 이루어지는 반면, 본 연구에서 제안된 방식은 행과 열을 건너뛰면서 입/출력이 이루어지므로 인접 데이터간 최소거리와 평균거리를 증가시킨다. 제안하는 인터리버의 또 다른 장점으로는 다양한 호핑 방식의 사용이 가능하다는 것이다. 제안된 인터리버의 성능 분석과 비교를 위해 가우시안 잡음 환경 하에서 컴퓨터 모의 실험을 하였다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.6
• /
• pp.70-75
• /
• 2000

This paper examines the performance of adaptive filtering algorithms in relation to the asymptotic relative efficiency (ARE) of estimators. The adaptive filtering algorithms are Hybrid II and modified zero forcing (MZF) algorithms. The Hybrid II and MZF algorithms are simplified forms of the LMS algorithm, which use the polarity of the input signal, and polarities of the error and input signals, respectively. The ARE of estimators for each algorithm is analyzed under the condition of the same convergence speed. Computer simulations for adaptive equalization are performed to check the validity of the theory. The explicit expressions for the ARE values of the Hybrid II and MZF algorithms are derived, and its results have similar values to the results of computer simulation. It also revealed that the ARE values depend on the correlation coefficients between input signal and error signal.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.207-213
• /
• 2006

In this paper, we reduce the computational complexity to find the minimum distance of RA codes by searching only valid codewords using repetition part. Since LDPC codes have repetition part like RA codes, we also apply this algorithm for computing the minimum distance of LDPC codes. The minimum distance dominates the code performance at high signal-to-noise ratios(SNRs) and in turn allows an estimate of the error floor. The proposed algorithm computes the minimum distance without any constraint on code structures. The minimum distances of LDPC codes and RA codes with large interleavers of practical importance are computed and used to obtain the error floor, which is compared with the performance of the iterative decoding.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.193-196
• /
• 2000

본 논문은 희소어레이의 패턴을 원하는 패턴과 실제 희소어레이의 패턴간의 오차의 계수적 자승치를 미세탐색을 이용하여 최소화하여 최적화하는 방법을 제시한다. 센서의 간격이 어레이 중심에 관하여 대칭인 경우와 비대칭인 경우에 대하여 성능을 점검하며, 어레이 공간의 주어진 영역의 오차함수에 성능 향상을 위하여 계수를 적용한다. 미세탐색을 이용함으로써 계수 최소 방법의 성능이 주빔 부근의 측면롭에 관련하여 향상되는 것이 판명되었다.